Summary
The elastic mechanical properties of one-dimensional nanostructures are considered, with an emphasis on the use of contact-resonance atomic force microscopy methods to determine elastic moduli. Various methods used to determine elastic moduli of one-dimensional nanostructures are reviewed before detailed consideration of the experimental and analytical methods used in contact-resonance atomic force microscopy As direct applications of contact-resonance atomic force microscopy on one-dimensional nanostructures, two measurement examples are shown here, for ZnO and Te nanowires. The variations of the elastic moduli of ZnO and Te nanowires with nanowire diameter are presented and interpreted in terms of core–shell models of nanowire structure. Based on combined theoretical, atomistic simulation, and experimental results, the importance of accurate and precise methods for measuring the mechanical properties of nanostructures, and how those methods need to be adjusted for one-dimensional nanostructures, is emphasized.
Access this chapter
Tax calculation will be finalised at checkout
Purchases are for personal use only
Preview
Unable to display preview. Download preview PDF.
References
M.S. Dresselhaus, Carbon nanotubes-Introduction. J. Mater. Res. 13, 2355–2356 (1998)
C.R. Welch, W.F. Marcuson, I. Adiguzel,Will supermolecules and supercomputers lead to super construction materials? Civil Eng. 78, 42–52 (2008)
O. Lourie, H.D. Wagner, Evaluation of Young’s modulus of carbon nanotubes by micro-Raman spectroscopy. J. Mater. Res. 13, 2418–2422 (1998)
R. Tenne, P.M. Ajayan, Z.L. Wang, Y. Li, P. Yang, Foreword. J. Mater. Res. 21, 2709–2710 (2006)
P. Poncharal, Z.L. Wang, D. Ugarte, W.A. de Heer, Electrostatic deflections and electromechanical resonances of carbon nanotubes. Science 283, 1513–1516 (1999)
L. Gao, Z.L. Wang, Z. Bai, W.A. de Heer, L. Dai, M. Gao, Nanomechanics of individual carbon nanotubes from pyrolytically grown arrays. Phys. Rev. Lett. 85, 622–625 (2000)
Z.L. Wang, Z.R. Dai, R.P. Gao, Z.G. Bai, J.L. Gole, Side-by-side silicon carbide–silica biaxial nanowires: Synthesis, structure, and mechanical properties. Appl. Phys. Lett. 77, 3349–3351 (2000)
X.D. Bai, P.X. Gao, Z.L. Wang, E.G. Wang, Dual-mode mechanical resonance of individual ZnO nanobelts. Appl. Phys. Lett. 82, 4806–4808 (2003)
P. Jaroenapibal, D.E. Luzzi, S. Evoya, S. Arepalli, Transmission-electron-microscopic studies of mechanical properties of single-walled carbon nanotube bundles. Appl. Phys. Lett. 85, 4328–4300 (2004)
C.Q. Chen, Y. Shi, Y.S. Zhang, J. Zhu, Y.J. Yan, Size dependence of Young’s modulus in ZnO nanowires. Phys. Rev. Lett. 96, 075505 (2006)
X.L. Wei, Y. Liu, Q. Chen, M.S. Wang, L.M. Peng, The very low shear modulus of multi-walled carbon nanotubes determined simultaneously with the axial Young’s modulus via in situ experiments. Adv. Funct. Mater. 18, 1555–1562 (2008)
D.A. Dikin, X. Chen, W. Ding, G. Wagner, R.S. Ruoff, Resonance vibration of amorphous SiO2 nanowires driven by mechanical or electrical field excitation. J. Appl. Phys. 93, 226–230 (2003)
