Abstract
This chapter describes the micro-structural evolution and grain refinement process of AISI 304 SS subjected to multiple LSP impacts by means of cross-sectional optical microscopy and transmission electron microscopy observations, and reveals the plastic strain-induced grain refinement mechanism of FCC materials with very low stacking fault energy.
Access this chapter
Tax calculation will be finalised at checkout
Purchases are for personal use only
References
Lindemann, J., Buque, C., & Appel, F. (2006). Effect of shot peening on fatigue performance of a lamellar titanium aluminide alloy. Acta Materialia, 54(4), 1155–1164.
Bhattacharjee, P. P., Ray, R. K., & Tsuji, N. (2009). Cold rolling and recrystallization textures of a Ni–5 at % W alloy. Acta Materialia, 57(7), 2166–2179.
Venugopal, T., Rao, K. P., & Murty, B. S. (2007). Mechanical and electrical properties of Cu–Ta nanocomposites prepared by high-energy ball milling. Acta Materialia, 55(13), 4439–4445.
Lin, Y. M., Lu, J., Wang, L. P., Xu, T., & Xue, Q. J. (2006). Surface nanocrystallization by surface mechanical attrition treatment and its effect on structure and properties of plasma nitrided AISI 321 stainless steel. Acta Materialia, 54(20), 5599–5605.
Montross, C. S., Ye, L., Wei, T., Clark, G., & Mai, Y. W. (2002). Laser shock processing and its effects on microstructure and properties of metal alloys: A review. International Journal of Fatigue, 24, 1021–1036.
Meyers, M. A., Gregori, F., Kad, B. K., Schneider, M. S., Kalantar, D. H., Remington, B. A., et al. (2003). Laser-induced shock compression of monocrystalline copper: Characterization and analysis. Acta Materialia, 51(5), 1211–1228.
Zhang, H., & Yu, C. Y. (1998). Laser shock processing of 2024–T62 aluminum alloy. Materials Science and Engineering A, 257, 322–327.
Zhang, Y. K., Hu, C. L., Cai, L., Yang, J. C., & Zhang, X. R. (2001). Mechanism of improvement on fatigue life of metal by laser-excited shock waves. Applied Physics A, 72(2), 113–116.
Yilbas, B. S., Shuja, S. Z., Arif, A., & Gondal, M. A. (2003). Laser-shock processing of steel. Journal of Materials Processing Technology, 135(1), 6–17.
Srinivasan, S., Garcia, D. B., Gean, M. C., Murthy, H., & Farris, T. N. (2009). Fretting fatigue of laser shock peened Ti–6Al–4 V. Tribology International, 42(9), 1324–1329.
Nikitin, I., & Altenberger, I. (2007). Comparison of the fatigue behavior and residual stress stability of laser-shock peened and deep rolled austenitic stainless steel AISI 304 in the temperature range 25–600 °C. Materials Science and Engineering A, 465(1–2), 176–182.
Peyre, P., Scherpereel, X., Berthe, L., Carboni, C., Fabbro, R., Béranger, G., et al. (2000). Surface modifications induced in 316L steel by laser peening and shot-peening. Influence on pitting corrosion resistance. Materials Science and Engineering A, 280(2), 294–302.
Nikitin, I., Scholtes, B., Maier, H. J., & Altenberger, I. (2004). High temperature fatigue behavior and residual stress stability of laser-shock peened and deep rolled austenitic steel AISI 304. Scripta Materialia, 50(10), 1345–1350.
Sano, Y. J., Obata, M., Kubo, T., Mukai, N., Yoda, M., Masaki, K., et al. (2006). Retardation of crack initiation and growth in austenitic stainless steels by laser peening without protective coating. Materials Science and Engineering A, 417(1–2), 334–340.
Mordyuk, B. N., Milman, Y. V., Iefimov, M. O., Prokopenko, G. I., Silberschmidt, V. V., Danylenko, M. I., et al. (2008). Characterization of ultrasonically peened and laser-shock peened surface layers of AISI 321 stainless steel. Surface and Coatings Technology, 202(19), 4875–4883.
Masse, J. E., & Barreau, G. (1995). Surface modification by laser induced shock waves. Surface Engineering, 11, 131–142.
Ding, K., & Ye, L. (2003). Three-dimensional dynamic finite element analysis of multiple laser shock peening processes. Surface Engineering, 19(5), 351–358.
Chu, J. P., Rigsbee, J. M., Banas′, G., & Elsayed-Ali, H. E. (1999). Laser-shock processing effects on surface microstructure and mechanical properties of low carbon steel. Materials Science and Engineering A, 260, 260–268.
