Abstract
The primary aim of this chapter is to introduce the state of the art applications of the harmony search (HS) algorithm in mechanical, chemical and electrical engineering fields. The HS algorithm has been broadly utilized in complex optimization problems arising in most engineering applications. It has been reported to be a viable alternative to other conventional optimization techniques in these engineering disciplines. This chapter is intended to discuss the available literature in the field and to provide general information for those who are interested in optimized-design of thermal systems, economic utilization of electric power-systems and optimization of machining processes.
Access this chapter
Tax calculation will be finalised at checkout
Purchases are for personal use only
Preview
Unable to display preview. Download preview PDF.
References
Wikipedia, Shell and tube heat exchanger (2005) (accessed October 25, 2008), http://en.wikipedia.org/wiki/Shell_and_tube_heat_exchanger
Özçelik, Y.: Exergetic optimization of shell and tube heat exchangers using a genetic based algorithm. Appl. Therm. Eng. 27, 1849–1856 (2007)
Sun, S.-y., Lu, Y.-d., Yan, C.-q.: Optimization in calculation of shell-tube heat exchanger. Int. Comm. Heat Mass Transfer 20, 675–685 (1993)
Lerou, P.P.P.M., Veenstra, T.T., Burger, et al.: Optimization of counterflow heat exchanger geometry through minimization of entropy generation. Cryogenics 45, 659–669 (2005)
Taborek, J.: Shell and tube heat exchangers: single phase flow, Heat Exchanger Design Handbook. Hemisphere, New York (1982)
Saunders, E.A.D.: Heat exchangers – selection, design, construction. Longman scientific and technical, New York (1988)
Hewitt, G.F., Shires, G.L., Bott, T.R.: Process heat transfer. CRC Press, Boca Raton (1994)
Fesanghary, M., Damangir, E., Soleimani, I.: Design optimization of shell and tube heat exchangers using global sensitivity analysis and harmony search algorithm. Appl Therm. Eng. (2008), doi:10.1016/j.applthermaleng.2008.05.018
Perry, R.J., Chilton, C.H.: Chemical Engineers Handbook. McGraw-Hill, New York (1973)
Reppich, M., Kohoutek, J.: Optimal design of shell-and-tube heat exchangers. Computers Chem. Engng. 18, 295–299 (1994)
Zalewski, W., Niezgoda-Zelasko, B., Litwin, M.: Optimization of evaporative fluid coolers. International Journal of Refrigeration 23, 553–565 (2000)
Gonzalez, M.T., Petrcci, N.C., Urbicain, M.J.: Air-cooled heat exchanger design using successive quadratic programming (SQP). Heat Transfer Engineering 22, 11–16 (2001)
Saffar-Avval, M., Damangir, E.: A general correlation for determining optimum baffle spacing for all types of shell and tube exchangers. Int. J. Heat Mass Transfer 38, 2501–2506 (1995)
Soltan, B.K., Saffar-Avval, M., Damangir, E.: Minimizing capital and operating costs of shell and tube condensers using optimum baffle spacing. Appl. Thermal Eng. 24, 2801–2810 (2004)
Fesanghary, M., Mahdavi, M., Minary, M., Alizadeh, Y.: Hybridizing harmony search algorithm with sequential quadratic programming for engineering optimization problems. Comput. Methods Appl. Mech. Engrg. 197, 3080–3091 (2008)
Chaudhuri, P.D., Diwekar, U.M., Logsdon, J.S.: An automated approach for the optimal design of heat exchangers. Ind. Eng. Chem. Res. 36, 3685–3693 (1997)
Selbaş, R., Kızılkan, Ö., Reppich, M.: A new design approach for shell-and-tube heat exchangers using genetic algorithms from economic point of view. Chemical Engineering and Processing 45, 268–275 (2006)
Ozkol, I., Komurgoz, G.: Determination of the optimum geometry of the heat exchanger body via a genetic algorithm. Numerical Heat Transfer, Part A 48, 283–296 (2005)
