Advertisement

Modeling Distance Nonlinearity in ToF Cameras and Correction Based on Integration Time Offsets

  • Claudio Uriarte
  • Bernd Scholz-Reiter
  • Sheshu Kalaparambathu Ramanandan
  • Dieter Kraus
Part of the Lecture Notes in Computer Science book series (LNCS, volume 7042)

Abstract

Time of Flight (ToF) cameras capture the depth images based on a new sensor technology allowing them to process the whole 3D scenario at once. These cameras deliver the intensity as well as the amplitude information. Due to difference in travel time of the rays reaching the sensor array, the captured distance information is affected by non linearities. In this paper, the authors propose three models (the monostatic, bistatic and optimized) for correcting the distance non linearity. The thermal characteristic of the sensor is studied in real time and analysis for integration time offsets for different reflectivity boards are carried out. The correction results are demonstrated for different reflectivity targets based on our models and analyzed integration offsets.

Keywords

Photonic-Mixer-Device calibration integration time ToF camera bistatic modeling monostatic modeling 

References

  1. 1.
    PMD Technologies GmbH, http://www.pmdtec.com/
  2. 2.
    Rapp, H.: Experimental and Theoretical Investigation of Correlating TOF-Camera Systems. Diploma Thesis, University of Heidelberg, Heidelberg (2007)Google Scholar
  3. 3.
    Peters, V., Loffeld, O.: A Bistatic Simulation Approach for a High Resolution 3D PMD-Camera’. International Journal of Intelligent Systems Technologies and Applications 5(3/4) (2008)Google Scholar
  4. 4.
    Jamtsho, S., Lichti, D.: Modelling Scattering Distortion in 3D Range Camera. International Archives of Photogrammetry, Remote Sensing and Spatial Information Sciences, Newcastle, vol. XXXVIII (2010)Google Scholar
  5. 5.
    Mure-Dubois, J., Hugli, H.: Optimized Scattering Compensation for Time-of-Flight Camera. In: Proceedings of the SPIE Three-Dimensional Methodes for Inspection and Metrology V, Boston, vol. 6762 (2007)Google Scholar
  6. 6.
    Zhang, Z.: A Flexible New Technique for Camera Calibration. IEEE Transactions on Pattern Analysis and Machine Intelligence 22 (2000)Google Scholar
  7. 7.
    Oprisescu, S., Falie, D., Ciuc, M., Buzuloiu, V.: Measurements with ToF Cameras and their necessary corrections. In: Proceedings of the IEEE International Symposium on Signals, Circuits & Systems (ISSCS), Iasi, vol. 1, pp. 221–224 (2007)Google Scholar
  8. 8.
    Lindner, M., Schiller, I., Kolb, A., Koch, R.: Time-of-Flight sensor calibration for accurate range sensing. Computer Vision and Image Understanding 114(12), 1318–1328 (2010)CrossRefGoogle Scholar
  9. 9.
    Kahlmann, T., Ingensand, H.: Calibration and Development for Increased Accuracy of 3D Range Imaging Cameras. In: Proceedings of the ISPRS Com., Dresden (2006)Google Scholar

Copyright information

© Springer-Verlag Berlin Heidelberg 2011

Authors and Affiliations

  • Claudio Uriarte
    • 1
  • Bernd Scholz-Reiter
    • 1
  • Sheshu Kalaparambathu Ramanandan
    • 1
    • 2
  • Dieter Kraus
    • 2
  1. 1.Bremer Institut für Produktion und LogistikBIBABremenGermany
  2. 2.Institute of Water-Acoustics, Sonar-Engineering and Signal-TheoryUniversity of Applied Sciences BremenBremenGermany

Personalised recommendations