Abstract
In general, waste quantities are an indication of the loss of resources and the hazardous fraction in the wastes indicate the priorities and challenges for efficient waste management strategies. The specific challenges for waste management for municipal and industrial wastes are both similar, and yet uniquely different. Compositions of wastes within each category vary enormously, but as a general rule, industrial waste streams contain a wider variety and more concentrated form of hazardous materials requiring special technologies and handling procedures for them.
Access this chapter
Tax calculation will be finalised at checkout
Purchases are for personal use only
References
AAMA (American Automobile Manufacturers Association) (1997) Motor vehicle facts and figures
APME (2009) The compelling facts about plastics an analysis of European plastics production, demand and recovery for 2008. Association of Plastics Manufacturers Europe, Brussels
Ashokan P, Saxena M, Asolekar SR (2005) Coal combustion residues—environmental implications and recycling potentials. Resour Conserv Recycl 43:239–262
Zero Waste SA (South Australia) (2011) South Australia’s waste strategy 2011–2015
CPCB (Central Pollution Control Board) (1997) Spent pot lining waste from aluminum industry
CAS (Chemical Abstract Service) (2011) http://www.cas.org/index.html. Accessed 18 Oct 2011
Chapagain AK, Hoekstra AY (2008) The global component of freshwater demand and supply: an assessment of virtual water flows between nations as a result of trade in agricultural and industrial products. Water Int 33(1):19–32
Christian F, and Mads W (2009) EU as a recycling society present recycling levels of municipal waste and construction and demolition waste in the EU, European Environment Agency
DEFRA (Department for Environment Food and Rural Affairs) (2012) Construction and demolition waste, England. http://www.defra.gov.uk/statistics/environment/waste/wrfg09-condem/. Downloaded on 27 Jan 2012
El Boushy ARY, Van der Poel AFB (1994) Poultry feed from waste. Processing and use. Chapman and Hall, London
Elert E (ed) (2001) “Number of cars,” the physics handbook. http://hypertextbook.com/facts/2001/MarinaStasenko.shtml. Accessed on 24 Dec 2012
EPA (1995) Construction and demolition waste landfills
EPA (2003) Building-related construction and demolition materials amounts
EU Environmental Data Centre on Waste (Eurostat) (2008) End of live vehicles data—2008: 2010. As cited by Vladimir Simić, Branka Dimitrijević, 2011: 5th international quality conference 20 May 2011 center for quality, Faculty of Mechanical Engineering, University of Kragujevac
FAO (1990) World statistical compendium for raw hides and skins leather and leather footwear 1970–1988. Food and Agricultural Organization of the United Nations, Rome, Italy
FAO (2006) World agriculture, towards 2030/2050. FAO, Rome
FAO (2007) FAOSTAT database—forestry. Available at: http://faostat.fao.org/site/626/default.aspx. Retrieved 28 July 2009 as sited in FAO, 2010: impact of the global forest industry on atmospheric greenhouse gases
FAO (2011) Global food losses and food waste, extent caused and prevention
FAO (2011) Rice market monitor, Nov 2011, vol 15, no 4
Franklin Associates (1995) Grocery packaging in municipal solid waste: 1995 update. For grocery manufacturers of America as cited in Terry D, David MK, 2000: environmental implications of the foodservice and food retail industries, Resources for the future
GHK and BIS (Bio Intelligence Services) (2006) A study to examine the benefits of the end of life vehicles directive and the costs and benefits of a revision of the 2015 targets for recycling, re-use and recovery under the ELV directive—final report to DG environment
IFC (2007a) Environmental, health, and safety guidelines for integrated steel mills. http://www.ifc.org/ifcext/sustainability.nsf/Content/EHSGuidelines. Downloaded on 23 Oct 2011
IFC (2007b) Environmental, health, and safety guidelines for petroleum refining. http://www.ifc.org/ifcext/sustainability.nsf/Content/EHSGuidelines. Down loaded on 23 Oct 2011
Jeff S, Gregory AK (2001) Management of end-of life vehicles (ELVs) in the US, Center for Sustainable Systems
