Abstract
Under certain flow conditions, when an air inlet is aspirated in close proximity to a solid surface, an inlet vortex will form between the inlet and the surface under certain flow conditions. This phenomenon can manifest itself during the operation of aircraft engines either when the aircraft is on the runway prior to take-off or during engine ground run, or when the engine is in a test cell during post maintenance tests. The vortex can pitch debris into the intake causing foreign object damage (F.O.D.) to the engine blades or result in compressor stall. The take-off problem can be partially solved by keeping the runway clear of debris and scheduling the throttle appropriately whenever possible. However throttle scheduling will not be appropriate during engine tests both on the ground and in a test cell. The characteristics of the vortex depends on a number of geometric and flow conditions such as the position of the engine relative to the surface, intake flow capture ratio and upstream flow. To eliminate these vortices at the design stage of aircraft configuration or new test cell, it is essential to be able to predict the onset of the vortex or at least understand the factors affecting their formation. In addition, it is also very important to understand the characteristics of such a vortex to be able to determine the potential damage if complete prevention is not possible.
This paper seeks to provide an understanding of this flow phenomenon by collating and analysing previous investigations and implemented solutions in both aircraft ground operations as well as during engine tests in a jet engine test cell. It will contain information from computational as well as experimental studies with emphasis on computational methods. The paper will present computational and experimental results from various sources with regards to the threshold conditions at which such vortices are formed in addition to their characteristics. To permit interested readers sufficient information to perform similar calculations, it will also contain details of the computational methods and parameters, such as the required computational domain as well as the solution schemes. The computational simulations were performed on commercial computational fluid dynamics (CFD) package Fluent 13.0 which utilises the finite volume method to solve the governing Navier-Stokes equations.
This is a preview of subscription content, log in via an institution to check access.
Access this chapter
Tax calculation will be finalised at checkout
Purchases are for personal use only
Preview
Unable to display preview. Download preview PDF.
References
Barata, J.M.M., Maneta, A.M., Silva, A.: Numerical Study of a Gas Turbine Engine Ground Vortex. In: 45th AIAA/ASME/SAE/ASEE Joint Propulsion Conference & Exhibit, Denver, Colorado (August 2009)
Barata, J.M.M., Manquinho, P., Silva, A.: A Comparison of Different Gas Turbine Engines Ground Vortex Flows. In: 46th AIAA/ASME/SAE/ASEE Joint Propulsion Conference & Exhibit, AIAA, Nashville (July 2010)
Bigelis, C., Colehour, J., Davidson, G., Farqhar, B., Helberg, A.: Vortex preventing apparatus for aircraft jet engines. US Patent 3599429 (1969)
Brix, S., Neuwerth, G., Jacob, D.: The Inlet-Vortex System of Jet Engines Operating Near the Ground. In: 18th AIAA Applied Aerodynamics Conference, pp. 75–85. AIAA, Denver (2000)
Clark, T., P, J.W., Jermy, M., Harris, G., Gilmore, J., Agmen, K.: Suppression of vortex ingestion in the Christchurch Engine Centre V2500 cell Christchurch Engine Centre V2500 test cell (2005)
Clark, T.A., Peszko, M.W., Roberts, J.H., Muller, G.L., Nikkanen, J.P.: Gas turbine engine test cell. US Patent 5293775 (1994)
Colehour, J.L., Farquhar, B.W.: Inlet vortex. Journal of Aircraft 8(1), 39–43 (1971), http://doi.aiaa.org/10.2514/3.44224 , doi:10.2514/3.44224
Funk, R., Parekh, D., Smith, D., Dorris, J.: Inlet vortex alleviation. In: AIAA Applied Aerodynamics Conference. AIAA (June 2001)
Glenny, D.E.: Ingestion of Debris into Intakes by Vortex Action. Aeronautical Research Council Papers 1114 (1970)
Ho, W.H.: Investigation into the Vortex Formation Threshold and Infrasound Generation in a Jet Engine Test Cell. Ph.D. thesis, University of Canterbury (2009)
Ho, W.H., Dumbleton, H., Jermy, M.: Effect of Upstream Velocity Gradient on the Formation of Sink Vortices in a Jet Engine Test. In: Proceedings of the International MultiConference of Engineers and Computer Scientists (IMECS), pp. 1767–1772. IAENG, Hong Kong (2008)
Ho, W.H., Gilmore, J., Jermy, M.: Reduction of engine exhaust noise in a jet engine test cell. Noise Control Engineering Journal 59(2), 194–201 (2011)
Ho, W.H., Jermy, M.: Validated CFD simulations of vortex formation in jet engine test cells. In: 16th Australasian Fluid Mechanics Conference, Gold Coast, pp. 1102–1107 (December 2007)