M.F. Yu, O. Lourie, M.J. Dyer, K. Moloni, T.F. Kelly, R.S. Ruoff, Strength and breaking mechanism of multiwalled carbon nanotubes under tensile load. Science 287, 637–640 (2000)
Y. Zhu, H.D. Espinosa, An electromechanical material testing system for in situ electron microscopy and applications. Proc. Natl. Acad. Sci. USA 102, 14503–14508 (2005)
H.D. Espinosa, Y. Zhu, N. Moldovan, Design and operation of a MEMS-based material testing system for nanomechanical characterization. J. Microelectromech. Syst. 16, 1219–1231 (2007)
Z.W. Pan, S.S. Xie, L. Lu, B.H. Chang, L.F. Sun, W.Y. Zhou, G. Wang, D.L. Zhang, Tensile tests of ropes of very long aligned multiwall carbon nanotubes. Appl. Phys. Lett. 74, 3152–3154 (1999)
S. Hoffmann, F. Östlund, J. Michler, H.J. Fan, M. Zacharias, S.H. Christiansen, C. Ballif, Fracture strength and Young’s modulus of ZnO nanowires. Nanotechnology 18, 205503 (2007)
R. Agrawal, B. Peng, E.E. Gdoutos, H.D. Espinosa, Elasticity size effects in ZnO nanowires – a combined experimental-computational approach. Nano Lett. 8, 3668–3674 (2008)
J.P. Salvetat, A.J. Kulik, J.M. Bonard, G.A.D. Briggs, T. Stöckli, K. MĂ©tĂ©nier, S. Bonnamy, F. BĂ©guin, N.A. Burnham, L. ForrĂ³, Elastic modulus of ordered and disordered multiwalled carbon nanotubes. Adv. Mater. 11, 161–165 (1999)
A. Kis, D. Mihailovic, M. Remskar, A. Mrzel, A. Jesih, I. Piwonski, A.J. Kulik, W. Benoit, L. ForrĂ³, Shear and Young’s moduli for MoS2 nanotube ropes. Adv. Mater. 15, 733–736 (2003)
B. Wu, A. Heidelberg, J.J. Boland, Mechanical properties of ultrahigh-strength gold nanowires. Nat. Mater. 4, 525–529 (2005)
H. Ni, X. Li, H. Gao, Elastic modulus of amorphous SiO2 nanowires. Appl. Phys. Lett. 88, 043108 (2006)
Q. Xiong, N. Duarte, S. Tadigadapa, P.C. Eklund, Force-deflection spectroscopy: a new method to determine the Young’s modulus of nanofilaments. Nano Lett. 6, 1904–1909 (2006)
W. Mai, Z.L. Wang, Quantifying the elastic deformation behavior of bridged nanobelts. Appl. Phys. Lett. 89, 073112 (2006)
L.T. Ngo, D. Almécija, J.E. Sader, B. Daly, N. Petkov, J.D. Holmes, D. Erts, J.J. Boland, Ultimate-strength Germanium nanowires. Nano Lett. 6, 2964–2968 (2006)
B. Wu, A. Heidelberg, J.J. Boland, J.E. Sader, X. Sun, Y. Li, Microstructure-hardened silver nanowires. Nano Lett. 6, 468–472 (2006)
Y. Chen, I. Stevenson, R. Pouy, L. Wang, D.M. McIlroy, T. Pounds, M.G. Norton, D.E. Aston, Mechanical elasticity of vapour-liquid-solid grown GaN nanowires. Nanotechnology 18, 135708 (2007)
E.P.S. Tan, Y. Zhu, T. Yu, L. Dai, C.H. Sow, V.B.C. Tan, C.T. Lim, Crystalinity and surface effects on Young’s modulus of CuO nanowires. Appl. Phys. Lett. 90, 163112 (2007)
H. Zhang, J. Tang, L. Zhang, B. An, L.C. Qin, Atomic force microscopy measurement of the Young’s modulus and hardness of single LaB6 nanowires. Appl. Phys. Lett. 92, 173121 (2008)
B. Wen, J.E. Sader, J.J. Boland, Mechanical properties of ZnO nanowires. Phys. Rev. Lett. 101, 175502 (2008)
E.W. Wong, P.E. Sheehan, C.M. Lieber, Nanobeam mechanics: elasticity, strength, and toughness of nanorods and nanotubes. Science 277, 1971–1975 (1997)
