Abstract
High-speed permanent magnet machines are the focus of this thesis; this chapter offers an overview of their current and prospective applications and a theoretical study of their limits.
Keywords
These keywords were added by machine and not by the authors. This process is experimental and the keywords may be updated as the learning algorithm improves.
Access this chapter
Tax calculation will be finalised at checkout
Purchases are for personal use only
Notes
- 1.
A simple indicator of the prevalence of PM machines can be achieved by examining the increase of the relative number of associated academic papers. For illustration, the ratio between number of papers that is associated with PM/PM synchronous/brushless DC and induction/asynchronous motors in the IEEE internet base grew from 0.13 for the period before 1990 to 0.54 after 1990 and to 0.65 after year 2000.
- 2.
Most of the content of this section has been taken from Borisavljevic et al. [49], \(\copyright \) 2010 IEEE.
- 3.
A good part of this section has been taken from Borisavljevic et al. [49], \(\copyright \) 2010 IEEE.
References
Z. Zhu, K. Ng, D. Howe, Design and analysis of high-speed brushless permanent magnet motors, in Electrical Machines and Drive, 1997 Eighth International Conference on (Conf. Publ. No. 444), pp. 381–385, 1–3 Sept 1997
K. Binns, D. Shimmin, Relationship between rated torque and size of permanent magnet machines. IEE Proc. Electr. Power Appl. 143(6), 417–422 (1996)
S. Trout, Rare earth magnet industry in the USA: current status and future trends, in 17th International Workshop on Rare Earth Magnets and Their Applications, University of Delaware, 2002
T. Shimoda, A prospective observation of bonded rare-earth magnets. IEEE Trans. J. Magn. Jpn. 8(10), 701–710 (1993)
P. Campbell, Magnet price performance, in Magnetic Business and Technology, 2007
W. Rodewald, M. Katter, Properties and applications of high performance magnets, in 18th International Workshop on High Performance Magnets and Their Applications, pp. 52–63, 2004
W. Pan, W. Li, L.Y. Cui, X.M. Li, Z.H. Guo, Rare earth magnets resisting eddy currents. IEEE Trans. Magn. 35(5, Part 2), 3343–3345 (1999)
A. Binder, T. Schneider, High-speed inverter-fed ac drives, in Electrical Machines and Power Electronics, 2007. ACEMP ’07. International Aegean Conference on, pp. 9–16, 10–12 Sept 2007
J.F. Gieras, High speed machines, in Advancements in Electric Machines (Power Systems), ed. by J.F. Gieras (Springer, Berlin 2008)
E.A. Setiawan, Dynamics behavior of a 30 kW capstone microturbine, in Institut fuer Solare Energieversorgungstechnik eV (ISET), Kassel, Germany, 2007
K. Isomura, M. Murayama, H. Yamaguchi, N. Ijichi, N. Saji, O. Shiga, K. Takahashi, S. Tanaka, T. Genda, M. Esashi, Development of micro-turbo charger and micro-combustor as feasibility studies of three-dimensional gas turbine at micro-scale. ASME Conf. Proc. 2003, 685–690 (2003)
J. Peirs, D. Reynaerts, F. Verplaetsen, Development of an axial microturbine for a portable gas turbine generator. J. Micromech. Microeng. 13, S190–S195 (2003)
C. Zwyssig, S.D. Round, J.W. Kolar, An ultra-high-speed, low power electrical drive system. IEEE Trans. Ind. Electron. 55(2), 577–585 (2008)
R. Lasseter, P. Paigi, Microgrid: a conceptual solution, in Power Electronics Specialists Conference, 2004. PESC 04. 2004 IEEE 35th Annual, vol. 6, pp. 4285–4290, 20–25 June 2004
P.A. Pilavachi, Mini-and micro-gas turbines for combined heat and power. Appl. Therm. Eng. 22(18), 2003–2014 (2002)
MTT Recuperated Micro Gas Turbine for Micro CHP Systems, Micro Turbine Technology BV, http://www.mtt-eu.com/
C. Zwyssig, J.W. Kolar, S.D. Round, Megaspeed drive systems: pushing beyond 1 million r/163 min. IEEE/ASME Trans. Mechatron. 14(5), 598–605 (2009)
G.J. Atkinson, High Power Fault Tolerant Motors for Aerospace Applications. Ph.D. Dissertation, University of Newcastle upon Tyne, 2007
S. Jang, S. Jeong, D. Ryu, S. Choi, Comparison of three types of pm brushless machines for an electro-mechanical battery. IEEE Trans. Magn. 36(5), 3540–3543 (2000)
