Abstract
In this project, an algorithm for the determination of the positions and the strengths of sound sources in closed combustion chambers by the evaluation of wall-flush-mounted microphones is presented. The theoretical background of the reconstruction of sound sources is the nearfield acoustic holography. In the theory of nearfield acoustic holography, evanescent modes of the sound pressure field have to be taken into consideration. The choice of these modes is described in detail. Since the problem is ill-conditioned, different regularization methods are used for the solution of the inverse acoustic problem. The algorithm is applied to optimize the arrangement of a sensor array with 48 microphones and the dependence on contaminating noise is investigated. The focus of this project is the localization of real sound sources not exactly located on the assumed source distribution. For this case, a scanning technique is introduced and its applicability is investigated.
Access this chapter
Tax calculation will be finalised at checkout
Purchases are for personal use only
Preview
Unable to display preview. Download preview PDF.
References
Ahmadian H, Mottershead JE, Friswell MI (1998) Regularisation methods for finite element model updating. Mechanical Systems and Signal Processing 12(1): 47–64
Bellucci V, Schuermans B, Nowak D, Flohr P, Paschereit CO (2005) Thermoacoustic Modeling of a Gas Turbine Combustor Equipped with Acoustic Dampers. Journal of Turbomachinery 127(2): 372–379
Dowling AP, Morgans AS (2005) Feedback Control of Combustion Oscillations. Annual Review of Fluid Mechanics 27(2): 151–182
Ducruix S, Schuller T, Durox D, Candel S (2003) Combustion Dynamics and Instabilities: Elementary Coupling and Driving Mechanisms. Journal of Propulsion and Power 19(5): 722–734
Güthe F, Lachner R, Schuermans B, Biagioli F, Geng W, Inauen A, Schenker S, Bombach R, Hubschmidt W (2006) Flame imaging on the ALSTOM EV-burner: thermo acoustic pulsations and CFD-validation. AIAA paper 2006-437
Kim Y, Nelson PA (2003) Estimation of acoustic source strength within a cylindrical duct by inverse methods. Journal of Sound and Vibration 275: 391–413
Kim Y, Nelson PA (2003) Optimal regularisation for acoustic source reconstruction by inverse methods. Journal of Sound and Vibration 275: 463–487
Krebs W, Flohr P, Prade B, Hoffmann S (2002) Thermoacoustic Stability Chart for High-Intensity Gas Turbine Combustion Systems. Combustion Science and Technology 174(7): 99–128
Lieuwen TC, Yang V eds. (2005) Combustion Instabilities in Gas Turbine Engines. Progress in Astronautics and Aeronautics 210. AIAA, Inc.
Lowis CR, Joseph P (2005) Inversion Technique for Determining the Strength of Rotating Broadband Sources in Ducts. 11th AIAA/CEAS Aeroacoustics Conference, Monterey, CA
Maynard JD, Williams EG, Lee Y (1985) Nearfield acoustic holography: I. Theory of generalized holography and the development of NAH. Journal of the Acoustical Society of America 78: 1395–1412
Nelson PA, Yoon SH (2000) Estimation of acoustic source strength by inverse methods: Part I, Conditioning of the inverse problem. Journal of Sound and Vibration 233(4): 643–668
Paschereit CO, Gutmark E, Weisenstein W (1998) Structure and control of thermoacoustic instabilities in a gas-turbine combustor. 138: 213–232
Paschereit CO, Schuermans B, Bellucci V, Flohr P (2005) Implementation of Instability Prediction in Design: ALSTOM Approaches. In: Combustion Instabilities in Gas Turbine Engines, Lieuwen TC, Yang V eds Progress in Astronautics and Aeronautics 210: 445–480. AIAA, Inc.
Rajaram R, Lieuwen T (2003) Parametric Studies of Acoustic Radiation from Premixed Flames. Combustion Science and Technology 175(12): 2269–2298
Richards GA, Thornton JD, Robey EH, Arellano L (2007) Open-Loop Active Control of Combustion Dynamics on a Gas Turbine Engine. Journal of Engineering for Gas Turbines and Power 129(1): 38–48
Rienstra SW, Tester BJ (2006) An Analytic Green’s Function for a Lines Circular Duct Containing Uniform Mean Flow. 11th AIAA/CEAS Aeroacoustics Conference, Monterey, CA
Schuermans BBH, Polifke W, Paschereit CO, van der Linden JH (2000) Prediction of Acoustic Pressure Spectra in Combustion Systems Using Swirl Stabilized Gas Turbine Burners. ASME paper 2000-GT-0105
Tapken U, Enghardt L (2006) Optimization of Sensor Arrays for Radial Mode Analysis in Flow Ducts. 12th AIAA/CEAS Aeroacoustics Conference, Cambridge, MA
Wäsle J, Winkler A, Sattelmayer T (2005) Influence of the Combustion Mode on Acoustic Spectra of Open Turbulent Swirl Flames. Proceedings of the 12th International Congress on Sound and Vibration, Lisbon, Portugal
Yoon SH, Nelson PA (2000) Estimation of acoustic source strength by inverse methods: Part II, Experimental investigation of methods for choosing regularization parameters. Journal of Sound and Vibration 233(4): 669–705
Author information
Authors and Affiliations
Corresponding author
Editor information
Editors and Affiliations
Rights and permissions
Copyright information
© 2009 Springer-Verlag Berlin Heidelberg
About this chapter
Cite this chapter
Pfeifer, C., Moeck, J.P., Paschereit, C.O., Enghardt, L. (2009). Localization of Sound Sources in Combustion Chambers. In: Schwarz, A., Janicka, J. (eds) Combustion Noise. Springer, Berlin, Heidelberg. https://doi.org/10.1007/978-3-642-02038-4_10
Download citation
DOI: https://doi.org/10.1007/978-3-642-02038-4_10
Published:
Publisher Name: Springer, Berlin, Heidelberg
Print ISBN: 978-3-642-02037-7
Online ISBN: 978-3-642-02038-4
eBook Packages: EngineeringEngineering (R0)