Introduction
One of the most common incipient losses of structural integrity in mechanical structures is the development and propagation of cracks. A crack may propagate from some small imperfections on the surface of the body or inside of the material and it is most likely to appear in correspondence of high stress concentration. For example, figure 1.1 shows a crack developed in the stiffening plate of a generator casing.
Access this chapter
Tax calculation will be finalised at checkout
Purchases are for personal use only
Preview
Unable to display preview. Download preview PDF.
References
Allianz Berichte, Nr. 24 (November 1987) ISSN 0569-0692
Mayes, I.W., Davies, W.G.R.: A method of calculating the vibrational behaviour of coupled rotating shafts containing a transverse crack. In: Institution of Mechanical Engineers Conference Publication, 2nd International Conference Vibration in Rotating Machinery, Cambridge, UK, paper C254/80, pp. 17–27 (1980)
DeForest, D.H., Grobel, L.P., Schabtach, C., Seguin, B.R.: Investigation of the Generator Rotor Burst at the Pittsburg Station of the Pacific Gas and Electric Company. ASME Paper No. 57-PWR-12, 3–14 (1957)
Ishida, Y.: Cracked Rotors: Industrial Machine Case Histories and Nonlinear Effects Shown by Simple Jeffcott Rotor. Mechanical Systems and Signal Processing 22(4), 805–817 (2008)
Rankin, A.W., Seguin, B.R.: Report of the Investigation of the Turbine Wheel Fracture at Tanners Creek. Transactions of the ASMEÂ 78(10), 1527 (1956)
Schabtach, C., Fogleman, E.L., Rankin, A.W., Winne, D.H.: Report of the Investigation of Two Generator Rotor Fractures. Transactions of the ASMEÂ 78(10), 1567 (1956)
Emmert, H.D.: Investigation of Large Steam-Turbine Spindle Failure. Transactions of the ASME 78-10(1956-10), 1547–1565 (1956)
Whyte, R.R.: Engineering Progress Through Trouble. The Institution of Mechanical Engineers, ch.10 (1975)
Yoshida, M.: Steam Turbine Rotor Accidents and its Countermeasure. Turbomachinery 728, 4–11 (1976)
Jack, A.R., Paterson, A.N.: Cracking in 500MW LP Rotor Shafts. In: 1st Mech. Eng. Conference, The Influence of the Environment on Fatigue (1976)
Muszynska, A.: Shaft Crack Detection. In: 7th Machinery Dynamics Seminar, Edmonton, Canada (1982)
Laws, C.W.: A Brief History of Cracked Rotor Saves – Turbine Generators in the U.K. Rated 60MW to 660MW (1971-1981). Bently Rotor Dynamics Co Seminar on Shaft Crack Detection, Atlanta GA, USA (1986)
Ziebarth, H., Baumgartner, R.J.: Early Detection of Cross-Sectional Rotor Cracks by Turbine Shaft Vibration Monitoring Techniques. ASME Paper 81-JPGC-PWR-26 (1981)
Papadopoulos, C.A., Dimarogonas, W.: Stability of Cracked Rotors in the Coupled Vibration Mode. ASME Journal of Vibrations, Acoustics, Stress and Reliability in Design 110, 356–359 (1988)
United States Nuclear Regulatory Commission, Information Notice 86-19: Reactor Coolant Pump Shaft Failure at Crystal River (1986)
United States Nuclear Regulatory Commission, Information Notice 89-15: Second Reactor Coolant Pump Shaft Failure at Crystal River (1989)
The Tampa Tribune, 14-B, January 20 (1989)
Maxwell, J.H., Rosario, D.A.: Using modelling to predict vibration from a shaft crack. In: Condition Monitoring and Diagnostic Engineering Management (COMADEM 2001), pp. 243–250. Elsevier, Amsterdam (2001)
United States Nuclear Regulatory Commission, Information Notice 2005-08: Monitoring Vibration to Detect Circumferential Cracking of Reactor Coolant Pump and Reactor Recirculation Pump Shafts (2005)
Inagaki, T., Hirabayashi, M.: Transverse Vibrations of Cracked Rotors (Examples of Crack Detection and Vibration Analysis). Transactions of JSME 582, 56–523 (1990)
Sanderson, A.F.P.: The Vibration Behaviour of a Large Steam Turbine Generator During Crack Propagation Through the Generator Rotor. In: IMechE International Conference on Vibrations in Rotating Machinery, Bath, UK, paper C432/102, pp. 263–273 (1992)
Schöllhorn, K., Ebi, G., Steigleder, K.: Frettinganrisse in einem 936-MW Turbogeneratorrotor. VGB Kraftwerkstechnik 73(4), 340–344 (1993)
Bicego, V., Lucon, E., Rinaldi, C., Crudeli, R.: Failure analysis of a generator rotor with a deep crack detected during operation: Fractographic and fracture mechanics approach. Nuclear Engineering and Design 188(2), 173–183 (1999)
Rights and permissions
Copyright information
© 2010 Springer-Verlag Berlin Heidelberg
About this chapter
Cite this chapter
Bachschmid, N., Pennacchi, P., Tanzi, E. (2010). Cracks in Rotating Shafts. In: Cracked Rotors. Springer, Berlin, Heidelberg. https://doi.org/10.1007/978-3-642-01485-7_1
Download citation
DOI: https://doi.org/10.1007/978-3-642-01485-7_1
Publisher Name: Springer, Berlin, Heidelberg
Print ISBN: 978-3-642-01484-0
Online ISBN: 978-3-642-01485-7
eBook Packages: EngineeringEngineering (R0)