Abstract
Three-dimensional (3D) in vitro living organs that can mimic organ and tissue structure and function have great impact on developing advanced biological science and technology from basic biology to drug discovery, and will have great impact on the future of science to use human organs and tissues not only as new therapeutic approaches but also as intelligent biological tools for many applications such as early detection of newly formed diseases, next generation of diagnostic tools, and an alternative energy source called “bio-energy” devices. Many 3D technology have been already developed, but most of these technologies require expensive equipment, large sample volumes, long time process and fabrication, and the most disadvantages of them is that they are too far from the nature of human organs. Because of the above problems, research and development on drug discovery, regenerative medicine, biotech and pharmaceutical industries are very costly and takes several years to bring a single drug/product to the marketing. The goal of 3D technology is to merge biomaterials science, nanotechnology, and biological principles to generate 3D in vitro living organs, to be called human on chip to mimic organs/tissues in order to partially reduce the amount of in vitro and in vivo animal testing, clinical trials, and to solve the above problems. In a single word; its goal is to jump from bench to market in a low cost and short time. At the nanoscale, chemistry and materials are used to fabricate novel type of hydrogels that are similar to human organs, infusing the cell with extracellular matrix (ECM) molecules and gradients of signaling molecules to influence cell development and aggregation. At microscales, fabrication technology such as photolithography is used to produce devices in a variety of shapes and sizes. These products will have to mimic natural organ and tissues from view point of physical, chemical, and biological properties to in order to be used as intelligent tools.
Access this chapter
Tax calculation will be finalised at checkout
Purchases are for personal use only
References
Hosseinkhani, H., Inatsugu, Y., Inoue, S., Hiraoka, Y., Tabata, Y.: Perfusion culture enhances the osteogenic differentiation of rat mesenchymal stem cells in collagen sponge rein forced with poly (glycolic acid) fiber. Tissue Eng. 11, 1476–1488 (2005)
Tian, F., Hosseinkhani, H., Hosseinkhani, M., Khademhosseini, A., Yokoyama, Y., Esterada, G.G., et al.: Quantitative analysis of cell adhesion on aligned micro- and nanofibers. J. Biomed. Mater. Res. Part A 84, 291–299 (2008)
Xie, Y., Yang, S.T., Kniss, D.A.: Three-dimensional cell-scaffold constructs promote efficient gene transfection: implications for cell-based gene therapy. Tissue Eng. 7, 585–598 (2001)
Hosseinkhani, H., Azzam, T., Kobayashi, H., Hiraoka, Y., Shimokawa, H., Domb, A.J., et al.: Combination of 3D tissue engineered scaffold and non-viral gene enhance in vitro DNA expression of mesenchymal stem cells. Biomater. 27, 4269–4278 (2006)
Hosseinkhani, H., Yamamoto, M., Inatsugu, Y., Hiraoka, Y., Inoue, S., Shimokawa, H., et al.: Enhanced ectopic bone formation using a combination of plasmid DNA impregnation into 3D scaffold and bioreactor perfusion culture. Biomater. 27, 1387–1398 (2006)
Hutmatcher, D.W.: Scaffolds in tissue engineering bone and cartilage. Biomater. 21, 2529–2543 (2000)
Hosseinkhani, H., Hosseinkhani, M., Khademhosseini, A., Gabrielson, N.P., Pack, D.W., Kobayashi, H.: DNA nanoparticles encapsulated in 3D tissue engineered scaffold enhance osteogenic differentiation of mesenchymal stem cells. J. Biomed. Mater. Res. Part A 85, 47–60 (2008)
Hosseinkhani, H., Hosseinkhani, M., Tian, F., Kobayashi, H., Tabata, Y.: Bone regeneration on a collagen sponge-self assembled peptide-amphiphile nanofibers hybrid scaffold. Tissue Eng. 13, 1–9 (2007)
