Abstract
The chapter “Advanced Applications of CAD/EDM in the Automotive Industry”, offers a selection of concrete use cases in automotive development. One use case includes an application of knowledge-based EDM, which highlights the importance of the interaction of knowledge processes and data management throughout virtual product development. This use case also describes the integrated application of computer-aided design, simulation and management throughout the daily operations of development processes. Another use case describes the integration of CAD data management in automotive engineering, which is an essential topic in the area of engineering data management. Finally, a use case describing an approach of a parametric-associative concept model for initial vehicle development highlights the various working fields involved in automotive concept phases and introduces a model for geometrical and functional integration.
Access this chapter
Tax calculation will be finalised at checkout
Purchases are for personal use only
References
Hirz, M.: An approach of multi disciplinary collaboration in conceptual automotive development. Int. J. Collaborative Enterp. 2(1), 39–56 (2011)
GCIE: Global Cars Manufacturers Information Exchange Group, Model Year (2008)
Nelsen, M.: FCM - Fast Concept Modeller. Product Presentation (2009)
International Organization for Standardization: Road vehicles - Functional safety. ISO 26262 (2009)
Hänschke, A., Kramer, F., Kondzilla, R., Wollert, W.: Das rechnergestützte Entwicklungssystem für Fahrzeuge AURORA. VDI-Berichte 613 (1986)
Heinke, O., Kondziella, R., Appel, H.: Variable Konzeptentwicklung mit einem Fahrzeugentwurfsystem. VDI-Berichte 968 (1992)
Deter, T., Oertel, C.: Einsatz eines Entwurfssystems beim Entwicklungsprozeß des Automobils. ATZ Automobiltechnische Zeitschrift 97 (1995)
Zimmer, H., Hövelmann, A., Frodl, B., Hänle, U., et al.: Entwurfstool zur Generierung parametrischer, virtueller Prototypen im Fahrzeugbau. VDI-Berichte 1559 (2000)
Bulheller, K.: Das Produktmodell als Kommunikationsbasis im Entwicklungsverbund. VDI-Berichte 1148 (1994)
Rasenack, W.: Parametervariation als Hilfsmittel bei der Entwicklung eines Parameter-Package, vol. D 83. Offset-Druckerei Gerhard Weinert, Berlin (1998)
Gessner, K.: Package-Feature für die Kommunikation in der frühen Phase der Automobilentwicklung. Fraunhofer IPK/IRB (2001)
Forsen, J.: Ein systemtechnischer Ansatz zur methodischen parametrisch-assoziativen Konstruktion am Beispiel von Karosseriebauteilen. Shaker, Aachen (2003)
Dassault Systems: CATIA V6. Date of access: 2009–11-10. http://www.3ds.com/products/catia
Potthoff, J.: CAVA: Fahrzeugauslegung mit CATIA V5 unter Berücksichtigung gesetzlicher Vorgaben und Richtlinien. Die digitale Produktentwicklung 1148 (2008)
Tesch, F.: Strukturvariabilität: Ableitung von Derivaten in Produktfamilien mit CATIA V5 in frühen Phasen. Die digitale Produktentwicklung 1148 (2008)
Nikol, B.: Definition von Auslegungsmethoden durch Standardisierung von V5-Tools in der Audi-Konzeptentwicklung. Die digitale Produktentwicklung II 1148 (2010)
Meyer, B.: Objektorientierte Softwareprogrammierung. Hanser, München (1990)
Transcat: CAVA - CATIA V5 Automotive Extensions Vehicle Architecture. date of access: 2008–11-14. http://www.transcat-plm.com
SFE - SOLUTIONS FOR EXCELLENCE, Gesellschaft für Strukturanalyse in Forschung und Entwicklung mbH/SFE CONCEPT: date of access: 2010–07-01. http://www.sfe-berlin.de
Dietrich, W., Hirz, M., Rossbacher, P.: Integration von geometrischen und funktionalen Aspekten in die parametrisch assoziative Modellgestaltung in der konzeptionellen Automobilentwicklung. In: 3. Grazer Symposium Virtuelles Fahrzeug, Graz (2010)
Dietrich, W.: Zur prozessorientierten Integration von Wissensmanagement in das Engineering Data Management. Phd Thesis, Graz University of Technology, Graz (2010)
Open Access
This article is distributed under the terms of the Creative Commons Attribution License which permits any use, distribution, and reproduction in any medium, provided the original author(s) and the source are credited.
Author information
Authors and Affiliations
Corresponding author
Rights and permissions
Copyright information
© 2013 Springer-Verlag Berlin Heidelberg
About this chapter
Cite this chapter
Hirz, M., Dietrich, W., Gfrerrer, A., Lang, J. (2013). Advanced Applications of CAD/EDM in the Automotive Industry. In: Integrated Computer-Aided Design in Automotive Development. Springer, Berlin, Heidelberg. https://doi.org/10.1007/978-3-642-11940-8_9
Download citation
DOI: https://doi.org/10.1007/978-3-642-11940-8_9
Published:
Publisher Name: Springer, Berlin, Heidelberg
Print ISBN: 978-3-642-11939-2
Online ISBN: 978-3-642-11940-8
eBook Packages: EngineeringEngineering (R0)