Abstract
This chapter gives a survey on the tribological performance of organoclay and carbon nanotube reinforced rubbers of both conventional (thermoset) and thermoplastic versions. The unlubricated friction and wear of rubbers were grouped in abrasion-, sliding- and rolling-types in order to support the overview. It was highlighted that the coefficient of friction and specific wear rate strongly depend on the configuration and testing parameters of the tribotests used. It was demonstrated that the incorporation of the above nanofillers is not always associated with improved resistance to wear and reduced coefficient of friction. Further experimental studies, data mining through proper statistical techniques, and extensive modeling works are needed to realize the potential of the above nanofillers in tribological applications, and to deduce relationships between wear and other characteristics (e.g. network-, mechanical response-related) of rubbers.
Access this chapter
Tax calculation will be finalised at checkout
Purchases are for personal use only
References
Kim, Y.A., Hayashi, T., Endo, M., Gotoh, Y., Wada, N., Seiyama, J.: Fabrication of aligned carbon nanotube-filled rubber composite. Scripta Mater. 54, 31–35 (2006)
Vast, L., Philippin, G., Destrée, A., Moreau, N., Fonseca, A., Nagy, J.B., Delhalle, J., Mekhalif, Z.: Chemical functionalization by a fluorinated trichlorosilane of multi-walled carbon nanotubes. Nanotechnology 15, 781–785 (2004)
Ma, P.C., Kim, J.-K., Tang, B.Z.: Functionalization of carbon nanotubes using a silane coupling agent. Carbon 44, 3232–3238 (2006)
Kokaia, F., Koshioa, A., Shiraishia, M., Matsutaa, T., Shimodaa, S., Ishiharab, M., Kogab, Y., Denoc, H.: Modification of carbon nanotubes by laser ablation. Diam. Relat. Mater. 14, 724–728 (2005)
Breton, Y., Delpeux, S., Benoit, R., Salvetat, J.P., Sinturel, C., Beguin, F., Bonnamy, S.: Functionalization of multiwall carbon nanotubes: properties of nanotubes-epoxy composites. Mol. Cryst. Liq. Cryst. 387, 135–140 (2002)
Hill, D.E., Lin, Y., Rao, A.M., Allard, L.F., Sun, Y.-P.: Functionalization of carbon nanotubes with polystyrene. Macromolecules 35, 9466–9471 (2002)
Sui, G., Zhong, W.H., Yang, X.P., Yu, Y.H.: Curing kinetics and mechanical behavior of natural rubber reinforced with pretreated carbon nanotubes. Mater. Sci. Eng. A-Struct. 485, 524–531 (2008)
Sui, G., Zhong, W.H., Yang, X.P., Yu, Y.H., Zhao, S.H.: Preparation and properties of natural rubber composites reinforced with pretreated carbon nanotubes. Polym. Adv. Technol. 19, 1543–1549 (2008)
Falco, A.D., Goyanes, S., Rubiolo, G.H., Mondragon, I., Marzocca, A.: Carbon nanotubes as reinforcement of styrene–butadiene rubber. Appl. Surf. Sci. 254, 262–265 (2007)
Das, A., Stöckelhuber, K.W., Jurk, R., Fritzsche, J., Klüppel, M., Heinrich, G.: Coupling activity of ionic liquids between diene elastomers and multi-walled carbon nanotubes. Carbon 47, 3313–3321 (2009)
Atieh, M.A., Girun, N., Ahmadun, F.-R., Guan, C.T., Mahdi, E.-S., Baik, D.R.: Multi-wall carbon nanotubes/natural rubber nanocomposite. J. Nanotechnol. Online (2005). doi:10.2240/azonjo0106
Luo, Y., Wang, C., Li, Z.: Preparation, fabrication and response behavior of HTBN/TDI/MWCNT composite sensing film by in situ dispersed polymerization. Synth. Met. 157, 390–400 (2007)
Bokobza, L., Kolodziej, M.: On the use of carbon nanotubes as reinforcing fillers for elastomeric materials. Polym. Int. 55, 1090–1098 (2006)
