Introduction
This book lights out the different improvement of the recent history of fuzzy logic. The present chapter deals with the connections that exist between fuzzy logic and production scheduling.
Production scheduling is a part of operational research which relies on combinatorial optimization solved by discrete methods. This large area covers several well-known combinatorial problems: vehicle routing problem (in which several vehicle must visit customers at once), scheduling problem [18] (explained in section 2 of this chapter), bin-packing problem (where piece must be placed in a rectangle), assignment problem (where piece must be assign to machine while optimizing a criterion). These short number of both theoretical and practical problems are persistent in numerous technical areas: transportation (flights, trucks, ships, auto-guided-vehicles), shop scheduling, surgery operating theater, layout of warehouse, landing/takeoff runway scheduling, timetable.
Access this chapter
Tax calculation will be finalised at checkout
Purchases are for personal use only
Preview
Unable to display preview. Download preview PDF.
References
Allet, S.: Handling flexibility in a generalised job shop with a fuzzy approach. European Journal of Operational Research 147(2), 312–333 (2003)
Widmer, M., Bugnon, B., Stoffel, K.: Fun: A dynamic method for scheduling problems. European Journal of Operational Research 83, 271–282 (1995)
Bertel, S., Billaut, J.-C.: A genetic algorithm for an industrial multiprocessor flow shop scheduling problem with recirculation. European Journal of Operational Research 159(3), 651–662 (2004)
Chan, F.T.S., Kazerooni, A., Abhary, K.: A fuzzy approach to operation selection. Engineering Applications of Artificial Intelligence 10(4), 345–356 (1997)
Chen, J.: A branch and bound procedure for the reentrant permutation flow-shop scheduling problem. International Journal of Advanced Manufacturing Technology 29(11-12), 1186–1193 (2006)
Chen, J.C., Chen, K.H., Wu, J.J., Chen, C.W.: A study of the flexible job shop scheduling problem with parallel machines and reentrant process. International Journal of Advanced Manufacturing Technology 39(3-4), 344–354 (2008)
Chen, J.-S., Pan, J.C.-H., Wu, C.-K.: Minimizing makespan in reentrant flow-shops using hybrid tabu search. The International Journal of Advanced Manufacturing Technology 34(3), 353–361 (2007)
Choi, S., Kim, Y., Lee, G.: Minimizing total tardiness of orders with reentrant lots in a hybrid flowshop. International Journal of Production Research 43(11), 2149–2167 (2005)
Choi, S.W., Kim, H.Y., Lee, D.H., Yoon, J., Yun, C.Y., Chae, K.B.: Scheduling algorithms for two-stage re-entrant hybrid flow shops: minimizing makespan under the maximum allowable due dates. International Journal of advanced Manufacturing Technology (2008), doi:10.1007/s00170-008-1656-5
Coffin, M.A., Taylor, B.W.: Multiple criteria R & D project selection and scheduling using fuzzy logic. Computers & Operations Research 23(3), 207–220 (1996)
Deb, K., Pratap, A., Agarwal, S., Meyarivan, T.: A fast and elitist multi-objective genetic algorithm: NSGA-II. IEEE Transactions on Evolutionary Computation 6(2), 182–197 (2002)
Demirkol, E., Uzsoy, R.: Decomposition methods for re-entrant flow shops with sequence-dependent setup times. Journal of Scheduling 3(3), 155–177 (2000)
Dhaenens, C., Lemesre, J., Talbi, E.G.: K-ppm: A new exact method to solve multi-objective combinatorial optimization problems. European Journal of Operational Research (2009) (in press)
Dorigo, M., Gambardella, L.M.: Ant colony system: A cooperative learning approach to the traveling salesman problem. IEEE Transactions on Evolutionary Computation 1(1), 53–66 (1997)
Drobouchevitch, I.G., Strusevich, V.A.: A heuristic algorithm for two-machines re-entrant shop scheduling. Annals of Operation Research 86, 417–439 (1999)
