Abstract
The following chapter provides an overviewon laser basedmicroprocessing in different industrial applications. Depending on the used parameter regime, the systems technology and optics and the laser source applications like drilling, precise cutting, marking, or microjoining can be realized. Besides describing the specific laser material interaction and their influence by the laser parameters the main industrial applications will be highlighted.
Access this chapter
Tax calculation will be finalised at checkout
Purchases are for personal use only
Preview
Unable to display preview. Download preview PDF.
References
B.N. Chichkov, C. Momma, S. Nolte, F. von Alvensleben, A. Tünnermann, Appl. Phys. A 63, 109 (1996)
D. Bäuerle, Laser Processing and Chemistry. (Springer, Berlin, 2000)
A. Ruf, Modellierung des Perkussionsbohrens von Metallen mit kurz- und ultrakurzgepulsten Lasern Ph.D. thesis, Universitaet Stuttgart, 2004
F. Siegel, U. Klug, R. Kling, A. Ostendorf, in Proceedings of LPM2008-the 9th Symposium on Laser Precision Microfabrication, 2008
S. Sommer, F. Dausinger, in Proceedings of LPM2008-the 9th International Symposium on Laser Precision Microfabrication, 2008
D. Breitling, A. Ruf, F. Dausinger: in Proceedings of SPIE, vol. 5339.
T.V. Kononenko, S.M. Klimentov, V.I. Konov, F. Dausinger, Proc. SPIE 6161, 1 (2005)
A. Ancona, F. Röser, K. Rademaker, J. Limpert, S. Nolte, A. Tünnermann, Opt. Express 16(12), 8958 (2008)
M. von Allmen, J. Appl. Phys. 47, 5460 (1976)
M. Geiger, H. Hügel, E. Tönshoff (eds.), Präzisionsabtragen mit Lasern: VDI-Technologiezentrum Physikalische Technologien (2000)
L. Trippe, J.Willach, E.W. Kreutz, W. Schultz, J. Petereit, S. Kaierle, R. Proprawe, Proc. SPIE 5662, 609 (2004)
X. Liu, Proc. SPIE 5713 (2006)
E.W. Kreutz, L. Trippe, K. Walther, R. Poprawe, Proceedings of the 4th International Congress on laser advanced materials Processing, pp. 1–5
G. Kamlage, T. Bauer, A. Ostendorf, B. Chichkov, Appl. Phys. A 77, 307–310 (2003)
C. Föhl, F. Dausinger, in International symposium on laser precision microfabrication No. 4, Munich, Germany, 2003
S. Nolte, C. Momma, G. Kamlage, A. Ostendorf, C. Fallnich, F. von Alvensleben, H. Welling, J. Appl. Phys. A 68, 563 (1999)
T. Kononenko, S. Garnov, S. Klimentov, V. Kononov, E. Loubnin, F. Dausinger, A. Raiber, C. Taut, Appl. Surf. Sci. 109/110, 48 (1997)
E. Akman, L. Candan, T. Canel, A. Demir, E. Kacar, LPM, 2008, pp. 1–4
C. Hartmann, A. Gillner, in ICALEO Conrgress Proceedings (2007)
R. Le Harzic, D. Breitling, S. Sommer, C. Föhl, F. Dausinger, E. Audouard, Appl. Phys. A Mater. Sci. Process. 81, 1121 (2005)
B. Campbell, T. Lehecka, V. Semak, J. Thomas, in ICALEO 2007 Congress Proceedings (2007)
O. Suttmann, B. Wojakowski, U. Klug, R. Kling, A. Ostendorf, in ICALEO 2008 Congress Proceedings (2008)
W. Schulz, C. Hertzler
X. Wang, J.D. Shephard, F.C. Dear, D.P. Hand, in Proceeedings of the 4th International Congress on Laser Advanced Materials Processing
O. Haupt, F. Siegel, A. Schoonderbeek, L. Richter, R. Kling, A. Ostendorf, in Proceedings of LPM2008 – the 9th International Symposium on Laser Precision Microfabrication (2008)
C. Momma, U. Knop, S. Nolte, 39 (1999)
J.M. Liu, Opt. Lett. 7(5), 196 (1982)
U. Klug, B. Kamlage-Rahn, J. Koch, R. Knappe, U. Stute, B. Chichkov, in ICALEO Congress Proceedings (2006)
H. Niino, Y. Kawaguchi, T. Sato, A. Narazaki, R. Kurasaki, in Proceedings of LPM2008-the 9th International Symposium on Laser Precision Microfabrication (2008)
K. Yamamoto, N. Hasaka, H. Morita, E. Ohmura, in Proceedings of LPM2008-the 9th International Symposium on Laser Precision Microfabrication (2008)
P. Engelhart, S. Hermann, T. Neubert, H. Plagwitz, R. Grischke, R. Meyer, U. Klug, A. Schoonderbeek, U. Stute, R. Brendel, Prog. Photovolt. Res. Appl. 15(6), 521 (2007)
S. Amorosi, T. Sidler, R.P. Salathé, H.P. Schwob, J. Hertzberg, J. Laser Appl. 16, 134 (2004)
F. Otte, A. Ostendorf, U. Stute, T. Stehr, in Proceedings of SPIE, Vol.6458645804-1, San Jose, California, USA, 2007
F. Bachmann, U. Russek, 5121, 385 (2002)
K. Richter, U. Reisgen, W. Behr, R. Holtz, J. Laser Appl. 19, 116 (2007)
R. T. Brown, J. Laser Appl. 20, 201 (2008)
N. Abe, Y. Funada, T. Imanaka, M. Tsukamoto, Trans. JWRI 34, 19 (2005)
A. Gillner, A. Olowinsky, K. Klages, J. Gedicke, F. Sari, International Conference on Lasers, Applications, and Technologies 2005: Laser-Assisted Micro- and Nanotechnologies, vol. 6161, 2006, p. 616102
Olsen, Kaplan, Laser cutting and marking. EuroLaser Academy (1997)
B. Gu, R. Schramm, J. Gillespie, G. Mezack, A. Cunningham, in IMAPS (2003)
J. Ocańa, M. Morales, C. Molpeceres, O. García, J. Porro, J. García-Ballesteros, Appl. Surf. Sci. (2007)
M. Schmidt, M. Dirscherl, M. Rank, M. Zimmermann, J. Laser Appl. 19, 124 (2007)
Author information
Authors and Affiliations
Corresponding author
Editor information
Editors and Affiliations
Rights and permissions
Copyright information
© 2010 Springer-Verlag Berlin Heidelberg
About this chapter
Cite this chapter
Suttmann, O., Moalem, A., Kling, R., Ostendorf, A. (2010). Drilling, Cutting, Welding, Marking and Microforming. In: Sugioka, K., Meunier, M., Piqué, A. (eds) Laser Precision Microfabrication. Springer Series in Materials Science, vol 135. Springer, Berlin, Heidelberg. https://doi.org/10.1007/978-3-642-10523-4_13
Download citation
DOI: https://doi.org/10.1007/978-3-642-10523-4_13
Published:
Publisher Name: Springer, Berlin, Heidelberg
Print ISBN: 978-3-642-10522-7
Online ISBN: 978-3-642-10523-4
eBook Packages: Physics and AstronomyPhysics and Astronomy (R0)