Lu, J. Z., Luo, K. Y., Zhang, Y. K., Cui, C. Y., Sun, G. F., Zhou, J. Z., et al. (2010). Grain refinement of LY2 aluminum alloy induced by ultra-high plastic strain during multiple laser shock processing impacts. Acta Materialia, 58(11), 3984–3994.
Tan, Y., Wu, G., Yang, J. M., & Pan, T. (2004). Laser shock peening on fatigue crack growth behavior of aluminum alloy. Fatigue and Fracture of Engineering Materials and Structures, 27(8), 649–656.
Arif, A. F. M. (2003). Numerical prediction of plastic deformation and residual stresses induced by laser shock processing. Journal of Materials Processing Technology, 136, 120–138.
Tao, N. R., Wang, Z. B., Tong, W. P., Sui, M. L., Lu, J., & Lu, K. (2002). An investigation of surface nanocrystallization mechanism in Fe induced by surface mechanical attrition treatment. Acta Materialia, 50(18), 4603–4616.
Sun, H. Q., Shi, Y. N., Zhang, M. X., & Lu, K. (2007). Plastic strain-induced grain refinement in the nanometer scale in a Mg alloy. Scripta Mateialia, 55, 975–982.
Wen, M., Liu, G., Gu, J. F., Guan, W. M., & Lu, J. (2009). Dislocation evolution in titanium during surface severe plastic deformation. Applied Surface Science, 255(12), 6097–6102.
Tao, N. R., & Lu, K. (2009). Nanoscale structural refinement via deformation twinning in face-centered cubic metals. Scripta Materialia, 60(12), 1039–1043.
Wu, X., Tao, N., Hong, Y., Liu, G., Xu, B., Lu, J., et al. (2005). Strain-induced grain refinement of cobalt during surface mechanical attrition treatment. Acta Materialia, 53(3), 681–691.
Zhang, H. W., Hei, Z. K., Liu, G., Lu, J., & Lu, K. (2003). Formation of nanostructured surface layer on AISI 304 stainless steel by means of surface mechanical attrition treatment. Acta Materialia, 51(7), 1871–1881.
Eddahbi, M., Del Valle, J. A., P’erez-Prado, M. T., & Ruano, O. A. (2005). Comparison of the microstructure and thermal stability of an AZ31 alloy processed by ECAP and large strain hot rolling. Materials Science and Engineering A, 410–411, 308–311.
Wang, Y. B., Louie, M., Cao, Y., Liao, X. Z., Li, H. J., Ringer, S. P., et al. (2010). High-pressure torsion induced microstructural evolution in a hexagonal close-packed Zr alloy. Scripta Materialia, 62(4), 214–217.
Wang, K., Tao, N. R., Liu, G., Lu, J., & Lu, K. (2006). Plastic strain-induced grain refinement at the nanometer scale in copper. Acta Materialia, 54(16), 5281–5291.
Zhang, X. C., Zhang, Y. K., Lu, J. Z., Xuan, F. Z., Wang, Z. D., & Tu, S. D. (2010). Improvement of fatigue life of Ti-6Al-4 V alloy by laser shock peening. Materials Science and Engineering A, 527(15), 3411–3415.
Belyakov, A., Tsuzaki, K., Miura, H., & Sakai, T. (2003). Effect of initial microstructures on grain refinement in a stainless steel by large strain deformation. Acta Materialia, 51(3), 847–861.
Kuhlmann-Wilsdorf, D., & Van der Merwe, J. H. (1982). Theory of dislocation cell size in deformed metals. Materials Science and Engineering, 55, 79–83.
Schino, A. D., & Kenny, J. M. (2003). Grain size dependence of the fatigue behavior of a ultrafine-grained AISI 304 stainless steel. Materials Letters, 57(21), 3182–3185.
Author information
Authors and Affiliations
Corresponding author
Rights and permissions
Copyright information
© 2013 Springer-Verlag Berlin Heidelberg
About this chapter
Cite this chapter
Zhang, Y., Lu, J., Luo, K. (2013). Grain Refinement of AISI 304 SS Induced by Multiple Laser Shock Processing Impacts. In: Laser Shock Processing of FCC Metals. Springer Series in Materials Science, vol 179. Springer, Berlin, Heidelberg. https://doi.org/10.1007/978-3-642-35674-2_8
Download citation
DOI: https://doi.org/10.1007/978-3-642-35674-2_8
Published:
Publisher Name: Springer, Berlin, Heidelberg
Print ISBN: 978-3-642-35673-5
Online ISBN: 978-3-642-35674-2
eBook Packages: Chemistry and Materials ScienceChemistry and Material Science (R0)