Jody BJ, Daniels EJ (2006) End-of-life vehicle recycling: the state of the art of resource recovery from shredder residue, energy systems division. Argonne National Laboratory
Kanagaraj J, Velappan KC, Chandra B, Sadulla S (2006) Solid wastes generation in the leather industry and its utilization for cleaner environment—a review
Kourmpanis B, Papadopoulos A, Moustakas K, Stylianou M, Haralambous KJ, Loizidou M (2008) Preliminary study for the management of construction and demolition waste. Waste Manage Res 26:267–275
Kumar R, Kumar S, Mehrotra SP (2005) Fly ash: towards sustainable solutions. In: Proceedings of the international conference fly ash India, pp 11–2
Lars MJ, Gabriela B (1999) Observations of solid waste landfills in developing countries: Africa, Asia, and Latin America, World Bank, Washington
Matthew JF (2009) Solid waste analysis and minimization: a systems approach. The McGraw-Hill Companies, Inc, New York
Melek CumbulAltay, NüketSivri, BurcuOnat, ÜlküS¸ ahin, MertZora˘ga, HulusiFatihAltay (2011) Recycle of metals for end-of-life vehicles (ELVs) and relation to kyoto protocol. Renew Sustain Eng Rev 15: 2447–2451
Moore CJ (2008) Synthetic polymers in the marine environment: a rapidly increasing, long-term threat. Environ Res 108(2):131–139
Nellemann C, MacDevette M, Manders T, Eickhout B, Svihus B, Prins AG, Kaltenborn BP (eds) (Feb 2009) The environmental food crisis—the environment’s role in averting future food crises. A UNEP rapid response assessment. United Nations Environment Programme
Nicholas PC (2003) Handbook of solid waste management and waste minimization technologies. Butterworth-Heinemann, Oxford
Nzihou A (2010) Waste and biomass valorization. Waste Biomass Valoriz 1(1):1–2. doi:10.1007/s12649-010-9013-y
LCA report (2003) Integrated report on “life cycle assessment study for steel sector”. National Metallurgical Laboratory, Jamshedpur, India. Mar 2003
Richard PL (1978) Hazardous solid waste from metallurgical industries. Environ Health Perspect 27:251–260
Robert G, Bette F (1991) Reducing office paper waste an INFORM special report inform Inc
Sanjay K, Rakesh K, Amitava B (2006) Innovative methodologies for the utilisation of wastes from metallurgical and allied industries. Resour Conserv Recycl 48(2006):301–314
Tamotia SK (2003) Processing of chemical, mining and metallurgical industries’ wastes. In: Keynote lecture presented in the international symposium on processing of chemical, mining and metallurgical industries’ wastes (POCMIW-2003), Bhubaneswar, India, 27–29 Aug 2003
Terry D, David MK (2000) Environmental implications of the foodservice and food retail industries. Resources for the future, Washington
TSI (Turkish Statistical Institute), Motor Vehicle Statistics (2007) [in Turkish] as cited in Melek CumbulAltay, NüketSivri, BurcuOnat, ÜlküS¸ ahin, MertZora˘ga, HulusiFatihAltay, 2011: Recycle of metals for end-of-life vehicles (ELVs) and relation to Kyoto protocol, Renewable andSustainable EnergyReviews 15(2011) pp 2447–2451
USDA (United States Department of Agriculture) (2010) Sugar: world production supply and distribution. http://www.fas.usda.gov/htp/sugar/2010/sugarMay2010.pdf. Downloaded on 31 Dec 2011
World Bank (1998) Pollution prevention and abatement handbook. http://www.ifc.org/ifcext/enviro.nsf/attachmentsbytitle/gui_pulp_wb/$file/pulp_ppah.pdf. Downloaded on 15 Dec 2012
WMW (Waste Management World) (2011a) UK food waste down, but no room for complacency, Dec 2011
WMW (Waste Management World) (2011b) Rising from the waste to energy ashes, Dec 2011
Author information
Authors and Affiliations
Corresponding author
Rights and permissions
Copyright information
© 2012 Springer-Verlag Berlin Heidelberg
About this chapter
Cite this chapter
Chandrappa, R., Das, D.B. (2012). Wastes From Industrial and Commercial Activities. In: Solid Waste Management. Environmental Science and Engineering(). Springer, Berlin, Heidelberg. https://doi.org/10.1007/978-3-642-28681-0_9
Download citation
DOI: https://doi.org/10.1007/978-3-642-28681-0_9
Published:
Publisher Name: Springer, Berlin, Heidelberg
Print ISBN: 978-3-642-28680-3
Online ISBN: 978-3-642-28681-0
eBook Packages: Earth and Environmental ScienceEarth and Environmental Science (R0)