Abstract
The functional interface between information processing—in the form of electrical signals—and mechanical structure—in the form of forces/torques and motion variables—is of key importance in a mechatronic product. The bi-directional conversion of energy from electrical to mechanical is a key component of the primary product task “perform purposeful motions”. The multiple, diverse conversion principles available today can also be integrated into a mechatronic product in a functionally and physically compact manner in the form of mechatronic transducers. Along with a basic grasp of these conversion principles, understanding the influences which parameters describing the transducer have on its transfer characteristics is of particular interest in systems design.
Access this chapter
Tax calculation will be finalised at checkout
Purchases are for personal use only
Preview
Unable to display preview. Download preview PDF.
Similar content being viewed by others
Bibliography
Anderson, E. H., N. W. Hagood and J. M. Goodliffe (1992). Self-sensing piezoelectric actuation -- Analysis and application to controlled structures Proceedings of the 33rd AIAA/ASME/ASC/AHS Structures, Structural Dynamics and Materials Conference Dallas, TX. pp.2141–2155.
Apostolyuk, V. (2006). Theory and Design of Micromechanical Vibratory Gyroscopes. MEMS/NEMS Handbook, Techniques and Applications. C. T. Leondes. Springer. 1: 173–195.
Bronshtein, I. N., K. A. Semendyayev, G. Musiol and H. Mühlig (2005). Handbook of Mathematics. Springer.
Brusa, E., S. Carabelli, F. Carraro and A. Tonoli (1998). “Electromechanical Tuning of Self-Sensing Piezoelectric Transducers.” Journal of Intelligent Material Systems and Structures 9(3): 198–209.
Chan, K. and W. Liao (2009). “Self-sensing actuators with passive damping for adaptive vibration control of hard disk drives.” Microsystem Technologies 15(3): 355–366.
DIN (1988). Guide to dynamic measurements of piezoelectric ceramics with high electromechanical coupling; identical with IEC 60483, edition 1976. DIN IEC 60483: 1988–04. DIN.
Dosch, J. J., D. J. Inman and E. Garcia (1992). “A Self-Sensing Piezoelectric Actuator for Collocated Control.” Journal of Intelligent Material Systems and Structures 3(1): 166–185.
Fleming, A. J., S. Behrens and S. O. R. Moheimani (2002). “Optimization and implementation of multimode piezoelectric shunt damping systems.” Mechatronics, IEEE/ASME Transactions on 7(1): 87–94.
Franklin, G. F., J. D. Powell and M. L. Workman (1998). Digital Control of Dynamic Systems. Addison-Wesley.
Funato, H., A. Kawamura and K. Kamiyama (1997). “Realization of negative inductance using variable active-passive reactance (VAPAR).” Power Electronics, IEEE Transactions on 12(4): 589–596.
Goldstein, H., C. P. Poole and J. L. Safko (2001). Classical Mechanics. Addison Wesley.
Hagood, N. W. and A. v. Flotow (1991). “Damping of structural vibrations with piezoelectric materials and passive electrical networks.” Journal of Sound and Vibration 146(2): 243–268.
Hartog, J. P. D. (1947). Mechanical Vibrations. McGraw-Hill.
Hollkamp, J. J. (1994). “Multimodal Passive Vibration Suppression with Piezoelectric Materials and Resonant Shunts.” Journal of Intelligent Material Systems and Structures 5(1): 49–57.
Horowitz, I. M. (1963). Synthesis of Feedback Systems. New York. Academic Press.
IEEE (1988). “IEEE standard on piezoelectricity.” ANSI/IEEE Std 176–1987.
Karnopp, D. C., D. L. Margolis and R. C. Rosenberg (2006). System dynamics: modeling and simulation of mechatronic systems. John Wiley & Sons, Inc.
Lehr, E. (1930). “Untersuchung der erzwungenen Koppelschwingungen eines elektromechanischen Systems unter Verwendung eines graphischen Verfahrens.” Archiv für Elektrotechnik XXIV.: 330–348.
Lorenz, R. D. (1999). Advances in electric drive control. Electric Machines and Drives, 1999. International Conference IEMD ’99. pp.9–16.
Marneffe, B. d. and A. Preumont (2008). “Vibration damping with negative capacitance shunts: theory and experiment.” Smart Materials and Structures 17(035015): 9.
Mateu, L. and F. Moll (2007). System-Level Simulation of a Self-Powered Sensor with Piezoelectric Energy Harvesting. Sensor Technologies and Applications, 2007. SensorComm 2007. International Conference on. pp. 399- 404.
Mohammed, A. (1966). “Expressions for the Electromechanical Coupling Factor in Terms of Critical Frequencies.” The Journal of the Acoustical Society of America 39(2): 289–293.