Gholap, A.K., Khan, J.A.: Design and multi-objective optimization of heat exchangers for refrigerators. Applied Energy 84, 1226–1239 (2007)
Allen, B., Gosselin, L.: Optimal geometry and flow arrangement for minimizing the cost of shell-and-tube condensers. Int. J. Energy Res. (2008), doi:10.1002/er.1398
Wildi-Tremblay, P., Gosselin, L.: Minimizing shell-and-tube heat exchanger cost with genetic algorithms and considering maintenance. Int. J. Energy Res. 31, 867–885 (2007)
Agarwal, A., Gupta, S.K.: Jumping gene adaptations of NSGA-II and their use in the multi-objective optimal design of shell and tube heat exchangers. Chemical Engineering Research and Design 86, 123–139 (2008)
Doodman, A., Fesanghary, M., Hosseini, R.: A robust stochastic approach for design optimization of air cooled heat exchangers. Applied Energy (2008), doi:10.1016/j.apenergy.2008.08.021
Wikipedia, heat pipe (2004) (accessed October 25, 2008), http://en.wikipedia.org/wiki/Heat_pipe
What is a Heat Pipe? (2008) (accessed October 25, 2008), http://www.cheresources.com/htpipes.shtml
Geem, Z.W., Hwangbo, H.: Application of harmony search to multi-objective optimization for satellite heat pipe design. In: Proceedings of the US-Korea Conference on Science, Technology, and Entrepreneurship (UKC 2006), CD-ROM (2006)
Rajesh, V.G., Ravindran, K.P.: Optimum heat pipe design: A nonlinear programming approach. International Communications in Heat and Mass Transfer 24, 371–380 (1997)
Wikipedia, economic dispatch (2005) (accessed October 25, 2008), http://en.wikipedia.org/wiki/Economic_dispatch
Lin, C.E., Chen, S.T., Huang, C.L.: A direct Newton-Raphson economic dispatch. IEEE Trans. Power Syst. 7, 1149–1154 (1992)
Lin, C.E., Viviani, G.L.: Hierarchical economic dispatch for piecewise quadratic cost functions. IEEE Trans. Power App. Syst. 103, 1170–1175 (1984)
Wood, A.J., Wollenberg, B.F.: Power generation, operation and control. Wiley, New York (1994)
Yang, H.T., Chen, S.L.: Incorporating a multi-criteria decision procedure into the combined dynamic programming/production simulation algorithm for generation expansion planning. IEEE Trans. Power Syst. 4, 165–175 (1989)
Granville, S.: Optimal reactive dispatch through interior point methods. IEEE Trans. Power Syst. 9, 136–146 (1994)
Chen, C.L., Wang, S.C.: Branch-and-bound scheduling for thermal generating units. IEEE Trans. Energy Convers. 8, 184–189 (1993)
Liang, Z.X., Glover, J.D.: A zoom feature for a dynamic programming solution to economic dispatch including transmission losses. IEEE Trans. Power Syst. 7, 544–550 (1992)
Papageorgiou, L.G., Fraga, E.S.: A mixed integer quadratic programming formulation for the economic dispatch of generators with operating zones. Electric Power Syst. Res. 77, 1292–1296 (2007)
Kuo, C.C.: A novel string structure for economic dispatch problems with practical constraints. Energy Convers. Manage (2008), doi:10.1016/j.enconman.2008.07.007
Li, F.: A comparison of genetic algorithms with conventional techniques on a spectrum of power economic dispatch problems. Expert Syst. Appl. 15, 133–142 (1998)
Baskar, S., Subbaraj, P., Rao, M.V.C.: Hybrid real coded genetic algorithm solution to economic dispatch problem. Comput. Electr. Eng. 29, 407–419 (2003)
Lin, W.M., Cheng, F.S., Tsay, M.T.: An improved tabu search for economic dispatch with multiple minima. IEEE Trans. Power Syst. 17, 108–112 (2002)
Basu, M.: A simulated annealing-based goal-attainment method for economic emission load dispatch of fixed head hydrothermal power systems. Int. J. Electron Power Energy Syst. 27, 147–153 (2005)