J. Song, X. Wang, E. Riedo, Z.L. Wang, Elastic property of vertically aligned nanowires. Nano Lett. 5, 1954–1958 (2005)
Y.L. Chueh, L.J. Chou, J. Song, Z.L. Wang, Mechanical and magnetic properties of Ni-doped metallic TaSi2 nanowires. Nanotechnology 18, 145604 (2007)
X. Li, H. Gao, C.J. Murphy, K.K. Caswell, Nanoindentation of silver nanowires. Nano Lett. 3, 1495–1498 (2003)
G. Feng, W.D. Nix, Y. Yoon, C.J. Lee, A study of the mechanical properties of nanowires using nanoindentation. J. Appl. Phys. 99, 074304 (2006)
X. Li, X. Wang, Q. Xiong, P.C. Eklund, Mechanical properties of ZnS nanobelts. Nano Lett. 5, 1982–1986 (2005)
H. Ni, X. Li, Young’s modulus of ZnO nanobelts measured using atomic force microscopy and nanoindnetation techniques. Nanotechnology 17, 3591–3597 (2006)
X. Li, P. Nardi, C.W. Baek, J.M. Kim, Y.K. Kim, Direct nanomechanical machining of gold nanowires using a nanoindenter and an atomic force microscope. J. Micromech. Microeng. 15, 551–556 (2005)
S.J. Young, L.W. Ji, S.J. Chang, T.H. Fang, T.J. Hsueh, T.H. Meen, I.C. Chen, Nanoscale mechanical characteristics of vertical ZnO nanowires grown on ZnO:Ga/glass templates. Nanotechnology 18, 225603 (2007)
S. Cuenot, C. Frétigny, S. Demoustier-Champagne, B. Nysten, Surface tension effect on the mechanical properties of nanomaterials measured by atomic force microscopy. Phys. Rev. B 69, 165410 (2004)
G. Stan, C.V. Ciobanu, P.M. Parthangal, R.F. Cook, Diameter-dependent radial and tangential elastic moduli of ZnO nanowires. Nano Lett. 7, 3691–3697 (2007)
Y. Zheng, R.E. Geer, K. Dovidenko, M. Kopycinska-MĂ¼ller, D.C. Hurley, Quantitative nanoscale modulus measurements and elastic imaging of SnO2 nanobelts. J. Appl. Phys. 100, 124308 (2006)
L. Muthaswami, Y. Zheng, R. Vajtai, G. Shehkawat, P. Ajayan, R.E. Geer, Variation of radial elasticity in multiwalled carbon nanotubes. Nano Lett. 7, 3891–3894 (2007)
G. Stan, S. Krylyuk, A.V. Davydov, M. Vaudin, L.A. Bendersky, R.F. Cook, Surface effects on the elastic modulus of Te nanowires. Appl. Phys. Lett. 92, 241908 (2008)
G. Stan, C.V. Ciobanu, T.P. Thayer, G.T. Wang, J.R. Creighton, K.P. Purushotham, L.A. Bendersky, R.F. Cook, Elastic modulus of faceted aluminum nitride nanotubes measured by contact resonance atomic force microscopy. Nanotechnology 20, 035706 (2009)
G.Y. Jing, H.L. Duan, X.M. Sun, Z.S. Zhang, J. Xu, Y.D. Li, J.X. Wang, D.P. Yu, Surface effects on elastic properties of silver nanowires: contact atomic-force microscopy. Phys. Rev. B 73, 235409 (2006)
J.M. Gere, S.P. Timoshenko, Mechanics of Materials, 2nd edn. (PWS-KENT, Boston, MA, 1984)
V. Sazonova, Y. Yaish, H. ĂœstĂ¼nel, D. Roundy, T.A. Arias, P.L. McEuen, A tunable carbon nanotube electromechanical oscillator. Nature (London) 431, 284–287 (2004)
D. Garcia-Sanchez, A. San Paulo, M.J. Esplandiu, F. Perez-Murano, L. ForrĂ³, A. Aguasca, A. Bachtold, Mechanical detection of carbon nanotube resonator vibrations. Phys. Rev. Lett. 99, 085501 (2007)
D.J. Zeng, Q.S. Zheng, Resonant frequency-based method for measuring the Young’s modulus of nanowires. Phys. Rev. B 76, 075417 (2007)
