Abstract
This paper presents a buck DC-DC converter with PWM and PFM mode which has high efficiency. The converter operates in PWM at nominal load current (>80mA) with the fixed switching frequency of 1 MHz, and enters PFM at light load current (<80mA). When entering PFM, the converter will shut down several modules to reduce quiescent current and make the switching frequency greatly declined. The chip was implemented using a TSMC 0.18um CMOS 1P3M mixed-signal process. As the simulation indicates, the converter can rapidly switch between PWM and PFM according to the load current, which is suitable for battery-support portable system.
Access this chapter
Tax calculation will be finalised at checkout
Purchases are for personal use only
Preview
Unable to display preview. Download preview PDF.
References
Zhang, X.: Digital PWM/PFM controller with input voltage feed-forward for synchronous buck converters. In: Twenty-Third Annual IEEE Applied Power Electronics Conference and Exposition, APEC 2008 (2008)
Safu, B., Rincon-Mora, G.A.: High-efficiency dual-mode, dynam-ie, buck-boost power supply IC for portable applications. In: Proc. IEEE VLSID (2005)
Xiao, J., Peterehev, A., Zhang, J.: An ultra-low-power digitally-controlled buck converter IC for cellular phone applications. In: Nineteenth Annual EE APEC (2004)
Sahu, B., Rincon-Mora, G.A.: A low voltage, noninverting, dynamic, synchronous buck-boost converter for portable applications. IEEE Trans. Power Electron (2004)
Wan-Rone Liou, A.: High efficiency dual-modebuck converter IC for portable applications. IEEE Transactions on Power Electronics 23(2), 667–677 (2008)
Vorperian, V.: Simplified analysis of PWM converters using the PWM switch Part I: Continuous conduction mode, Part II: Dis-continuous conduction mode. IEEE Trans. Aerosp. Electron Syst., AESÂ 26, 490 (1990)
Author information
Authors and Affiliations
Corresponding author
Editor information
Editors and Affiliations
Rights and permissions
Copyright information
© 2012 Springer-Verlag Berlin Heidelberg
About this paper
Cite this paper
Wang, R., Han, Z., Wu, J. (2012). Design of a PWM/PFM Buck DC-DC Converter with High Efficiency. In: Jin, D., Lin, S. (eds) Advances in Electronic Engineering, Communication and Management Vol.1. Lecture Notes in Electrical Engineering, vol 139. Springer, Berlin, Heidelberg. https://doi.org/10.1007/978-3-642-27287-5_49
Download citation
DOI: https://doi.org/10.1007/978-3-642-27287-5_49
Published:
Publisher Name: Springer, Berlin, Heidelberg
Print ISBN: 978-3-642-27286-8
Online ISBN: 978-3-642-27287-5
eBook Packages: EngineeringEngineering (R0)