Dugardin, F., Amodeo, L., Yalaoui, F.: Méthodes multi-objectif pour l’ordonancement de lignes réentrantes. Journal of decision system, 231–255 (2008)
Dugardin, F., Amodeo, L., Yalaoui, F.: Multiobjective scheduling of a reentrant hybrid flowshop. In: 39th International Conference on Computers & Industrial Engineering (CIE39), pp. 193–198 (2009)
Dugardin, F., Chehade, H., Amodeo, L., Yalaoui, F., Prins, C.: Hybrid Job Shop and parallel machine scheduling problems: minimization of total tardiness criterion. Advanced Robotic System Journal, ch.16, 273–292 (2007) ISBN: 978-3-902613-02-8
Dugardin, F., Yalaoui, F., Amodeo, L.: Reentrant lines scheduling and lorenz dominance: a comparative study. In: Computational Intelligence in decision and control (Proceedings of the 8th International FLINS Conference), pp. 707–712 (2008) ISBN 978-981-279-946-3
Dugardin, F., Yalaoui, F., Amodeo, L.: New multiobjective method to solve reentrant hybrid flow shop scheduling problem. European Journal of Operational Research (2009) (available online)
Glover, F., Laguna, M.: Tabu search. In: Reeves, C. (ed.) Modern Heuristic Techniques for Combinatorial Problems, Oxford, England. Blackwell Scientific Publishing, Malden (1993)
Goldberg, D.E.: Genetic algorithms and rule learning in dynamic system control. In: Proc. of the International Conference on Genetic Algorithms and Their Applications, Pittsburgh, PA, pp. 8–15 (1985)
Grabot, B., Blanc, J.-C., Binda, C.: A decision support system for production activity control. Decision Support Systems 16(2), 87–101 (1996)
Graves, S.C., Meal, H.C., Stefek, D., Hamid, A.: Scheduling of re-entrant flow shop. Journal of Operations Management 3(4), 197–207 (1983)
Gupta, A.K., Sivakumar, A.I.: Conjunctive simulated scheduling. International Journal of Advanced Manufacturing Technology 26(11), 1409–1413 (2005)
Gupta, A.K., Sivakumar, A.I.: Job shop scheduling techniques in semi conductor manufacturing. International Journal of Advanced Manufacturing Technologies 27, 1163–1169 (2006)
Hsieh, B.-W., Chen, C.-H., Chang, S.-C.: Efficient simulation-based composition of scheduling policies by integrating ordinal optimization with design of experiment. IEEE Transactions on Automation Science and Engineering 4(4), 553–568 (2007)
Hwang, H., Sun, J.U.: Production sequencing problem with re-entrant work flows and sequence dependent setup times. International Journal of Production Research 36(9), 2435–2450 (1998)
Johnson, S.M.: Optimal two- and three-stage production schedules with set up times included. Nav. Res. Logistics Q 1(9), 61–68 (1954)
Kang, Y.-H., Kim, S.-S., Shin, H.J.: A scheduling algorithm for the reentrant shop: an application in semiconductor manufacture. The International Journal of Advanced Manufacturing Technology 35(5), 566–574 (2007)
Kennedy, J., Eberhart, R.: Particle swarm optimization. In: IEEE Int. Conf. on Neural Networks, pp. 1942–1948 (1995)
Koole, G., Pot, A.: Workload minimization in re-entrant lines. European Journal of Operational Research 174, 216–233 (2006)
Kubiak, W., Lou, S.X.C., Wang, Y.: Mean flow time minimization in re-entrant job-shops with a hub. Operations Research 44(5), 764–776 (1996)
Lau, H.C.W., Chan, T.M., Tsui, W.T., Ho, G.T.S.: Cost optimization of the supply chain network using genetic algorithms. IEEE Transactions on Knowledge and Data Engineering 99(1) (2009)
Lu, S.C.H., Ramaswamy, D., Kumar, P.R.: Efficient scheduling policies to reduce mean and variance of cycle-time in semi conductor manufacturing plants. IEEE Transactions on Semiconductor Manufacturing 7(3), 374–388 (1994)
Manikas, A., Chang, Y.L.: Multi-criteria sequence-dependent job shop scheduling using genetic algorithms. Computers and Industrial Engineering 56(1), 179–185 (2008)
Miragliotta, G., Perona, M.: Decentralised, multi-objective driven scheduling for reentrant shops: A conceptual development and a test case. European Journal of Operational Research 167(3), 644–662 (2005)