Bokobza, L., Belin, C.: Effect of strain on the properties of a styrene–butadiene rubber filled with multiwall carbon nanotubes. J. Appl. Polym. Sci. 105, 2054–2061 (2007)
Faulkner, R.W., Mumby, K.J., Fisherm A., Jozokos, T., Zhou, S.: Multiwall carbon nanotube reinforcement of HNBR and FKM. http://rethink-technologies.com/static/Hyperion_Fibrils_in_FKM_and_HNBR_ACS_Presentation-KM_001e.pdf. (2009)
Fritzsche, J., Lorenz, H., Klüppel, M.: CNT based elastomer-hybrid-nanocomposites with promising mechanical and electrical properties. Macromol. Mater. Eng. 294, 551–560 (2009)
Bokobza, L., Rhamani, M., Belin, C., Bruneel, J.-C., Bounia, N.-E.E.: Blends of carbon blacks and multiwall carbon nanotubes as reinforcing fillers for hydrocarbon rubbers. J. Polym. Sci. Pol. Phys. 46, 1939–1951 (2008)
Zhu, J., Kim, J.D., Peng, H., Margrave, J.L., Khabashesku, V.N., Barrera, E.V.: Improving the dispersion and integration of single-walled carbon nanotubes in epoxy composites through functionalization. Nano. Lett. 3, 1107–1113 (2003)
Jung, Y.C., Sahoo, N.G., Cho, J.W.: Polymeric nanocomposites of polyurethane block copolymers and functionalized multi-walled carbon nanotubes as crosslinkers. Macromol. Rapid Comm. 27, 126–131 (2006)
Xia, H., Song, M.: Preparation and characterisation of polyurethane grafted single-walled carbon nanotubes and derived polyurethane nanocomposites. J. Mater. Chem. 16, 1843–1851 (2006)
Coleman, J.N., Cadek, M., Blake, R., Nicolsi, V., Ryan, K.P., Belton, C., Fonseca, A., Nagy, J.B., Gun’ko, Y.K., Blau, W.J.: High-performance nanotube-reinforced plastics: understanding the mechanism of strength increase. Adv. Funct. Mater. 14, 791–798 (2004)
Claes, M., Duoin, G., Luizi, F.: Latest developments in carbon nanotubes based nanocomposites. Rubber World 239, 28–34 (2009)
Sato, Y., Hasegawa, K., Nodasaka, Y., Motomiya, K., Namura, M., Ito, N., Jeyadevan, B., Tohji, K.: Reinforcement of rubber using single-walled nanotube soot and its shock dampening properties. Carbon 46, 1506–1517 (2008)
Bokobza, L.: Multiwall carbon nanotube elastomeric composites: A review. Polymer 48, 4907–4920 (2007)
Bhattacharyya, S., Sinturel, C., Bahloul, O., Saboungi, M.-L., Thomas, S., Salvetat, J.-P.: Improving reinforcement of natural rubber by networking of activated carbon nanotubes. Carbon 46, 1037–1045 (2008)
López-Manchado, M.A., Biagiotti, J., Valentini, L., Kenny, J.M.: Dynamic mechanical and Raman spectroscopy studies on interaction between single-walled carbon nanotubes and natural rubber. J. Appl. Polym. Sci. 92, 3394–3400 (2004)
Lu, L., Zhou, Z., Zhang, Y., Wang, S., Zhang, Y.: Reinforcement of styrene–butadiene-styrene tri-block copolymer by multi-walled carbon nanotubes via melt mixing. Carbon 45, 2621–2627 (2007)
Lu, L., Zhai, Y., Zhang, Y., Ong, C., Guo, S.: Reinforcement of hydrogenated nitrile-butadiene rubber by multi-walled carbon nanotubes. Appl. Surf. Sci. 255, 2162–2166 (2008)
Valentini, L., Biagiotti, J., Kenny, J.M., Manchado, M.A.L.: Physical and mechanical behavior of single-walled carbon nanotube/polypropylene/ethylene-propylene-diene rubber nanocomposites. J. Appl. Polym. Sci. 89, 2657–2663 (2003)
Karger-Kocsis, J., Felhös, D., Thomann, R.: Tribological behavior of a carbon-nanofiber-modified Santoprene thermoplastic elastomer under dry sliding and fretting conditions against steel. J. Appl. Polym. Sci. 108, 724–730 (2008)
