Abstract
The book analyzes quasi-static fracture in plain concrete and reinforced concrete by means of constitutive models formulated within continuum mechanics. A continuous and discontinuous modelling approach was used. Using a continuous approach, analyses were performed using a finite element method and four different continuum concrete models: enhanced isotropic elasto-plastic, enhanced isotropic damage, enhanced anisotropic smeared crack and enhanced coupled elasto-plastic-damage model. The models were equipped with a characteristic length of micro-structure by means of a non-local and a second-gradient theory, so they could describe the formation of localized zones with a certain thickness and spacing and a related deterministic size effect. FE results converged to a finite size of localized zones via mesh refinement. In addition, numerical results of cracks in plain concrete using a discontinuous approach including cohesive (interface) elements and XFEM were presented which were also properly regularized. Numerical results were compared with corresponding laboratory tests from the scientific literature and own tests.
Chapter PDF
Keywords
- Representative Volume Element
- Localize Zone
- Plain Concrete
- Representative Volume Element Size
- Aggregate Shape
These keywords were added by machine and not by the authors. This process is experimental and the keywords may be updated as the learning algorithm improves.
References
de Borst, R.: Non-linear analysis of frictional materials. Phd Thesis. University of Delft (1986)
Gitman, I.M., Askes, H., Sluys, L.J.: Coupled-volume multi-scale modelling of quasi-brittle material. European Journal of Mechanics A/Solids 27(3), 302–327 (2008)
Menétrey, P., Willam, K.J.: Triaxial failure criterion for concrete and its generalization. ACI Structural Journal 92(3), 311–318 (1995)
Moonen, P., Carmeliet, J., Sluys, L.J.: A continuous-discontinuous approach to simulate fracture processes. Philosophical Magazine 88(28-29), 3281–3298 (2008)
Moonen, P.: Continuous-discontinuous modeling of hygrothermal damage processes in porous media. PhD Thesis. Univcersity of Delft (2009)
Nitka, M., Combe, G., Dascalu, C., Desrues, J.: Two-scale modeling of granular materials: a DEM-FEM approach. Granular Matter 13(3) (2011)
Nitka, M., Tejchman, J.: A two-scale numerical approach to granular systems. Archives of Civil Engineering LVII(3), 313–330 (2011)
Ožbolt, J., Rah, K.K., Mestrovia, D.: Influence of loading rate on concrete cone failure. International Journal of Fracture 139(2), 239–252 (2006)
Pedersen, R.R., Simone, A., Sluys, L.J.: An analysis of dynamic fracture in concrete with a continuum visco-elastic-plastic damage model. Engineering Fracture Mechanics 75(13), 3782–3805 (2008)
Pedersen, R.R.: Computational modelling of dynamic failure of cementitious materials. PhD Thesis. University of Delft (2010)
Author information
Authors and Affiliations
Corresponding author
Rights and permissions
Copyright information
© 2013 Springer-Verlag GmbH Berlin Heidelberg
About this chapter
Cite this chapter
Tejchman, J., Bobiński, J. (2013). Final Conclusions and Future Research Directions. In: Continuous and Discontinuous Modelling of Fracture in Concrete Using FEM. Springer Series in Geomechanics and Geoengineering. Springer, Berlin, Heidelberg. https://doi.org/10.1007/978-3-642-28463-2_10
Download citation
DOI: https://doi.org/10.1007/978-3-642-28463-2_10
Publisher Name: Springer, Berlin, Heidelberg
Print ISBN: 978-3-642-28462-5
Online ISBN: 978-3-642-28463-2
eBook Packages: EngineeringEngineering (R0)