Mohammadi, G., Ozbayrak, M.: Scheduling mixed-model final assembly lines in jit manufacturing. International Journal of Computer Integrated Manufacturing 4(6), 377–382 (2006)
Mönch, L., Drieel, R.: A distributed shifting bottleneck heuristic for complex job shops. Computers and Industrial Engineering 49(3), 363–380 (2005)
Mönch, L., Schabacker, R., Pabst, D., Fowler, J.W.: Genetic algorithm-based subproblem solution procedures for a modified shifting bottleneck heuristic for complex job shops. European Journal of Operational Research 177(3), 2100–2118 (2007)
Nawaz, M., Enscore, E.E., Ham, I.: A heuristic algorithm for the m-machine, n-job flow-shop scheduling problem. Omega 11(5), 91–95 (1983)
Ovacik, I.M., Uzsoy, R.: Exploiting shop stage status information to schedule complex job shops. Journal Manufacturing System 13, 73–84 (1994)
Pan, J.C.-H., Chen, J.-S.: A comparative study of schedule generation procedures for the re-entrant shops. International Journal of Industrial Engineering - Theory, Applications and Practice 11(4), 313–321 (2004)
Pan, J.C.-H., Chen, J.-S.: Mixed binary integer programming formulations for the reentrant job shop scheduling problem. Computer and Operations Research 32, 1197–1212 (2005)
Pearn, W.L., Chung, S.H., Yang, M.H., Shiao, K.P.: Solution strategies for multi-stage wafer probing scheduling problem with reentry. Journal of the Operational Research Society 59(5), 637–651 (2008)
Riise, A.: Comparing genetic algorithms and tabu search for multi-objective optimization. In: IFORS, Abstract conference proceedings, p. 29 (2002)
Slany, W.: Scheduling as a fuzzy multiple criteria optimization problem. Fuzzy Sets and Systems 78(2), 197–222 (1996)
Suhail, A., Khan, Z.A.: Fuzzy production control with limited resources and response delay. Computers & Industrial Engineering 56(1), 433–443 (2009)
Wang, M.Y., Sethi, S.P., Van De Velde, S.L.: Minimizing makespan in a class of re-entrant shops. Operation Research 45, 702–712 (1997)
Wang, Z., Qiao, F., Wu, Q.: A new compound priority control strategy in semiconductor wafer fabrication. Networking, Sensing and Control, 80–83 (2005)
Yalaoui, F., Chu, C.: New exact method to solve the pm/r j /∑ C j schedule problem. International Journal of Production Economics 100(1), 168–179 (2006)
Yalaoui, N., Amodeo, L., Mahdi, H., Yalaoui, F.: Hybrid method to solve a facility layout problem: Genetic algorithm - particle swarm optimization. In: 13 th IFAC on Information Control Problems in Manufacturing, INCOM 2009 (2009) (DVD-rom)
Yang, D.-L., Kuo, W.-H., Chern, M.-S.: Multi-family scheduling in a two-machine reentrant flow shop with setups. European Journal of Operational Research 187(3), 1160–1170 (2008)
Zadeh, L.A.: Fuzzy sets. Information and Control 8(3), 338–353 (1965)
Zitzler, E., Laumanns, M., Thiele, L.: SPEA2: Improving the Strength Pareto Evolutionary Algorithm. Technical Report 103, Computer Engineering and Networks Laboratory (TIK), ETH Zurich, Zurich, Switzerland (2001)
Zitzler, E., Thiele, L.: Multi objective evolutionary algorithms: a comparative study and strength pareto approach. IEEE Transaction on Evolutionary Computation 3(2), 257–271 (1999)
Author information
Authors and Affiliations
Editor information
Editors and Affiliations
Rights and permissions
Copyright information
© 2010 Springer-Verlag Berlin Heidelberg
About this chapter
Cite this chapter
Yalaoui, N., Dugardin, F., Yalaoui, F., Amodeo, L., Mahdi, H. (2010). Fuzzy Project Scheduling. In: Kahraman, C., Yavuz, M. (eds) Production Engineering and Management under Fuzziness. Studies in Fuzziness and Soft Computing, vol 252. Springer, Berlin, Heidelberg. https://doi.org/10.1007/978-3-642-12052-7_8
Download citation
DOI: https://doi.org/10.1007/978-3-642-12052-7_8
Publisher Name: Springer, Berlin, Heidelberg
Print ISBN: 978-3-642-12051-0
Online ISBN: 978-3-642-12052-7
eBook Packages: EngineeringEngineering (R0)