Abstract
This chapter presents an approach to cyber security assessment, which is based on Gap Analysis (GA) and Intrusion Modes and Effects Criticality Analysis (IMECA) techniques, applicable to complex Instrumentation and Control (I&C) systems, including safety-critical FPGA-based I&C systems. Elements of the GA-and-IMECA procedure of assessment are proposed. As an example, the proposed approach and technique are considered in the context of assessing the cyber security properties of FPGA-based I&C systems, taking into account vulnerabilities of products and discrepancies of appropriate processes.
Access this chapter
Tax calculation will be finalised at checkout
Purchases are for personal use only
Preview
Unable to display preview. Download preview PDF.
References
IEC 61508:2010, Functional Safety of Electrical/Electronic/Programmable Electronic Safety-related Systems (2010)
NUREG/CR-7006, Review Guidelines for Field-Programmable Gate Arrays in Nuclear Power Plant Safety Systems, U.S. Nuclear Regulatory Commission (February 2010)
Kharchenko, V., Sklyar, V. (eds.): FPGA-based NPP Instrumentation and Control Systems: Development and Safety Assessment, Research and Production Corporation “Radiy”, National Aerospace University named after N.E. Zhukovsky “KhAI”, State Scientific Technical Center on Nuclear and Radiation Safety, 188 p (2008)
Kharchenko, V. (ed.): Critical Infrastructures Safety: Mathematical and Engineering Methods of Analysis and Assurance, Department of Education and Science of Ukraine, National aerospace university named after N. Zhukovsky “KhAI”, 641 p (2011)
Ravi, S., Raghunathan, A., Kocher, P.: Security in Embedded Systems: Design Challenges. ACM Transactions on Embedded Computing Systems 3(3), 461–491 (2004)
Grand, J.: Practical Secure Hardware Design for Embedded Systems. In: Proc. of the 2004 Embedded Systems Conference, San Francisco, California, March 29-April 1 (2004)
IEC 812, Analysis Techniques for System Reliability – Procedure for Failure Modes and Effects Analysis (FMEA). International Electrotechnical Commission, Geneva (1985)
Lutz, R., Helmer, G., Moseman, M., Statezni, D., Tockey, S.: Safety Analysis of Requirements for a Product Family. In: Proc. 3rd Int’l Conf. on Requirements Engineering (ICRE 1998), pp. 24–31 (1998)
Elyasi Komari, I., Kharchenko, V., Babeshko, E., Gorbenko, A., Siora, A.: Extended Dependability Analysis of Information and Control Systems by FME(C)A-technique: Models. In: Procedures, Application, DepCoS – RELCOMEX 2009, pp. 25–32 (2009)
Gorbenko, A., Kharchenko, V., Tarasyuk, O., Furmanov, A.: F(I)MEA-Technique of Web Services Analysis and Dependability Ensuring. In: Butler, M., Jones, C.B., Romanovsky, A., Troubitsyna, E. (eds.) Rigorous Development of Complex Fault-Tolerant Systems. LNCS, vol. 4157, pp. 153–167. Springer, Heidelberg (2006)
Avizienis, A., Laprie, J.-C., Randell, B., Landwehr, C.: Basic Concepts and Taxonomy of De-pendable and Secure Computing. IEEE Transactions on Dependable and Secure Computing 1(1), 11–33 (2004)
Babeshko, E., Kharchenko, V., Gorbenko, A.: Applying F(I)MEA-technique for SCADA-based Industrial Control Systems Dependability Assessment and Ensuring. In: DepCoS-RELCOMEX 2008, pp. 309–315 (2008), doi:10.1109/DepCoS-RELCOMEX.2008.23
Abrial, J.-R.: Modeling in Event-B, 612 p. Cambridge University Press (2010)
Author information
Authors and Affiliations
Corresponding author
Editor information
Editors and Affiliations
Rights and permissions
Copyright information
© 2013 Springer-Verlag Berlin Heidelberg
About this paper
Cite this paper
Kharchenko, V., Andrashov, A., Sklyar, V., Kovalenko, A., Siora, O. (2013). Gap-and-IMECA-Based Assessment of I&C Systems Cyber Security. In: Zamojski, W., Mazurkiewicz, J., Sugier, J., Walkowiak, T., Kacprzyk, J. (eds) Complex Systems and Dependability. Advances in Intelligent and Soft Computing, vol 170. Springer, Berlin, Heidelberg. https://doi.org/10.1007/978-3-642-30662-4_10
Download citation
DOI: https://doi.org/10.1007/978-3-642-30662-4_10
Publisher Name: Springer, Berlin, Heidelberg
Print ISBN: 978-3-642-30661-7
Online ISBN: 978-3-642-30662-4
eBook Packages: EngineeringEngineering (R0)