Song, Y.H., Chou, C.S.V., Min, Y.: Large-scale economic dispatch by artificial ant colony search algorithms. Electr. Mach. Power Syst. 27(7), 679–690 (1999)
Somasundaram, P., Kuppusamy, K., Kumudini Devi, R.P.: Economic dispatch with prohibited operating zones using fast computation evolutionary programming algorithm. Electr. Power Syst. Res. 70, 245–252 (2004)
Gaing, Z.L.: Particle swarm optimization to solving the economic dispatch considering the generator constraints. IEEE Trans. Power Syst. 18, 1187–1195 (2003)
Selvakumar, A.I., Thanushkodi, K.: Anti-predatory particle swarm optimization: Solution to nonconvex economic dispatch problems. Electr. Power Syst. Res. 78, 2–10 (2008)
Yuan, X., Su, A., Yuan, Y., et al.: An improved PSO for dynamic load dispatch of generators with valve-point effects. Energy (2008), doi:10.1016/j.energy.2008.09.010
Guo, T., Henwood, M.I., van Ooijen, M.: An algorithm for combined heat and power economic dispatch. IEEE Trans. Power Syst. 11, 1778–1784 (1996)
Song, Y.H., Xuan, Q.Y.: Combined heat and power economic dispatch using genetic algorithm based penalty function method. Electric Mach. Power Syst. 26, 363–372 (1998)
Song, Y.H., Chou, C.S., Stonham, T.J.: Combined heat and power economic dispatch by improved ant colony search algorithm. Electric Power Systems Research 52, 115–121 (1999)
Sudhakaran, M., Slochanal, S.M.R.: Integrating genetic algorithms and tabu search for combined heat and power economic dispatch. Power System Stability and Control 1, 67–71 (2003)
Su, C.T., Chiang, C.L.: An incorporated algorithm for combined heat and power economic dispatch. Electric Power Systems Research 69, 187–195 (2004)
Groover, M.P.: Fundamentals of Modern Manufacturing. Wiley, New York (2000)
Tolouei-Rad, M., Bidhendi, I.M.: On the optimization of machining parameters for milling operations. Int. J. Mach. Tools Manuf. 37, 1–16 (1997)
Sonmez, A.I., Baykasoglu, A., Dereli, T., et al.: Dynamic optimization of multipass milling operations via geometric programming. Int. J. Mach. Tools Manuf. 39, 297–320 (1999)
Jha, N.K.: A discrete data base multiple objective optimization of milling operation through geometric programming. Trans. ASME J. Eng. Ind. 112, 368–374 (1990)
Shunmugam, M.S., Bhaskara, R.S.V., Narendran, T.T.: Selection of optimal conditions in multi-pass face-milling using a genetic algorithm. Int. J. Mach. Tools Manuf. 40, 401–414 (2000)
Wang, Z.G., Rahman, M., Wong, Y.S., et al.: Optimization of multi-pass milling using genetic algorithm and genetic simulated annealing. Int. J. Mach. Tools Manuf. 45, 1726–1734 (2005)
Zarei, O., Fesanghary, M., Farshi, B., et al.: Optimization of multi-pass face-milling via harmony search algorithm. Journal of Materials Processing Technology (2008), doi:10.1016/j.jmatprotec.2008.05.029
Author information
Authors and Affiliations
Editor information
Editors and Affiliations
Rights and permissions
Copyright information
© 2009 Springer-Verlag Berlin Heidelberg
About this chapter
Cite this chapter
Fesanghary, M. (2009). Harmony Search Applications in Mechanical, Chemical and Electrical Engineering. In: Geem, Z.W. (eds) Music-Inspired Harmony Search Algorithm. Studies in Computational Intelligence, vol 191. Springer, Berlin, Heidelberg. https://doi.org/10.1007/978-3-642-00185-7_5
Download citation
DOI: https://doi.org/10.1007/978-3-642-00185-7_5
Publisher Name: Springer, Berlin, Heidelberg
Print ISBN: 978-3-642-00184-0
Online ISBN: 978-3-642-00185-7
eBook Packages: EngineeringEngineering (R0)