Moheimani, S. O. R. (2003). “A survey of recent innovations in vibration damping and control using shunted piezoelectric transducers.” Control Systems Technology, IEEE Transactions on 11(4): 482–494.
Moheimani, S. O. R. and S. Behrens (2004). “Multimode piezoelectric shunt damping with a highly resonant impedance.” Control Systems Technology, IEEE Transactions on 12(3): 484–491.
Neubauer, M., R. Oleskiewicz and K. Popp (2005). “Comparison of Damping Performance of Tuned Mass Dampers and Shunted Piezo Elements.” PAMM 5(1): 117–118.
Ogata, K. (2010). Modern Control Engineering. Prentice Hall.
Oleskiewicz, R., M. Neubauer, T. Krzyzynski and K. Popp (2005). “Synthetic Impedance Circuits in Semi-Passive Vibration Control with Piezo- Ceramics -- Efficiency and Limitations.” PAMM 5(1): 121–122.
Paulitsch, C., P. Gardonio and S. J. Elliott (2006). “Active vibration damping using self-sensing, electrodynamic actuators.” Smart Materials and Structures 15: 499–508.
Preumont, A. (2002). Vibration Control of Active Structures -- An Introduction. Kluwer Academic Publishers.
Preumont, A. (2006). Mechatronics, Dynamics of Electromechanical and Piezoelectric Systems. Springer.
Priya, S. (2007). “Advances in energy harvesting using low profile piezoelectric transducers.” Journal of Electroceramics 19(1): 167–184.
Reinschke, K. and P. Schwarz (1976). Verfahren zur rechnergestützten Analyse linearer Netzwerke. Akademie Verlag Berlin.
Schenk, H., P. Durr, T. Haase, D. Kunze, et al. (2000). “Large deflection micromechanical scanning mirrors for linear scans and pattern generation.” Selected Topics in Quantum Electronics, IEEE Journal of 6(5): 715–722.
Schuster, T., T. Sandner and H. Lakner (2006). Investigations on an Integrated Optical Position Detection of Micromachined Scanning Mirrors. Photonics and Microsystems, 2006 International Students and Young Scientists Workshop. pp.55–58.
Senturia, S. D. (2001). Microsystem Design. Kluwer Academic Publishers.
Shu, Y. C. and I. C. Lien (2006). “Analysis of power output for piezoelectric energy harvesting systems.” Smart Materials and Structures 15: 1499–1512.
Thomas, R. E., A. J. Rosa and G. J. Toussaint (2009). The Analysis and Design of Linear Circuits. John Wiley and Sons, Inc.
Tilmans, H. A. C. (1996). “Equivalent circuit representation of electromechanical transducers: I. Lumped-parameter systems.” Journal of Micromechanics and Microengineering (6): 157–176.
Twiefel, J., B. Richter, T. Sattel and J. Wallaschek (2008). “Power output estimation and experimental validation for piezoelectric energy harvesting systems.” Journal of Electroceramics 20(3): 203–208.
VDI (2006). Schwingungsdämpfer und Schwingungstilger -- Schwingungstilger und Schwingungstilgung (in German) -- Dynamic damper and dynamic vibration absorber -- Dynamic vibration absorber and dynamic vibration absorption (in English). V. D. I. VDI. 3833 Blatt 2::2006–12.
Vischer, D. and H. Bleuler (1993). “Self-sensing active magnetic levitation.” Magnetics, IEEE Transactions on 29(2): 1276–1281.
Ward, J. K. and S. Behrens (2008). “Adaptive learning algorithms for vibration energy harvesting.” Smart Materials and Structures 17: 035025 (035029 pp).
Wellstead, P. E. (1979). Introduction to Physical System Modelling. London. Academic Press Ltd.
Yaralioglu, G. G., A. S. Ergun, B. Bayram, E. Haeggstrom, et al. (2003). “Calculation and measurement of electromechanical coupling coefficient of capacitive micromachined ultrasonic transducers.” Ultrasonics, Ferroelectrics and Frequency Control, IEEE Transactions on 50(4): 449–456.
Author information
Authors and Affiliations
Corresponding author
Rights and permissions
Copyright information
© 2012 SpringerVerlag Berlin Heidelberg
About this chapter
Cite this chapter
Janschek, K., Richmond, K. (2012). Functional Realization: The Generic Mechatronic Transducer. In: Mechatronic Systems Design. Springer, Berlin, Heidelberg. https://doi.org/10.1007/978-3-642-17531-2_5
Download citation
DOI: https://doi.org/10.1007/978-3-642-17531-2_5
Published:
Publisher Name: Springer, Berlin, Heidelberg
Print ISBN: 978-3-642-17530-5
Online ISBN: 978-3-642-17531-2
eBook Packages: EngineeringEngineering (R0)