Abstract
In this paper, numerical predictions and experiment of characteristics of a hydrodynamic and thermally developed turbulent flow through a square duct (30×30 mm) with twisted tape inserts and with twisted tape inserts plus axial interrupted ribs are conducted to investigated regionally averaged heat transfer and friction factors. Turbulent swirl flows having Reynolds numbers ranging from 8,900 to 29,000, a rib height-to-channel hydraulic diameter (e/D h) of 0.067, and a length-to hydraulic diameter (L/D h) of 30, are considered. The square ribs are arranged to follow the trace of the twisted tape and along the flow direction defined as axial interrupted ribs. The twisted tape is 1.0 mm thick carbon steel sheet with diameter of 28mm, length of 900mm, and 2.5 turns. Each wall of the square channel is composed of isolated aluminum sections. Two heating conditions are investigated for test channels with twisted tape inserts and rib turbulators: (i) electric heat uniformly applied to four side walls of the square duct, and (ii) electric heat uniformly applied to two opposite ribbed walls of the square channel. The correlation for friction factor and Nusselt number are derived from the predicted date. The results show that uneven surface heating enhances the heat transfer coefficient over uniform heating conditions, and significant improvements can be achieved with twisted tape inserts plus axial interrupted ribs compare to the case of twisted tape inserts.
Keywords
Access this chapter
Tax calculation will be finalised at checkout
Purchases are for personal use only
Preview
Unable to display preview. Download preview PDF.
References
Ahn, S.W., Kang, H.K., Bae, S.T. and Lee, D.H., 2008, “Heat Transfer and Friction Factor in a Square Channel with One, Two, or Four Inclined Ribbed Walls”, ASME. J. Turbomachinery, Vol. 130, 034501–034501
Chang, S.W., Jan, Y.J. and Liou, J.S., 2007, “Turbulent Heat Transfer and Pressure Drop in Tube Fitted with Serrated Twisted Tape”, Int. J. Thermal Sciences, Vol. 28, pp. 97–115
Dittus, F.W. and Boelter, L.M.K., 1930, University of California, Berkeley, CA, Publications in Engineering, Vol. 2, pp. 443–452
Eiamsa-ard, S., Thianpong, C. and Promvonge, P., 2006, “Experimental Investigation of Heat Transfer and Flow Friction in a Circular Tube Fitted with Regularly Spaced Twisted Tape Elements”, Int. Commun. Heat Mass Transfer, Vol. 33, pp. 1225–1233
Han, J.C., 1988, “Heat Transfer and Friction Characteristics in Rectangular Channels with Rib Turbulators”, ASME, J. Heat Transfer, Vol. 110, pp. 321–328
Manglik, R.M. and Bergles, A.E., 1993, “Heat Transfer and Pressure Drop Correlations for Twisted-tape Inserts in Isothermal Tubes: Part II-Transition and Turbulent Flows”, ASME J. Heat Transfer, Vol. 115, pp. 890–896
Menter, F.R., 1993, “Zonal Two Equation κ ω — Turbulence Models for Aerodynamic Flows”, AIAA Paper, 98-0522
Ray, S. and Date, A.W., 2003, “Friction and Heat Transfer Characteristics of Flow through Square Duct with Twisted Tape Insert”, Int. J. Heat Mass Transfer, Vol. 46, pp. 889–902
Wang, L.B., Tao, W.Q., Wang, Q.W. and He, Y.L., 2001, “Experimental and Numerical Study of Turbulent Heat Transfer in Twisted Square Ducts”, ASME. J. Heat Transfer, Vol. 123, pp. 868–877
Webb, R.L., 1981, “Performance Evaluation Criteria for Use of Enhanced Heat Transfer Surface in Heat Exchanger Design”, Int. J. Heat Transfer, Vol. 24, pp. 715–726
Wilcox, D., 1986, Turbulence Modeling for CFD, DCW Industries, Inc., La Canada, CA
Zhang, Y.M., Azad, G.M., Han, J.C. and Lee, C.P., 2000, “Turbulent Heat Transfer Enhancement and Surface Heating Effect in Square Channels with Wavy, and Twisted Tape Inserts with Interrupted Ribs,” J. of Enhanced Heat Transfer, Vol. 7, pp. 35–49
Author information
Authors and Affiliations
Corresponding author
Editor information
Editors and Affiliations
Rights and permissions
Copyright information
© 2009 Tsinghua University Press, Beijing and Springer-Verlag GmbH Berlin Heidelberg
About this paper
Cite this paper
Kang, HK., Ahn, SW., Ary, BKP., Choi, JW. (2009). Swirl Flow and Heat Transfer Through Square Duct with Twisted Tape Insert. In: Xu, J., Wu, Y., Zhang, Y., Zhang, J. (eds) Fluid Machinery and Fluid Mechanics. Springer, Berlin, Heidelberg. https://doi.org/10.1007/978-3-540-89749-1_16
Download citation
DOI: https://doi.org/10.1007/978-3-540-89749-1_16
Publisher Name: Springer, Berlin, Heidelberg
Print ISBN: 978-3-540-89748-4
Online ISBN: 978-3-540-89749-1
eBook Packages: EngineeringEngineering (R0)