Abstract
Hybrid parts are defined by the combination of different materials and/or manufacturing technologies. Several examples can identify the usage of hybrid concepts: adding metal inserts to plastic parts (therefore making the parts provide increased strength and resistance); adding soft type material to hard plastic (squeak and rattle avoidance, meet seal-off requirements); replacement of steel with aluminium and magnesium based alloys; replacement of metal components with composite counterparts. Further improvements are possible by upgrading from 2 k type concepts to 3–4 k hybrids and replacing multiple component assemblies with a single hybrid structure that may consist of plastic, (heavy/light) metal, composites, foam/textures. Present paper presents (i) a general concept that is being used to define new, innovative solutions addressing functionality required for components, and (ii) presents an actual example of a part that was redesigned and optimized, achieving increased performance, lower cost, and reduce weight.
F2012- H01-006
Access this chapter
Tax calculation will be finalised at checkout
Purchases are for personal use only
Similar content being viewed by others
References
Cui X, Wang S, Hu SJ (2008) A method for optimal design of automotive body assembly using multi-material construction. Mater Des 29:381–387
Gibson RF (2010) A review of recent research on mechanics of multifunctional composite materials and structures. Compos Struct 92:2793–2810
Hufenbach W, Böhm R, Thieme M, Winkler A, Mäder E, Rausch J, Schade M (2011) Polypropylene/glass fibre 3D-textile reinforced composites for automotive applications. Mater Des 32:1468–1476
Perry N, Bernard A, Laroche F, Pompidou S (2012) Improving design for recycling—application to composites. CIRP Ann Manuf Technol 61:151–154
Sayer M, Bektas NB, Sayman O (2010) An experimental investigation on the impact behavior of hybrid composite plates. Compos Struct 92:1256–1262
Zhang J, Chaisombat K, He S, Wang CH (2012) Hybrid composite laminates reinforced with glass/carbon woven fabrics for lightweight load bearing structures. Mater Des 36:75–80
Abu Talib AR, Ali A, Badie MA, Lah NAC, Golestaneh AF (2010) Developing a hybrid, carbon/glass fiber-reinforced, epoxy composite automotive drive shaft. Mater Des 31:514–521
Davoodi MM, Sapuan SM, Ahmad D, Aidy A, Khalina A, Jonoobi M (2011) Concept selection of car bumper beam with developed hybrid bio-composite material. Mater Des 32:4857–4865
Sokolova OA, Carradň A, Palkowski H (2011) Metal–polymer–metal sandwiches with local metal reinforcements: a study on formability by deep drawing and bending. Compos Struct 94:1–7
Tan CY, Akil HM (2012) Impact response of fiber metal laminate sandwich composite structure with polypropylene honeycomb core. Compos Part B 43:1433–1438
Ozdemir I, Muecklich S, Podlesak H, Wielage B (2011) Thixoforming of AA 2017 aluminum alloy composites. J Mater Process Technol 211:1260–1267
Hufenbach W, Langkamp A, Adam F, Krahl M, Hornig A, Zscheyge M, Modler KH (2011) An integral design and manufacturing concept for crash resistant textile and long-fibre reinforced polypropylene structural components. Procedia Eng 10:2086–2091
Author information
Authors and Affiliations
Corresponding author
Editor information
Editors and Affiliations
Rights and permissions
Copyright information
© 2013 Springer-Verlag Berlin Heidelberg
About this paper
Cite this paper
Leuciuc, D., Tabacu, S. (2013). Re-Engineering Functionality by Optimizing Hybrid Parts Design. In: Proceedings of the FISITA 2012 World Automotive Congress. Lecture Notes in Electrical Engineering, vol 199. Springer, Berlin, Heidelberg. https://doi.org/10.1007/978-3-642-33747-5_5
Download citation
DOI: https://doi.org/10.1007/978-3-642-33747-5_5
Published:
Publisher Name: Springer, Berlin, Heidelberg
Print ISBN: 978-3-642-33746-8
Online ISBN: 978-3-642-33747-5
eBook Packages: EngineeringEngineering (R0)