Abstract
The paper introduces an experimental setup for the automatic manipulation of microcomponents, based on a 4 dof robot with Shoenflies motion and a two-camera vision system. The general architecture of the work-cell is presented. The work-cell functionality was tested via repeatability experiments using a set of vacuum grippers. Due to their intrinsic simplicity, vacuum grippers are very cheap and appear a promising solution for micromanipulation. An innovative nozzle for a vacuum gripper was designed, fabricated and tested, comparing its performance with traditional needles. The design was conceived to reduce the frequency of occlusions of the gripper and handle a wide range of particles. The performed tests evaluate the success and precision of the part release. Indeed, this is a crucial aspect of micromanipulation because microparts tend to stick to the gripper preventing the successful performance of manipulation tasks. The results confirm that adhesive effects prevent the release of components. For this reason different strategies were adopted in order to improve the efficiency in the release of stuck components. This solution increases the percentage of release and, setting appropriately the intensity of the pressure, it does not affect negatively the accuracy nor the repeatability of the positioning.
Chapter PDF
Similar content being viewed by others
Keywords
References
Van Brussel, H., et al.: Assembly of Microsystems. Annals of the CIRP 49(2), 451–472 (2000)
Chen, T., et al.: A hybrid-type electrostatically driven microgripper with an integrated vacuum tool. Sensors and Actuators A: Physical 158(2), 320–327 (2010)
Hesselbach, J., et al.: Centering electrostatic microgripper and magazines for microassembly tasks. In: Proc. of SPIE, Microrobotics and Microassembly III, Newton, USA, October 29-30, vol. 4568, pp. 270–277 (1999)
Biganzoli, F., et al.: Development of a gripping system based on capillary force. In: Proc. of 6th IEEE ISATP, Montreal, Canada, July 19-21 (2005)
Gosse, C., Croquette, V.: Magnetic tweezers: Micromanipulation and force measurement at the molecular level. Biophys. J. 82(6), 3314–3329 (2002)
Kochan, A.: European project develops ice gripper for micro-sized components. Assembly Automation 17(2), 114–115 (1997)
Feddema, J.T., et al.: Micro-assembly planning with van der Waals force. In: Proc. of the IEEE International Symposium on Assembly and Task Planning, July 21-24, pp. 32–38 (1999)
Enikov, E.T., Lazarov, K.V.: Optically transparent gripper for microassembly. In: SPIE, vol. 4568, pp. 40–49 (2001)
Bark, C., Binneboese, T.: Gripping with low viscosity fluid. In: Proc. of IEEE Int. Workshop on MEMS, pp. 301–305 (1998)
Grutzeck, H., et al.: Downscaling of grippers for micro assembly. Microsystem Technologies 8, 27–31 (2002)
Obata, K.J., et al.: A scheme for micro-manipulation based on capillary force. J. Fluid Mech. 498, 113–121 (2004)
Saito, S., et al.: Capillary force with a concave probe-tip for micromanipulation. Applied Physics Letters 87(23), 234103-234103-3 (2005)
Zesch, W., et al.: Vacuum tool for handling microobjects with a NanoRobot. In: Proc. of ICRA, pp. 1761–1776 (1997)
Rambin, C.L., Warrington, R.O.: Micro-assembly with a focused laser beam. In: Proc. of IEEE MEMS, pp. 285–290 (1994)
Petrovic, D., et al.: Gripping tools for handling and assembly of microcomponents. In: Proc. of 23rd Int. Conf. on Microelectronics, vol. 1, pp. 247–250 (2002)
Tamadazte, B., et al.: Multiscale Calibration of a Photon Videomicroscope for Visual Servo Control: Application to MEMS Micromanipulation and Microassembly Sensors & Transducers Journal 5(special issue), 37–52 (2009)
Author information
Authors and Affiliations
Editor information
Rights and permissions
Copyright information
© 2012 IFIP International Federation for Information Processing
About this paper
Cite this paper
Ruggeri, S., Fontana, G., Pagano, C., Fassi, I., Legnani, G. (2012). Handling and Manipulation of Microcomponents: Work-Cell Design and Preliminary Experiments. In: Ratchev, S. (eds) Precision Assembly Technologies and Systems. IPAS 2012. IFIP Advances in Information and Communication Technology, vol 371. Springer, Berlin, Heidelberg. https://doi.org/10.1007/978-3-642-28163-1_9
Download citation
DOI: https://doi.org/10.1007/978-3-642-28163-1_9
Publisher Name: Springer, Berlin, Heidelberg
Print ISBN: 978-3-642-28162-4
Online ISBN: 978-3-642-28163-1
eBook Packages: Computer ScienceComputer Science (R0)