Abstract
Torque-angle tightening is widely used in the internal combustion engine. Actually, Torque-angle tightening is an indirect method of length measurement tightening, used to make the bolt’s plastic elongation rate right after tightening. Usually, the bolt’s plastic elongation after tightening could only be measured by experiments. We researched on how to calculate the plastic elongation of the bolt after tightening when both elastic and plastic elongation occur, considering the tolerance of the torque and angle. What is the most important point but never be mentioned in most of the research.
F2012-A06-016
Access this chapter
Tax calculation will be finalised at checkout
Purchases are for personal use only
References
Daxian C Handbook of mechanical design, 5th edn. Vol 2
Systematic calculation of high duty bolted joints, joints with one cylindrical bolt VDI2230 part 1, 2003
Zhang Q (2003) Research of tightening technology of cylinder head bolt, part 2, automotive technology
Li W, Zhuang M (2005) Research on the application of angle tighten at yield area. In: Automotive powertrain conference, 2005
Author information
Authors and Affiliations
Corresponding author
Editor information
Editors and Affiliations
Rights and permissions
Copyright information
© 2013 Springer-Verlag Berlin Heidelberg
About this paper
Cite this paper
Zhan, W., Wu, J., Shao, F., Huang, C. (2013). Research on Torque-Angle Tightening of High Strength Bolt in Internal Combustion Engine. In: Proceedings of the FISITA 2012 World Automotive Congress. Lecture Notes in Electrical Engineering, vol 190. Springer, Berlin, Heidelberg. https://doi.org/10.1007/978-3-642-33750-5_9
Download citation
DOI: https://doi.org/10.1007/978-3-642-33750-5_9
Published:
Publisher Name: Springer, Berlin, Heidelberg
Print ISBN: 978-3-642-33749-9
Online ISBN: 978-3-642-33750-5
eBook Packages: EngineeringEngineering (R0)