A. Nagorny, N. Dravid, R. Jansen, B. Kenny, Design aspects of a high speed permanent magnet synchronous motor/generator for flywheel applications, in Electric Machines and Drives, 2005 IEEE International Conference on, pp. 635–641, 15 May 2005
A.S. Nagorny, R.H. Jansen, D.M. Kankam, Experimental performance evaluation of a high-speed permanent magnet synchronous motor and drive for a flywheel application at different frequencies, in Proceedings of 17th International Conference on Electrical Machines—ICEM, 2006
M. Rahman, A. Chiba, T. Fukao, Super high speed electrical machines—summary, in Power Engineering Society General Meeting, 2004. IEEE, vol. 2, pp. 1272–1275, 10 June 2004
A. Maeda, H. Tomita, O. Miyashita, Power and speed limitations in high speed electrical machines, in Proceedings of IPEC, Yokohama, Japan, pp. 1321–1326, 1995
J. Oliver, M. Samotyj, R. Ferrier, Application of high-speed, high horsepower, ASD controlled induction motors to gas pipelines, in 5th European Conference on Power Electronics and Applications, EPE ’93, pp. 430–434, 1993
High Speed, Calnetix Inc., http://www.calnetix.com/highspeed.cfm
Danfoss Turbocor Compressors, Danfoss Turbocor, http://www.turbocor.com/
Ultra-High Speed Motors & Generators, SatCon Applied Technology, http://www.satcon.com/apptech/mm/uhs.php
Permanent Magnet Rotor with CFRP Rotor Sleeve, e+a Elektromaschinen und Antriebe AG, http://www.eunda.ch/
M. Caprio, V. Lelos, J. Herbst, J. Upshaw, Advanced induction motor endring design features for high speed applications, in Electric Machines and Drives, 2005 IEEE International Conference on, pp. 993–998, 15 May 2005
P. Beer, J.E. Tessaro, B. Eckels, P. Gaberson, High-speed motor design for gas compressor applications, in Proceeding of 35th Turbomachinery Symposium, pp. 103–112, 2006
M. Harris, A. Jones, E. Alexander, Miniature turbojet development at hamilton sundstrand the TJ-50, TJ-120 and TJ-30 turbojets, in 2nd AIAA “Unmanned Unlimited” Systems, Technologies, and Operations Aerospace, Land, and Sea Conference and Workshop & Exhibit, pp. 15–18, 2003
The Smallest Drive System in the World, Faulhaber Group (2004), http://www.faulhaber.com/n223666/n.html
ATE Micro Drives, ATE Systems, http://www.ate-system.de/en/products/ate-micro-drives.html
U. Schroder, Development and application of high speed synchronous machines on active magnetic bearings, in Proceedings of MAG’97, Industrial Conference and Exhibition on Magnetic Bearings, Alexandria, Virginia, p. 79, August 1997
M. Ahrens, U. Bikle, R. Gottkehaskamp, H. Prenner, Electrical design of high-speed induction motors of up to 15 mW and 20000 rpm, in Power Electronics, Machines and Drives, 2002. International Conference on (Conf. Publ. No. 487), pp. 381–386, 4–7 May 2002
M. Larsson, M. Johansson, L. Naslund, J. Hylander, Design and evaluation of high-speed induction machine, in Electric Machines and Drives Conference, 2003. IEMDC’03. IEEE, International, vol. 1, pp. 77–82, 1–4 Sept 2003
B.-H. Bae, S.-K. Sul, J.-H. Kwon, J.-S. Shin, Implementation of sensorless vector control for super-high speed pmsm of turbo-compressor, in Industry Applications Conference, 2001. Thirty-Sixth IAS Annual Meeting. Conference Record of the 2001 IEEE, vol. 2, pp. 1203–1209, 30 Sept 2001
M. Aoulkadi, A. Binder, G. Joksimovic, Additional losses in high-speed induction machine—removed rotor test, in Power Electronics and Applications, 2005 European Conference on, pp. 10 pp.–P.10, 0–0 2005
H.-W. Cho, S.-M. Jang, S.-K. Choi, A design approach to reduce rotor losses in high-speed permanent magnet machine for turbo-compressor. IEEE Trans. Magn. 42(10), 3521–3523 (2006)
I. Takahashi, T. Koganezawa, G. Su, K. Ohyama, A super high speed pm motor drive system by a quasi-current sourceinverter. IEEE Trans. Ind. Appl. 30(3), 683–690 (1994)
PCB Spindles, Westwind Air Bearings, http://www.westwind-airbearings.com/pcb/index.html
J. Oyama, T. Higuchi, T. Abe, K. Shigematsu, R. Moriguchi, The development of small size ultra-high speed drive system, in Power Conversion Conference—Nagoya, 2007. PCC ’07, pp. 1571–1576, 2–5 Dec 2007
