Abstract
Transparency of a haptic interface can be improved by minimizing the effects of inertia and friction through the use of model based compensators. However, the performance with these algorithms is limited due to the estimation errors in the system model and in the velocity and acceleration from quantized encoder data. This paper contributes a new torque compensator based on motor current to improve transparency. The proposed method was tested experimentally in time and frequency domains by means of an excitation motor attached at the user side of the device. The excitation motor enabled evaluation of the algorithms with smooth trajectories and high frequencies, which cannot be generated by user hand. Experimental results showed that the algorithm significantly improves transparency and doubles the transparency bandwidth.
Keywords
Access this chapter
Tax calculation will be finalised at checkout
Purchases are for personal use only
Preview
Unable to display preview. Download preview PDF.
References
Lawrence, D.A.: Stability and transparency in bilateral teleoperation. IEEE Transactions on Robotics and Automation 9(3), 624–637 (1993)
McJunkin, S.T.: Transparency Improvement for Haptic Interfaces. PhD. Thesis (May 2007)
Vlachos, K., Papadopoulos, E.: Transparency maximization methodology for haptic devices. IEEE/ASME Transactions on Mechatronics 11(3), 249–255 (2006)
Colgate, J.E.: Robust impedance shaping telemanipulation. IEEE Transactions on Robotics and Automation 9(4), 374–384 (1993)
Fite, K.B., Speich, J.E., Goldfarb, M.: Transparency and Stability Robustness in Two-Channel Bilateral Teleoperation. Journal of Dynamic Systems, Measurement, and Control 123, 400–407 (2001)
Lee, H.K., Chung, M.J.: Adaptive Controller of a Master-Slave System for Transparent Teleoperation. Journal of Robotic Systems 15(8), 465–475 (1998)
Hashtrudi-Zaad, K., Salcudean, S.E.: Analysis of Control Architectures for Teleoperation Systems with Impedance/Admittance Master and Slave Manipulators. The International Journal of Robotic Research 20(6), 419–445 (2001)
Carignan, C.R., Cleary, K.R.: Closed-Loop Force Control for Haptic Simulation of Virtual Environments. The Electronic Journal of Haptics Research 1(2), 1–14 (2000)
Frisoli, A., Sotgiu, E., Avizzano, C.A., Checcacci, D., Bergamasco, M.: Force-based Impedance Control of a Haptic Master System for Teleoperation. Sensor Review 24(1), 42–50 (2004)
Bernstein, N.L., Lawrence, D.A., Pao, L.Y.: Friction Modeling and Compensation for Haptic Interfaces. In: Proceedings of the First Joint Eurohaptics Conference and Symposium on Haptic Interfaces for Virtual Environment and Teleoperator Systems, pp. 290–295 (2005)
McJunkin, S.T., O’Malley, M.K., Speich, J.E.: Transparency of a Phantom Premium Haptic Interface for Active and Passive Human Interaction. In: American Control Conference, pp. 3060–3065 (2005)
McJunkin, S.T., Li, Y., O’Malley, M.K.: Human-Machine Admittance and Transparency Adaptation in Passive User Interaction with a Haptic Interface. In: Proceedings of the First Joint Eurohaptics Conference and Symposium on Haptic Interfaces for Virtual Environment and Teleoperator Systems, pp. 283–289 (2005)
Gil, J.J., Sanchez, E.: Control Algorithms for Haptic Interaction and Modifying the Dynamical Behavior of the Interface. In: 2nd International Conference on Enactive Interfaces (2005)
Bernstein, N.L., Lawrence, D.A., Pao, L.Y.: Friction Modeling and Compensation for Haptic Interfaces. In: Proceedings of the First Joint Eurohaptics Conference and Symposium on Haptic Interfaces for Virtual Environment and Teleoperator Systems, pp. 290–295 (2005)
Hollerbach, J., Khalil, W., Gautier, M.: Model Identification. In: Siciliano, B., Khatib, O. (eds.) Springer Handbook of Robotics, pp. 321–344. Springer (2008)
Liu, G.: On velocity estimation using position measurements. In: American Control Conference, vol. 2, pp. 1115–1120 (2002)
Chan, S.P.: Velocity estimation for robot manipulators using neural network. Journal of Intelligent and Robotic Systems 23, 147–163 (1998)
Yusivar, F., Hamada, D., Uchida, K., Wakao, S., et al.: A new method of motor speed estimation using fuzzy logic algorithm. In: International Conference of Electric Machine Drives, pp. 278–280 (1999)
Janabi-Sharifi, F., Hayward, V., Chen, C.-S.J.: Discrete-Time Adaptive Windowing for Velocity Estimation. IEEE Transaction on Control System Technology 8(6) (2000)
Kilic, E., Baser, O., Dolen, M., Konukseven, E.I.: Enhanced adaptive windowing technique for velocity and acceleration estimation using incremental position encoders. In: IEEE International Conference on Signal and Electronic Systems, Gliwice, Poland (2010)
Baser, O., Kilic, E., Konukseven, E.I., Dolen, M.: A hybrid technique to estimate velocity and acceleration using low-resolution optical incremental encoders. In: IEEE International Conference on Signal and Electronic Systems, Gliwice, Poland (2010)
Fite, K., Speich, J., Goldfarb, M.: Loop Shaping for Transparency and Stability Robustness in Bilateral Telemanipulation. IEEE Trans. Rob. Autom. 20(3), 620–624 (2004)
Gupta, A., O’Malley, M.K.: Disturbance-Observer-Based Force Estimation for Haptic Feedback. Journal of Dynamic Systems, Measurement, and Control 133(1), 014505 (4 pages) (2011)
Author information
Authors and Affiliations
Editor information
Editors and Affiliations
Rights and permissions
Copyright information
© 2012 Springer-Verlag Berlin Heidelberg
About this paper
Cite this paper
Baser, O., Konukseven, E.I., Gurocak, H. (2012). Transparency Improvement in Haptic Devices with a Torque Compensator Using Motor Current. In: Isokoski, P., Springare, J. (eds) Haptics: Perception, Devices, Mobility, and Communication. EuroHaptics 2012. Lecture Notes in Computer Science, vol 7282. Springer, Berlin, Heidelberg. https://doi.org/10.1007/978-3-642-31401-8_4
Download citation
DOI: https://doi.org/10.1007/978-3-642-31401-8_4
Publisher Name: Springer, Berlin, Heidelberg
Print ISBN: 978-3-642-31400-1
Online ISBN: 978-3-642-31401-8
eBook Packages: Computer ScienceComputer Science (R0)