Abstract
A Manufacture Support System using Taguchi Methods was developed and evaluated. This system consists of a Taguchi methods part, a CAE simulation part and a management part of productivity. The Taguchi methods part was firstly used for calculating the average and the standard deviation regarding all combinations using all parameters. The CAE part was then used for shortening the total time of evaluation. The management part of productivity was finally used to select the optimum combination of all parameters for success percentage, accuracy, manufacturing time and total cost. The spring back of warm press forming on magnesium alloy plate was investigated for evaluating this system. It is concluded from the result that (1) This method effectively predicted optimum process conditions in each priority and (2) The predicted results conformed to the results of the spring back test.
Chapter PDF
Similar content being viewed by others
Keywords
References
Makino, T.: Optimization of Exhaust Port using Computer Simulation. In: Proceedings of the 13th Quality Engineering Society Conference, pp. 6–9 (2005)
Fujikawa, S.: Optimum Parameter Design using the Taguchi methods for Finite-Element Analysis of 3D Forging Deformation. Journal of the Japan Society of Technology, for Plasticity 40(466), 1061–1065 (1999)
Tatebayashi, K.: Computer Aided Engineering Combined with Taguchi methods. In: Proceeding of the 2005 Annual Meeting of the Japan Society of Mechanical Engineering, vol. 8, No. 05-1, pp. 224–225 (September 2005)
Nagakura, S., et al.: Iwanami Physics and Chemistry Dictionary, Iwanami Shoten, p. 1234 (1988) (in Japanese)
Sugai, H., et al.: Prediction of Optimum Machining Condition in Press Forming Using Taguchi methods and FEM Simulation. Transactions of the JSME 72(721), 3044–3051 (2006) (in Japanese)
Author information
Authors and Affiliations
Editor information
Editors and Affiliations
Rights and permissions
Copyright information
© 2010 IFIP International Federation for Information Processing
About this paper
Cite this paper
Tanabe, I. (2010). Development of Manufacture Support System Using Taguchi Methods. In: Vallespir, B., Alix, T. (eds) Advances in Production Management Systems. New Challenges, New Approaches. APMS 2009. IFIP Advances in Information and Communication Technology, vol 338. Springer, Berlin, Heidelberg. https://doi.org/10.1007/978-3-642-16358-6_65
Download citation
DOI: https://doi.org/10.1007/978-3-642-16358-6_65
Publisher Name: Springer, Berlin, Heidelberg
Print ISBN: 978-3-642-16357-9
Online ISBN: 978-3-642-16358-6
eBook Packages: Computer ScienceComputer Science (R0)