Mueller-Klieser, W.: Three-dimensional cell cultures: from molecular mechanisms to clinical applications. Am. J. Physiol. 273, C1109–C1113 (1997)
Cai, Z., Cheng, G.: Novel method to produce poly(3-hydroxybutyrate) scaffolds with controlled multi-pore size. J. Mater. Sci. Lett. 22, 153–155 (2003)
Zhang, X., Jiang, X.N., Sun, C.: Micro-stereolithography of polymeric and ceramic microstructures. Sens. Actuators 77, 149–156 (1997)
Kane, R.S., Takayama, S., Ostuni, E., Ingber, D.E., Whitesides, G.M.: Patterning proteins and cells using soft lithography. Biomater. 20, 2363–2376 (1999)
Mikos, A.G., Sakarinos, G.J., Vacanti, P., Langer, R.S., Cima, L.G.: Biocompatible polymer membranes and methods of preparation of three dimensional membrane structures. US Patent number 5,514,378, (1996)
Hosseinkhani, H., Hosseinkhani, M., Khademhosseini, A., Kobayashi, H., Tabata, Y.: Enhanced angiogenesis through controlled release of basic fibroblast growth factor from peptide amphiphile for tissue regeneration. Biomater. 27, 5836–5844 (2006)
Hosseinkhani, H., Hosseinkhani, M., Khademhosseini, A., Kobayashi, H.: Bone regeneration through controlled release of bone morphogenetic protein-2 from 3-D tissue engineered nano-scaffold. J. Contr. Release 117, 380–386 (2007)
Mohageri, S., Hosseinkhani, H., Ebrahimi, N.G., Solimani, M., Kajbafzadeh, A.M.: Proliferation and differentiation of mesenchymal stem cell on collagen sponge reinforced with polypropylene/polyethylene terephathalate blend fibers. Tissue Eng. Part A 16, 3821–3830 (2010)
Hosseinkhani, H., Hosseinkhani, M., Hattori, S., Matsuoka, R., Kawaguchi, N.: Micro and nanoscale in vitro 3D culture system for cardiac stem cells. J. Biomed. Mater. Res. Part A 94, 1–8 (2010)
Schmidt, C.E., Leach, J.B.: Neural tissue engineering: strategies for repair and regeneration. Ann. Rev. Biomed. Eng. 5, 293–347 (2003)
Hosseinkhani, H., Hosseinkhani, M., Tian, F., Kobayashi, H., Tabata, Y.: Osteogenic differentiation of mesenchymal stem cells in self assembled-peptide amphiphile nanofibers. Biomater. 27, 4079–4086 (2006)
Hosseinkhani, H., Hosseinkhani, M., Kobayashi, H.: Design of tissue engineered nanoscaffold through self assembly of peptide amphiphile. J. Bioact. Compat. Pol. 21, 277–296 (2006)
Hosseinkhani, H., Hosseinkhani, M., Khademhosseini, A.: Emerging applications of hydrogels and microscale technologies in drug discovery. Drug Discov. 1, 32–34 (2006)
Hosseinkhani, H., Hosseinkhani, M., Kobayashi, H.: Proliferation and differentiation of mesenchymal stem cells by using self assembly of peptide-amphiphile nanofibers. Biomed. Mater. 1, 8–15 (2006)
Maquet, V., Martin, D., Scholtes, F., Franzen, R., Schoenen, J., Moonen, G., Jérôme, R.: Poly(D, L-lactide) foams modified by poly(ethylene oxide)-block-poly(D, L-lactide) copolymers and a-FGF: in vitro and in vivo evaluation for spinal cord regeneration. Biomater. 22, 1137–1146 (2001)
Author information
Authors and Affiliations
Corresponding author
Editor information
Editors and Affiliations
Rights and permissions
Copyright information
© 2013 Springer-Verlag Berlin Heidelberg
About this chapter
Cite this chapter
Hosseinkhani, H. (2013). Innovation Technology to Engineer 3D Living Organs as Intelligent Diagnostic Tools. In: Öchsner, A., da Silva, L., Altenbach, H. (eds) Characterization and Development of Biosystems and Biomaterials. Advanced Structured Materials, vol 29. Springer, Berlin, Heidelberg. https://doi.org/10.1007/978-3-642-31470-4_13
Download citation
DOI: https://doi.org/10.1007/978-3-642-31470-4_13
Published:
Publisher Name: Springer, Berlin, Heidelberg
Print ISBN: 978-3-642-31469-8
Online ISBN: 978-3-642-31470-4
eBook Packages: Chemistry and Materials ScienceChemistry and Material Science (R0)