P.E. Marszalek, W.J. Greenleaf, H. Li, A.F. Oberhauser, J.M. Fernandez, Atomic force microscopy captures quantized plastic deformation in gold nanowires. Proc. Natl. Acad. Sci. USA 97, 6282–6286 (2000)
J.P. Salvetat, G.A.D. Briggs, J.M. Bonard, R.R. Bacsa, A.J. Kulik, T. Stöckli, N.A. Burnham, L. ForrĂ³, Elastic and shear moduli of single-walled carbon nanotube ropes. Phys. Rev. Lett. 82, 944–947 (1999)
S. Hoffmann, I. Utke, B. Moser, J. Michler, S.H. Christiansen, V. Schmidt, S. Senz, P. Werner, U. Gösele, C. Ballif, Measurement of the bending strength of vapor-liquid-solid grown silicon nanowires. Nano Lett. 6, 622–625 (2006)
S.X. Mao, M. Zhao, Z.L. Wang, Nanoscale mechanical behavior of individual semiconducting nanobelts. Appl. Phys. Lett. 83, 993–995 (2003)
W.C. Oliver, G.M. Pharr, An improved technique for determining hardness and elastic modulus using load and displacement sensing indentation experiments. J. Mater. Res. 7, 1564–1583 (1992)
M.F. Yu, T. Kowalewski, R.S. Ruoff, Investigation of the radial deformability of individual carbon nanotubes under controlled indentation force. Phys. Rev. Lett. 85, 1456–1459 (2000)
L.W. Ji, S.J. Young, T.H. Fang, C.H. Liu, Buckling characterization of vertical ZnO nanowires using nanoindentation. Appl. Phys. Lett. 90, 033109 (2007)
U. Rabe, K. Janser, W. Arnold, Vibrations of free and surface-coupled atomic force microscope cantilevers: Theory and experiment. (1996) Rev. Sci. Instrum. 67, 3281–3293 (1996)
K. Yamanaka, S. Nakano, Ultrasonic atomic force microscopy with overtone excitation of cantilever. Jpn. J. Appl. Phys. 35, 3787–3792 (1996)
K. Yamanaka, H. Ogiso, O. Kolosov, Ultrasonic force microscopy for nanometer resolution subsurface imaging. Appl. Phys. Lett. 64, 178–180 (1994)
M.T. Cuberes, H.E. Assender, G.A.D. Briggs, O.K. Kolosov, Heterodyne force microscopy of PMMA/rubber nanocomposites: nanomapping of viscoelastic response at ultrasonic frequencies. J. Phys. D: Appl. Phys. 33, 2347–2355 (2000)
T. Drobek, R.W. Stark, W.M. Heckl, Determination of shear stiffness based on thermal noise analysis in atomic force microscopy: Passive overtone microscopy. Phys. Rev. B 64, 045401 (2001)
O. Sahin, S. Magonov, C. Su, C.F. Quate, O. Solgaard, An atomic force microscope tip designed to measure time-varying nanomechanical forces. Nature Nanotech. 2, 507–514 (2007)
U. Rabe, Atomic force acoustic microscopy, in Applied Scanning Probe Methods II, ed. by B. Bhushan, H. Fuchs (Springer, Berlin Heidelberg New York, 2006), pp. 37–90
D.C. Hurley, Contact resonance force microscopy techniques for nanomechanical measurements, in Applied Scanning Probe Methods XI., ed. by B. Bhushan, H. Fuchs (Springer, Berlin Heidelberg NewYork, 2009), pp. 97–138
U. Rabe, M. Kopycinska, S. Hirsekorn, J. Muñoz Saldaña, G.A. Schneider, W. Arnold, High-resolution characterization of piezoelectric ceramics by ultrasonic scanning force microscopy techniques. J. Phys. D: Appl. Phys. 35, 2621–2635 (2002)