Oil-Free, Motorized Compressor Systems, Mohawk Innovative Technology, http://www.miti.cc/
J. Bumby, E. Spooner, J. Carter, H. Tennant, G. Mego, G. Dellora, W. Gstrein, H. Sutter, J. Wagner, Electrical machines for use in electrically assisted turbochargers, in Power Electronics, Machines and Drives, 2004. (PEMD 2004). Second International Conference on (Conf. Publ. No. 498), vol. 1, pp. 344–349, 31 March 2004
BorgWarner Turbo & Emission Systems, http://www.turbos.bwauto.com
C. Zwyssig, M. Duerr, D. Hassler, J.W. Kolar, An ultra-high-speed, 500000 rpm, 1 kW electrical drive system, in Proceedings of Power Conversion Conference—PCC’07, pp. 1577–1583, 2007
A. Binder, T. Schneider, M. Klohr, Fixation of buried and surface-mounted magnets in high-speed permanent-magnet synchronous machines. IEEE Trans. Ind. Appl. 42(4), 1031–1037 (2006)
O. Aglen, A. Andersson, Thermal analysis of a high-speed generator, Industry Applications Conference, 2003. 38th IAS Annual Meeting. Conference Record of the, vol. 1, pp. 547–554, 12–16 Oct 2003
A. Borisavljevic, H. Polinder, J. Ferreira, On the speed limits of permanent-magnet machines. IEEE Trans. Ind. Electron. 57(1), 220–227 (2010)
N. Bianchi, S. Bolognani, F. Luise, Potentials and limits of high-speed pm motors. IEEE Trans. Ind. Appl. 40(6), 1570–1578 (2004)
G. Slemon, On the design of high-performance surface-mounted pm motors. IEEE Trans. Ind. Appl. 30(1), 134–140 (1994)
N. Bianchi, S. Bolognani, F. Luise, High speed drive using a slotless pm motor. IEEE Trans. Power Electron. 21(4), 1083–1090 (2006)
R. Larsonneur, Design and Control of Active Magnetic Bearing Systems for High Speed Rotation. Ph.D. Dissertation, Swiss Federal Institute of Technology Zurich, 1990
C. Zwyssig, J.W. Kolar, Design considerations and experimental results of a 100 W, 500,000 rpm electrical generator. J. Micromech. Microeng. 16(9), 297–307 (2006)
T. Wang, F. Wang, H. Bai, J. Xing, Optimization design of rotor structure for high speed permanent magnet machines, in Electrical Machines and Systems, ICEMS. International Conference on, pp. 1438–1442, 8–11 Oct 2007
T. Iwatsubo, Stability problems of rotor systems. Shock Vib. Inform. Digest (Shock and Vibration Information Center) 12(7), 22–24 (1980)
J. Melanson, J.W. Zu, Free vibration and stability analysis of internally damped rotating shafts with general boundary conditions. J. Vib. Acoust. 120, 776 (1998)
W. Kim, A. Argento, R. Scott, Forced vibration and dynamic stability of a rotating tapered composite timoshenko shaft: Bending motions in end-milling operations. J. Sound Vib. 246(4), 583–600 (2001)
G. Genta, Dynamics of Rotating Systems (Springer, Berlin, 2005)
V. Kluyskens, B. Dehez, H. Ahmed, Dynamical electromechanical model for magnetic bearings. IEEE Trans. Magn. 43(7), 3287–3292 (2007)
A. Grauers, P. Kasinathan, Force density limits in low-speed pm machines due to temperature and reactance. IEEE Trans. Energy Convers. 19(3), 518–525 (2004)
J. Ferreira, Improved analytical modeling of conductive losses in magnetic components. IEEE Trans. Power Electron. 9(1), 127–131 (1994)
E. Spooner, B. Chalmers, ‘TORUS’: a slotless, toroidal-stator, permanent-magnet generator. IEE Proc. B. Electr. Power Appl. 139(6), 497–506 (1992)
J. Saari, Thermal Analysis of High-Speed Induction Machines. Ph.D. Dissertation, Acta Polytechnica Scandinavica, 1998
Author information
Authors and Affiliations
Corresponding author
Rights and permissions
Copyright information
© 2013 Springer-Verlag Berlin Heidelberg
About this chapter
Cite this chapter
Borisavljevic, A. (2013). High-Speed PM Machines: Applications, Trends and Limits. In: Limits, Modeling and Design of High-Speed Permanent Magnet Machines. Springer Theses. Springer, Berlin, Heidelberg. https://doi.org/10.1007/978-3-642-33457-3_2
Download citation
DOI: https://doi.org/10.1007/978-3-642-33457-3_2
Published:
Publisher Name: Springer, Berlin, Heidelberg
Print ISBN: 978-3-642-33456-6
Online ISBN: 978-3-642-33457-3
eBook Packages: EngineeringEngineering (R0)