Perez, L.D., Zuluaga, M.A., Kyu, T., Mark, J.E., Lopez, B.L.: Preparation, characterization, and physical properties of multiwall carbon nanotube/elastomers composites. Polym. Eng. Sci. 49, 866–874 (2009)
Byres, J.T.: Fillers for balancing passenger tire tread properties. Rubber Chem. Technol. 75, 527–547 (2002)
Paglicawan, M.A., Kim, J.K., Bang, D.-S.: Dispersion of multiwalled carbon nanotubes in thermoplastic elastomer gels: morphological, rheological, and electrical properties. Polym. Compos. 31, 210–217 (2009)
Meincke, O., Kaempfer, D., Weickmann, H., Friedrich, C., Vathauer, M., Warth, H.: Mechanical properties and electrical conductivity of carbon-nanotube filled polyamide-6 and its blends with acrylonitrile/butadiene/styrene. Polymer 45, 739–748 (2007)
Li, Q., Xue, Q.Z., Gao, X.L., Zheng, Q.B.: Temperature dependence of the electrical properties of the carbon nanotube/polymer composites. Exp. Polym. Lett. 3, 769–777 (2009)
Pötschke, P., Dudkin, S.M., Alig, I.: Dielectric spectroscopy on melt processed polycarbonate multiwalled carbon nanotube composites. Polymer 44, 5023–5030 (2003)
Elsworth, M.W.: Organoclay-polymer composites. US Patent, 5962553, 1999
Chattopadhyay, D.K., Mishra, A.K., Sreedhar, B., Raju, K.V.S.N.: Thermal and viscoelastic properties of polyurethane-imide/clay hybrid coatings. Polym. Deg. Stab. 91, 1837–1849 (2006)
Yusoh, K., Jin, J., Song, M.: Subsurface mechanical properties of polyurethane/organoclay nanocomposite thin films studied by nanoindentation. Prog. Org. Coat. 67, 220–224 (2010)
Choi, W.J., Kim, S.H., Kim, Y.J., Kim, S.C.: Synthesis of a chain-extended organifier and properties of polyurethane/clay nanocomposites. Polymer 45, 6045–6057 (2004)
Gatos, K.G., Karger-Kocsis, J.: Effects of primary and quarternary intercalants on the organoclay dispersion in a sulfur-cured EPDM rubber. Polymer 46, 3069–3076 (2005)
Wang, S., Zhang, Y., Ren, W., Zhang, Y., Lin, H.: Morphology, mechanical and optical properties of transparent BR/clay nanocomposites. Polym. Test. 24, 766–774 (2005)
Pal, K., Rajasekar, R., Kang, D.J., Zhang, Z.X., Kim, J.K., Das, C.K.: Effect of epoxidized natural rubber-organoclay nanocomposites on NR/high styrene rubber blends with fillers. Mater. Design 30, 4035–4042 (2009)
Sharif, J., Yunus, W.M.Z.W., Dahlan, K.Z.H.M., Ahmad, M.H.: Preparation and properties of radiation crosslinked natural rubber/clay nanocomposites. Polym. Test. 24, 211–217 (2005)
Carretero-González, J., ValentÃn, J.-L., Arroyo, M., Saalwächter, K., Lopez-Manchado, M.A.: Natural rubber/clay nanocomposites: Influence of poly(ethylene glycol) on the silicate dispersion and local chain order network. Eur. Polym. J. 44, 3493–3500 (2008)
Yang, I.-K., Tsai, P.-H.: Intercalation and viscoelasticity of poly(ether-block-amide) copolymer/montmorillonite nanocomposites: Effect of surfactant. Polymer 47, 5131–5140 (2006)
Wang, X.-P., Huang, A.-M., Jia, D.-M., Li, Y.-M.: From exfoliation to intercalation-changes in morphology of HNBR/organoclay nanocomposites. Eur. Polym. J. 44, 2784–2789 (2008)
Lim, S.-H., Dasari, A., Yu, Z.-Z., Mai, Y.-W., Liu, S., Yong, M.S.: Fracture toughness of nylon 6/organoclay/elastomers nanocomposites. Compos. Sci. Technol. 67, 2914–2923 (2007)