M. Kopycinska-MĂ¼ller, R.H. Geiss, J. MĂ¼ller, D.C. Hurley, Elastic-property measurements of ultrathin films using atomic force acoustic microscopy. Nanotechnology 16:703–709 (2005)
D. Passeri, A. Bettucci, M. Germano, M. Rossi, A. Alippi, V. Sessa, A. Fiori, E. Tamburri, M.L. Terranova, Local indentation modulus characterization of diamondlike carbon films by atomic force acoustic microscopy two contact resonance frequencies imaging technique. Appl. Phys. Lett. 88, 121910 (2006)
D.C. Hurley, M. Kopycinska-MĂ¼ller, A.B. Kos, R.H. Geiss, Quantitative elastic-property measurements at the nanoscale with atomic force acoustic microscopy. Adv. Eng. Mater. 7, 713–718 (2005)
M. Prasad, M. Kopycinska, U. Rabe, W. Arnold, Measurement of Young’s modulus of clay minerals using atomic force acoustic microscopy. Geophys. Res. Lett. 29, 1172 (2002)
A. Kumar, U. Rabe, S. Hirsekorn, W. Arnold, Elasticity mapping of precipitates in polycrystalline materials using atomic force acoustic microscopy. Appl. Phys. Lett. 92, 183106 (2008)
U. Rabe, S. Amelio, M. Kopycinska, S. Hirsekorn, M. Kempf, A.W. Göken, Imaging and measurement of local mechanical properties by atomic force acoustic microscopy. Surf. Interface Anal. 33, 65–70 (2002)
D.C. Hurley, K. Shen, N.M. Jennett, J.A. Turner, Atomic force acoustic microscopy methods to determine thin-film elastic properties. J. Appl. Phys. 94, 2347–2354 (2003)
G. Stan, R.F. Cook, Mapping the elastic properties of granular Au films by contact resonance atomic force microscopy. Nanotechnology 19, 235701 (2008)
K.L. Johnson, Contact Mechanics (Cambridge University, Cambridge, 1985)
I.N. Sneddon, The relation between load and penetration in the axisymmetric boussinesq problem for a punch of arbitrary profile. Int. J. Eng. Sci. 3, 47–57 (1965)
J.J. Vlassak, W.D. Nix, Indentation modulus of elastically anisotropic half spaces. Phil. Mag. A 67, 1045–1056 (1993)
R.D. Mindlin, Compliance of elastic bodies in contact. J. Appl. Mech.16, 259–268 (1949)
D.C. Hurley, J.A. Turner, Measurement of Poisson’s ratio with contact-resonance atomic force microscopy. J. Appl. Phys. 102, 033509 (2007)
P.E. Mazeran, J.L. Loubet, Force modulation with a scanning force microscope: an analysis. Tribol. Lett. 3, 125–132 (1997)
G. Stan, W. Price, Quantitative measurements of indentation moduli by atomic force acoustic microscopy using a dual reference method. Rev. Sci. Instrum. 77, 103707 (2006)
I. Palaci, S. Fedrigo, H. Brune, C. Klinke, M. Chen, E. Riedo, Radial elasticity of multiwalled carbon nanotubes. Phys. Rev. Lett. 94, 175502 (2005)
G.M.L. Gladwell, Contact problems in the classical theory of elasticity, Sijthoff & Noordhoff (Alphen aan den Rijn, The Netherlands, 1980)
X. Wang, J. Song, Z.L. Wang, Nanowire and nanobelt arrays of zinc oxide from synthesis to properties and to novel devices. J. Mater. Chem. 17, 711–720 (2007)
R.W. Carpick, D.F. Ogletree, M. Salmeron, Lateral stiffness: A new nanomechanical measurement for the determination of shear strengths with friction force microscopy. Appl. Phys. Lett. 70, 1548–1550 (1997)
S.O. Kucheyev, J.E. Bradby, J.S. Williams, S.M.V. Jagadish, Mechanical deformation of single-crystal ZnO. Appl. Phys. Lett. 80, 956–958 (2002)