Ho, W.H., Jermy, M.: Formation And Ingestion Of Vortices Into Jet Engines During Operation. In: IAENG Transactions on Engineering Technologies, Special Editions of the International Multi Conference of Engineers and Computer Scientists 2008, pp. 132–143. Springer (2008)
Ho, W.H., Jermy, M., Dumbleton, H.: Formation of Sink Vortices in a Jet Engine Test Cell. Engineering Letters 16(3), 406–411 (2008)
Jeong, J.H., Hussain, F.: On the identification of a vortex. Journal of Fluid Mechanics 285, 69–94 (1991)
Jermy, M., Ho, W.H.: Location of the vortex formation threshold at suction inlets near ground planes by computational fluid dynamics simulation. Proceedings of the Institution of Mechanical Engineers, Part G: Journal of Aerospace Engineering 222(3), 393–402 (2008), http://pig.sagepub.com/lookup/doi/10.1243/09544100JAERO265 , doi:10.1243/09544100JAERO265
Johns, C.: The aircraft engine inlet vortex problem. In: AIAA’s Aircraft Technology, Integration, and Operations (ATIO) Technical Forum. AIAA (October 2002)
Klein, H.: Small scale tests on jet engine pebble aspiration tests. Report SM-14885, Douglas Aircraft Company (1953)
Liu, W., Greitzer, E.M., Tan, C.S.: Surface Static Pressures in an Inlet Vortex Flow Field. Journal of Engineering for Gas Turbines and Power 107(2), 387 (1985), http://link.aip.org/link/JETPEZ/v107/i2/p387/s1&Agg=doi , doi:10.1115/1.3239738
Motycka, D., Walter, W., Muller, G.: An analytical and experimental study of inlet ground vortices. In: 9th Propulsion Conference. AIAA ( November 1973)
Murphy, J.P.: Intake Ground Vortex Aerodynamics. Ph.D. thesis, Cranfield University (2008)
Murphy, J.P., MacManus, D.G.: Ground vortex aerodynamics under crosswind conditions. Experiments in Fluids 50(1), 109–124 (2010), http://www.springerlink.com/index/10.1007/s00348-010-0902-4 , doi:10.1007/s00348-010-0902-4
Murphy, J.P., MacManus, D.G.: Inlet ground vortex aerodynamics under headwind conditions. Aerospace Science and Technology 15(3), 207–215 (2011), http://linkinghub.elsevier.com/retrieve/pii/S1270963810001604 , doi:10.1016/j.ast.2010.12.005
Murphy, J.P., MacManus, D.G.: Intake Ground Vortex Prediction Methods. Journal of Aircraft 48(1), 23–33 (2011), http://doi.aiaa.org/10.2514/1.46221 , doi:10.2514/1.46221
Nakayama, A., Jones, J.R.: Vortex Formation in Inlet Flow Near a Wall. In: 34th Aerospace Sciences Meeting & Exhibit (1996)
Ridder, S.O., Samuelsson, I.: An experimental study of strength and existence domain of groun-to-air inlet vortices by ground board static pressure measurements. Tech. rep., The Royal Institute of Technology Stockholm KTH AERO TN62 (1982)
Ruehr, W.: Technical Information Series Report R75AEG384, General Electric (1975)
Secareanu, A., Moroianu, D.: Experimental and Numerical Study of Ground Vortex Interaction in an Air-Intake. In: 43rd AIAA Aerospace Sciences Meeting and Exhibit, Reno, Nevada (January 2005)
Shin, H.W., Greitzer, E.M., Cheng, W.K., Tan, C.S., Shippee, C.L.: Circulation measurements and vortical structure in an inlet-vortex flow field. Journal of Fluid Mechanics 162, 463–487 (1986)
Shmilovich, A., Yadlin, Y.: Engine Ground Vortex Control. In: 24th Applied Aerodynamics Conference, Francisco, California (June 2006)
Shmilovich, A., Yadlin, Y., Smith, D., Clark, R.: Active system forwide area suppression of engine vortex. US Patent 6763651 (2002)
Siervi, F.D., Viguier, H.C., Greitzer, E.M., Tan, C.S.: Mechanisms of inlet-vortex formation. Journal of Fluid Mechanics 124, 173–207 (1982)
Smith, J.: Protective air curtain for aircraft engine inlet. US Patent 3527430 (1970)
Trapp, L.G., Girardi, R.D.M.: Crosswind Effects on Engine Inlets: The Inlet Vortex. Journal of Aircraft 47(2), 577–590 (2010), http://doi.aiaa.org/10.2514/1.45743 , doi:10.2514/1.45743
Yadlin, Y., Shmilovich, A.: Simulation of Vortex Flows for Airplanes in Ground Operations. In: 44th AIAA Aerospace Sciences Meeting and Exhibit. AIAA, Reno (2006)
Zantopp, S., Macmanus, D.G., Murphy, J.P.: Computational and experimental study of intake ground vortices. The Aeronautical Journal 114(1162), 769–784 (2010)
Author information
Authors and Affiliations
Corresponding author
Editor information
Editors and Affiliations
Rights and permissions
Copyright information
© 2012 Springer Berlin Heidelberg
About this chapter
Cite this chapter
Ho, W.H. (2012). A Consolidated Study Regarding the Formation of the Aero-Inlet Vortex. In: Byrski, A., Oplatková, Z., Carvalho, M., Kisiel-Dorohinicki, M. (eds) Advances in Intelligent Modelling and Simulation. Studies in Computational Intelligence, vol 416. Springer, Berlin, Heidelberg. https://doi.org/10.1007/978-3-642-28888-3_14
Download citation
DOI: https://doi.org/10.1007/978-3-642-28888-3_14
Publisher Name: Springer, Berlin, Heidelberg
Print ISBN: 978-3-642-28887-6
Online ISBN: 978-3-642-28888-3
eBook Packages: EngineeringEngineering (R0)