Sun, T., Dong, X., Du, K., Wang, K., Fu, Q., Han, C.C.: Structural and thermal stabilization of isotactic polypropylene/organoclay/montmorillonite/poly(ethylene-co-octene) nanocomposites by an elastomer component. Polymer 49, 588–598 (2008)
Chiu, F.-C., Lai, S.-M., Chen, Y.-L., Lee, T.-H.: Investigation of the polyamide 6/organoclay nanocomposites with or without a maleated polyolefin elastomers as a toughener. Polymer 46, 11600–11609 (2005)
Kim, B.K., Seo, J.W., Jeong, H.M.: Morphology and properties of waterborne polyurethane/clay nanocomposites. Eur. Polym. J. 39, 85–91 (2003)
Zhu, L., Wool, R.P.: Nanoclay reinforced bio-based elastomers: synthesis and characterization. Polymer 47, 8106–8115 (2006)
Alexandre, M., Dubois, P.: Polymer-layered silicate nanocomposites: preparation, properties and uses of a new class of materials. Mater. Sci. Eng. 28, 1–63 (2000)
Beyer, G.: Flame retardancy of nanocomposites based on organoclays and carbon nanotubes with aluminium trihydrate. Polym. Adv. Technol. 17, 218–225 (2006)
Frounchia, M., Dadbinb, S., Salehpoura, Z., Noferestia, M.: Gas barrier properties of PP/EPDM blend nanocomposites. J. Memb. Sci. 282, 142–148 (2006)
Thompson, M.R., Yeung, K.K.: Recyclability of a layered silicate-thermoplastic olefin elastomers nanocomposite. Polym. Deg. Stab. 91, 2396–2407 (2006)
Chung, J.W., Han, S.J., Kwak, S.-Y.: Application of strain-time correspondence as a tool for structural analysis of acrylonitrile–butadiene copolymer nanocomposites with various organoclay loadings. Eur. Polym. J. 45, 79–87 (2009)
Ramorino, G., Bignotti, F., Pandini, S., Riccó, T.: Mechanical reinforcement in natural rubber/organoclay nanocomposites. Compos. Sci. Technol. 69, 1206–1211 (2009)
TABER® Rotary Platform Abraser: http://www.taberindustries.com/Products/abraser/index.asp?ct=1&sc=1
Jacobs, O., Jaskulkaa, R., Yangb, F., Wub, W.: Sliding wear of epoxy compounds against different counterparts under dry and aqueous conditions. Wear 256, 9–15 (2004)
Jacobs, O., Xu, W., Schädel, B., Wu, W.: Wear behaviour of carbon nanotube reinforced epoxy resin composites. Tribol. Lett. 23, 65–75 (2006)
Felhös, D., Karger-Kocsis, J., Xu, D.: Tribological testing of peroxide cured HNBR with different MWCNT and silica contents under dry sliding and rolling conditions against steel. J. Appl. Polym. Sci. 108, 2840–2851 (2008)
El-Tayeb, N.S.M., RMd, Nasir: Effect of soft carbon black on tribology of deproteinised and polyisoprene rubbers. Wear 262, 350–361 (2007)
Karger-Kocsis, J., Mousa, A., Major, Z., Békési, N.: Dry friction and sliding wear of EPDM rubbers against steel as a function of carbon black content. Wear 264, 357–365 (2008)
Schallamach, A.: Friction and abrasion of rubber. Wear 1, 384–417 (1958)
Schallamach, A.: How does rubber slide? Wear 17, 301–3012 (1971)
Xu, D., Karger-Kocsis, J.: Dry rolling and sliding friction and wear of organophilic layered silicate/hydrogenated nitrile rubber nanocomposite. J. Mater. Sci. 45, 1293–1298 (2010)
Gatos, K.G., Kameo, K., Karger-Kocsis, J.: On the friction and sliding wear of rubber/layered silicate nanocomposites. Exp. Polym. Lett. 1, 27–31 (2007)
Karger-Kocsis, J., Felhös, D., Xu, D., Schlarb, A.K.: Unlubricted sliding and rolling wear of thermoplastic dynamic vulcanizates (Santoprene®) against steel. Wear 265, 292–300 (2008)
Greenwood, J.A., Tabor, D.: Deformation properties of friction junctions. Proc. Phys. Soc. Lond. B 68, 609–619 (1955)
