Abstract
Polymeric materials are generally reinforced with inorganic fillers in order to reduce cost or to enhance mechanical, thermal, rheological and barrier properties. The fillers used have different geometrical dimensions and thus affect the polymer properties differently. For example, silica (and calcium carbonate) particles are generally spherical (aspect ratio near to 1) and enhance the strength of the polymeric materials. On the other hand, clay and graphene particles are platy in nature and enhance the mechanical, barrier and electrical properties of the polymers. Fibers or nanotubes have the highest aspect ratio and enhance the longitudinal strength as well as electrical properties of the polymer materials. Most common factor affecting the filler performance is the dispersion and distribution of the filler particles in the polymer matrix. Good dispersion and distribution of the filler particles is mandatory to achieve efficient interface between the organic inorganic components. Various microscopy techniques constitute most powerful methods to characterize the morphology of the organic–inorganic materials as described by the diverse examples presented in the following sections. The characterization of nanocomposites also poses additional challenges owing to the large number of nano-sized particles. The microscopic characterization also acts as a quality control tool as the poorly dispersed systems can be improved by changing the process parameters. Apart from characterization of the distribution and dispersion of filler particles, microscopy techniques also provide information on the alignment of the platy and fibrous particles.
Access this chapter
Tax calculation will be finalised at checkout
Purchases are for personal use only
References
Tissot, I., Novat, C., Lefebvre, F., Bourgeat-Lami, E.: Macromolecules 34, 5737 (2001)
Matsko, N.B. In: Mittal, V. (ed.) Advances in Polymer Nanocomposites Technology, p. 407. Nova Science Publishers, New York (2010)
Mittal, V.: J. Thermoplast. Compos. Mater. 20, 575–599 (2007)
Osman, M.A., Mittal, V., Morbidelli, M., Suter, U.W.: Macromolecules 36, 9851–9858 (2003)
Mittal, V. In: Mittal, V. (ed.) Optimization of Polymer Nanocomposite Properties, p. 1. Wiley VCH Verlag, Weinheim (2010)
Kim, H., Miura, Y., Macosko, C.W.: Chem. Mater. 22, 3441–3450 (2010)
Potts, J.R., Dreyer, D.R., Bielawski, C.W., Ruoff, R.S.: Polymer 52, 5–25 (2011)
Steurer, P., Wissert, R., Thomann, R., Mulhaupt, R.: Macromol. Rapid Comm 30, 316–27 (2009)
Eitan, A., Fisher, F.T., Andrews, R., Brinson, L.C., Schadler, L.S.: Compos. Sci. Technol. 66, 1162–1173 (2006)
Lin, Y., Zhou, B., Fernando, K.A.S., Liu, P., Allard, L.F., Sun, Y.-P.: Macromolecules 36, 7199–7204 (2003)
Velasco-Santos, C., Martinez-Hernandez, A.L., Fisher, F.T., Ruoff, R., Castano, V.M.: Chem. Mater. 15, 4470–4475 (2003)
Kumar, N.A., Bund, A., Cho, B.G., Lim, K.T., Jeong, Y.T.: Nanotechnology 20, 225608 (2009)
Osman, M.A., Mittal, V., Morbidelli, M., Suter, U.W.: Macromolecules 37, 7250–7257 (2004)
Wang, D., Li, Y., Xie, X.-M., Guo, B.-H.: Polymer 52, 191–200 (2011)
Malheiro, V.N., Caridade, S.G., Alves, N.M., Mano, J.F.: Acta Biomater. 6, 418–428 (2010)
Author information
Authors and Affiliations
Corresponding author
Rights and permissions
Copyright information
© 2012 Springer-Verlag Berlin Heidelberg
About this chapter
Cite this chapter
Mittal, V., Matsko, N.B. (2012). Morphology in Organic–Inorganic Composites. In: Analytical Imaging Techniques for Soft Matter Characterization. Engineering Materials. Springer, Berlin, Heidelberg. https://doi.org/10.1007/978-3-642-30400-2_8
Download citation
DOI: https://doi.org/10.1007/978-3-642-30400-2_8
Published:
Publisher Name: Springer, Berlin, Heidelberg
Print ISBN: 978-3-642-30399-9
Online ISBN: 978-3-642-30400-2
eBook Packages: Chemistry and Materials ScienceChemistry and Material Science (R0)