Abstract
This paper presents an automatic gain control (AGC) circuit which is used in a single-chip UHF RFID reader transceiver system. The VGA is a fully differential circuit with differential output swing of 1-Vpp. The gain of the two VGAs can be varied linearly from 0dB to 60dB with respect to a control voltage from 0.28V to 0.93V. The exponential voltage to current (V-I) convertor is based on Taylor’s series expansion. The AGC circuit consumes 4.5mA current and has a 2.7MHz 3-dB bandwidth when the gain is 60dB. A differential positive peak detector is used in the AGC circuit loop. The AGC circuit is based on UMC 0.18-μm single-poly six-metal CMOS process technology.
Access this chapter
Tax calculation will be finalised at checkout
Purchases are for personal use only
Preview
Unable to display preview. Download preview PDF.
References
Zhang, H., Wang, G., Lu, M.: Analysis and Implementation of Digital Automatic Gain Control for DAB Baseband Decoder. IEEE Transactions on Consumer Electronics 57(2), 327–334 (2011)
Jang, J.-H., Choi, H.-J.: A Fast Automatic Gain Control Scheme for Initial Cell Search in 3GPP LTE TDD System. In: 13th International Conference on ICACT (2011)
Wang, X., Chi, B., Wang, Z.: A Low-Power High-Data-Rate ASK IF Receiver With a Digital-Control AGC Loop. IEEE Transactions on Circuits and Systems 57(8) (August 2010)
Pérez, J.P.A., Calvo, B., Celma, S.: A High-Performance CMOS Feedforward AGC Circuit for a WLAN Receiver. IEEE Transactions on Industrial Electeonics 57(8), 2851–2857 (2010)
Xu, H., Shi, Y., Dai, F.F.: A CMMB mobile TV tuner frontend with integrated RSSI for dual-band applications. In: IEEE 8th International Conference on ASIC (October 2009)
Abdel-Hafez, I.L., Khalaf, Y.A., Farag, F.A.: Design of Wide Band PVGA for UWB Applications. In: Electronics, Communications and Photonics Conference, 2011 Saudi International (April 2011)
Khoury, J.M.: On the design of constant settling time AGC circuits. IEEE Trans. Circuits Syst. II, Analog Digit. Signal Process. 45(3), 283–294 (1998)
Park, S.-B., Wilson, J.E., Ismail, M.: The chip-peak detectors for multistandard wireless receivers. IEEE Circuits and Devices Magazine 22(6), 6–9 (2006)
Cheung, H.Y., Cheung, K.S., Lau, J.: A low power monolithic AGC with automatic DC offset cancellation for direct conversion hybrid CDMA transceiver used in telemetering. In: ISCAS 2001, Sydney, vol. 4, pp. 390–393 (2001)
Duong, Q.-H., Nguyen, T.-K., Lee, S.-G.: A low voltage low-power, and high dB-linear CMOS exponential V-I Convener. In: IEEE, Asia-Pacific Microwave Symposium, pp. 409–412 (November 2003)
Ta, C.M., Yong, C.H., Yeoh, W.G.: A 2.7mW 0.064mm2 linear-in-dB VGA with 60dB tuning range, 100MHz bandwidth, and two DC offset cancellation loops. In: RFIT 2005-IEEE International Workshop on Radio-Frequency Integration Technology, pp. 74–77 (2005)
Author information
Authors and Affiliations
Corresponding author
Editor information
Editors and Affiliations
Rights and permissions
Copyright information
© 2011 Springer-Verlag Berlin Heidelberg
About this paper
Cite this paper
Wenbo, W., Luhong, M., Xindong, X., Yan, C., Shilin, Z., Sheng, X. (2011). An Automatic Gain Control Circuit for a Single-Chip UHF RFID Reader Transceiver. In: Zheng, D. (eds) Advances in Electrical Engineering and Electrical Machines. Lecture Notes in Electrical Engineering, vol 134. Springer, Berlin, Heidelberg. https://doi.org/10.1007/978-3-642-25905-0_18
Download citation
DOI: https://doi.org/10.1007/978-3-642-25905-0_18
Published:
Publisher Name: Springer, Berlin, Heidelberg
Print ISBN: 978-3-642-25904-3
Online ISBN: 978-3-642-25905-0
eBook Packages: EngineeringEngineering (R0)