Greenwood, J.A., Tabor, D.: The friction of hard sliders on lubricated rubber: the importance of deformation losses. Proc. Phys. Soc. 71, 989–1001 (1958)
Greenwood, J.A., Minshall, H., Tabor, D.: Hysteresis losses in rolling and sliding friction. Proc. Phys. Soc. Lon. A Math. Phys. Sci 259, 480–507 (1961)
Tabor, D.: The mechanism of rolling friction. 2. The elastic range. Proc. Phys. Soc. Lon. A Math. Phys. Sci 229, 198–220 (1955)
Evans, I.: The rolling resistance of a wheel with a solid rubber tyre. Br. J. Appl. Phys. 5, 187–188 (1954)
May, W.D., Morris, E.L., Atack, D.: Rolling friction of a hard cylinder over a viscoelastic material. J. Appl. Phys. 30, 1713–1724 (1959)
Flom, D.G., Bueche, A.M.: Theory of rolling friction for spheres. J. Appl. Phys. 30, 1725–1730 (1959)
Gent, A.N., Henry, R.L.: Rolling friction on viscoelastic substrates. T. Soc. Rheol. 13, 255–271 (1969)
Zaghzi, N., Carre, A., Shanahan, M.E.R., Papirer, E., Schultz, J.: A study of spontaneous rubber/metal adhesion. I. The rolling cylinder test. J. Polym. Sci. B Polym. Phys. 25, 2393–2402 (1987)
Chernyak, Y.B., Leonov, A.I.: On the theory of the adhesive friction of elastomers. Wear 108, 105–138 (1986)
Glaeser, W.A.: Wear debris classification. In: Bhushan, B. (ed.) Modern Tribology Handbook, vol. 1. CRC Press, Boca Raton (2001)
Xu, D., Karger-Kocsis, J., Schlarb, A.K.: Rolling wear of EPDM and SBR rubbers as a function of carbon black contents: correlation with microhardness. J. Mater. Sci. 43, 4330–4339 (2008)
Felhös, D., Karger-Kocsis, J.: Tribological testing of peroxide-cured EPDM rubbers with different carbon black contents under dry sliding conditions against steel. Tribol. Int. 41, 404–415 (2008)
Xu, D., Karger-Kocsis, J., Schlarb, A.K.: Friction and wear of HNBR with different fillers under dry sliding and rolling conditions. Exp. Polym. Lett. 3, 126–136 (2009)
Xu, D., Karger-Kocsis, J., Major, Z., Thomann, R.: Unlubricated rolling wear of HNBR/FKM/MWCNT compounds against steel. J. Appl. Polym. Sci. 112, 1461–1470 (2009)
Xu, D., Karger-Kocsis, J., Schlarb, A.K.: Rolling friction and wear of organoclay-modified thermoplastic polyurethane rubbers against steel. Kaut. Gummi. Kunstst. 61, 98–106 (2008)
Acknowledgments
Dr. Dávid Felhös is very thankful to Mr. György Szabó and his family their selfless and friendly advocacy to take a fresh start in Miskolc. The authors express their thanks to Dr. Dan Xu for the performed tests and for the results presented in Sects. 2.3.1 and 2.3.2 and to Dr. Kálmán Marossy for the preparation of the TPU and TPO based nanocomposites.
Author information
Authors and Affiliations
Corresponding author
Editor information
Editors and Affiliations
Rights and permissions
Copyright information
© 2011 Springer-Verlag Berlin Heidelberg
About this chapter
Cite this chapter
Felhös, D., Karger-Kocsis, J. (2011). Friction and Wear of Rubber Nanocomposites Containing Layered Silicates and Carbon Nanotubes. In: Mittal, V., Kim, J., Pal, K. (eds) Recent Advances in Elastomeric Nanocomposites. Advanced Structured Materials, vol 9. Springer, Berlin, Heidelberg. https://doi.org/10.1007/978-3-642-15787-5_13
Download citation
DOI: https://doi.org/10.1007/978-3-642-15787-5_13
Published:
Publisher Name: Springer, Berlin, Heidelberg
Print ISBN: 978-3-642-15786-8
Online ISBN: 978-3-642-15787-5
eBook Packages: Chemistry and Materials ScienceChemistry and Material Science (R0)