C.Q. Sun, B.K. Tay, X.T. Zeng, S. Li, T.P. Chen, J. Zhou, H.L. Bai, E.Y. Jiang, Bond-order-bond-length-bond-strength (bond OLS) correlation mechanism for the shape-and-size dependence of a nanosolid. J.Phys.: Condens. Matter 14, 7781–7795 (2002)
Y. Xia, P. Yang, Y. Sun, Y. Wu, B. Mayers, B. Gates, Y. Yin, F. Kim, H. Yan One-dimensional nanostructures: synthesis, characterization, and applications. Adv. Mater. (Weinheim, Ger.) 15, 353–389 (2003)
A.A. Kudryavtsev, The Chemistry and Technology of Selenium and Tellurium (Collet’s Ltd., London, 1974)
A.J. Kulkarni, M. Zhou, F.J. Ke, Orientation and size dependence of the elastic properties of zinc oxide nanobelts. Nanotechnology 16, 2749–2756 (2005)
Y. Wen, Y. Zhang, Z. Zhu, Size-dependent effects on equilibrium stress and strain in nickel nanowires. Phys. Rev. B 76, 125423 (2007)
H. Gao, C.H. Chiu, J. Lee, Elastic contact versus indentation modeling of multi-layered materials. Int. J. Solids Struct. 29, 2471–2492 (1992)
M. Lucas, W. Mai, R. Yang, Z.L. Wang, E. Riedo, Aspect ratio dependence of the elastic properties of ZnO nanobelts. Nano Lett. 7, 1314–1317 (2007)
R.E. Miller, V.B. Shenoy, Size-dependent elastic properties of nanosized structural elements. Nanotechnology 11, 139 (2000)
R. Dingreville, J.M. Qu, M. Cherkaoui, Surface free energy and its effect on the elastic behavior of nano-sized particles, wires and films, J. Mech. Phys. Solids 53, 1827 (2005)
J. He, C.M. Lilley, Surface effect on the elastic behavior of static bending nanowires. Nano Lett. 8, 1798–1802 (2008)
M.T. McDowell, A.M. Leach, K. Gall, On the elastic modulus of metallic nanowires. Nano Lett. 8, 3613–3618 (2008)
B. Lee, R.E. Rudd, First-principles calculation of mechanical properties of Si < 001 > nanowires and comparison to nanomechanical theory. Phys. Rev. B 75, 195328 (2007)
P.S. Branicio, J.P. Rino, Large deformation and amorphization of Ni nanowires under uniaxial strain: A molecular dynamics study. Phys. Rev. B. 62, 16950–16955 (2000)
P. Villain, P. Beauchamp, K.F. Badawi, P. Goudeau, P.O. Renault Atomistic calculation of size effects on elastic coefficients in nanometer-sized tungsten layers and wires. Scr. Mater. 50, 1247–1251 (2004)
X. Li, T. Ono, Y. Wang, M. Esashi, Ultrathin single-crystalline-silicon cantilever resonantors: Fabrication technology and significant specimen size effect on Young’s modulus. Appl. Phys. Lett. 83, 3081–3083 (2003)
C.Y. Nam, T.D. Jaroenapibal, D.E. Luzzi, S. Evoy, J.E. Fischer, Diameter-dependent electromechanical properties of GaN nanowires. Nano Lett. 6, 153–158 (2006)
L. Dong, B.J. Nelson, Tutorial-Robotics in the small, Part II: Nanorobotics. IEEE Robot. Automat. Mag. 14, 111–121 (2007)
L. Dong, A. Subramanian, B.L. Nelson, Carbon nanotubes for nanorobotics. Nanotoday 2, 12–20 (2007)
M.Y.A. Yousif, P. Lundgren, P. Ghavanini, B.S. Enoksson, CMOS considerations in nanoelectromechanical carbon nanotube-based switches. Nanotechnology 19, 285204 (2008)
Z.L. Wang, J. Song, Piezoelectric nanogenerators based on zinc oxide nanowire arrays. Science 312, 242–246 (2006)
X. Wang, J. Song, J. Liu, Z.L. Wang Direct-current nanogenerator driven by ultrasonic waves. Science 316, 102–105 (2007)
B.A. Buchine, W.L. Hughes, F.L. Degertekin, Z.L. Wang, Bulk acoustic resonator based on piezoelectric ZnO belts. Nano Lett. 6, 1155–1159 (2006)
R. Yang, Y. Qin, L. Dai, Z.L. Wang, Power generation with laterally packaged piezoelectric fine wires. Nature Nanotech. 4, 34–39 (2009)
L. Xiao, Z. Chen, C. Feng, L. Liu, Z.Q. Bai, Y. Wang, L. Qian, Y. Zhang, Q. Li, K. Jiang, S. Fan, Flexible, stretchable, transparent carbon nanotube thin film loudspeakers. Nano Lett. 8, 4539–4545 (2008)
M.F. Ashby, Y.J.M. Brechet, Designing hybrid materials. Acta Mater. 51, 5801–5821 (2003)
F. Patolsky, B.P. Timko, G. Yu, Y. Fang, A.B. Greytak, G. Zheng, C.M. Lieber, Detection, stimulation, and inhibition of neuronal signal with high-density nanowire transistor arrays. Science 313, 1100–1104 (2006)
X. Duan, Y. Huang, R. Agarwal, C.M. Lieber, Single-nanowire electrically driven lasers. Nature 421, 241–245 (2003)
Y. Li, F. Qian, J. Xiang, C.M. Lieber, Nanowire electronic and optoelectronic devices. Materials Today 9, 18–27 (2006)
B.T. Tian, X. Zheng, T.J. Kempa, Y. Fang, N. Yu, G. Yu, J. Huang, C.M. Lieber, Coaxial silicon nanowires as solar cells and nanoelectronic power sources. Nature 449, 885–889 (2007)
P.J. Pauzauskie, P. Yang, Nanowire photonics. Mater. Today 9, 36–45 (2006)
Y. Cui, Q. Wei, H. Park, C.M. Lieber, Nanowire nanosensors for highly sensitive and selective detection of biological and chemical species. Science 293, 1289–1292 (2001)
F. Patolsky, C.M. Lieber, Nanowire nanosensors. Mater. Today 8(4), 20–28 (2005)
M. Willander, P. Klason, L.L. Yang, S.M. Al-Hilli, Q.X. Zhao, O. Nur, ZnO nanowires: chemical growth, electrodeposition, and application to intracellular nano-sensors. Phys. Stat. Sol. (c) 5, 3076–3083 (2008)
K.L. Johnson, K. Kendall, A.D. Roberts, Surface energy and the contact of elastic solids. Proc. R. Soc. London A 324, 301–313 (1971)
B.V. Derjaguin, V.M. MĂ¼ller, Y.P. Toporov, Effect of contact deformation on the adhesion of particles. J. Colloid Interf. Sci. 53, 314–326 (1975)
D. Maugis, Adhesion of spheres: the JKR-DMT transition using a Dugdale model. J. Colloid Interface Sci. 150, 243–269 (1992)
Author information
Authors and Affiliations
Corresponding author
Editor information
Editors and Affiliations
Rights and permissions
Copyright information
© 2010 Springer-Verlag Berlin Heidelberg
About this chapter
Cite this chapter
Stan, G., Cook, R.F. (2010). Mechanical Properties of One-Dimensional Nanostructures. In: Bhushan, B. (eds) Scanning Probe Microscopy in Nanoscience and Nanotechnology. NanoScience and Technology. Springer, Berlin, Heidelberg. https://doi.org/10.1007/978-3-642-03535-7_16
Download citation
DOI: https://doi.org/10.1007/978-3-642-03535-7_16
Published:
Publisher Name: Springer, Berlin, Heidelberg
Print ISBN: 978-3-642-03534-0
Online ISBN: 978-3-642-03535-7
eBook Packages: Chemistry and Materials ScienceChemistry and Material Science (R0)