Abstract
Manufacturing Flexibility is seen as the main answer for surviving in markets characterized by frequent volume changes and evolutions of the technological requirements of products. However, the competitiveness of a firm can be strongly affected by capital intensive investments in system flexibility. This chapter presents an approach to design new manufacturing system architectures endowed with the right level of flexibility required by the specific production problem. These systems are named Focused Flexibility Manufacturing Systems (FFMSs). The key idea consists in tuning system flexibility on the production problem to cope with uncertainty related to the evolution of product demand. The significance of this topic and its potential impact on the industrial sector in the medium-long run is testified by the interest shown by companies making initial efforts in this field.
Access this chapter
Tax calculation will be finalised at checkout
Purchases are for personal use only
Preview
Unable to display preview. Download preview PDF.
References
Ahmed S, King A, Parija G (2003) A multi-stage stochastic integer programming approach for capacity expansion under uncertainty. J Glob Optim 26:3–24
Anglani A, Grieco A, Pacella M, Tolio T (2002) Object-oriented modeling and simulation of flexible manufacturing systems: a rule-based procedure. Simul Model Prac Theory 10(3):209–234
Amico M, Asl F, Pasek Z, Perrone G (2007) Real options: an application to RMS investment evaluation. In Dashchenko AI (ed) Reconfigurable manufacturing systems and transformable factories. Springer, New York
Beach R, Muhlemann AP, Price DHR, Paterson A, Sharp JA (2000) A review of manufacturing flexibility. Eur J Oper Res 122:41–57
Bengtsson J (2001) Manufacturing flexibility and real options. A review. Int J Prod Econ 74:213–224
Bruccoleri M, Lo Nigro G, Noto La Diega S, Perrone G, Renna P (2005) Strategic planning in advanced manufacturing systems: a decision support system. In Semeraro Q, Matta A (eds) Design of advanced manufacturing systems models for capacity planning in advanced manufacturing systems. Springer, New York
Cantamessa M, Capello C (2007) Flexibility in manufacturing – outlining an empirically-based method for its valuation. 8th AITeM Conference, Montecatini Terme, 10–12 September, 2007
Cantamessa M, Valentini C (2000) Planning and managing manufacturing capacity when demand is subject to diffusion effects. Int J Prod Econ 66:227–240
Cantamessa M, Fichera S, Grieco A, Perrone G, Tolio T (2007) Methodologies and tools to design production systems with focused flexibility. Proceedings of the 4th international conference on digital enterprise technology, Bath, UK, 19–21 September, pp 627–636
Copeland T, Antikarov V (2001) Real options: a practitioners’ guide. Texere, New York
Chryssolouris G (1996) Flexibility and its measurement. Ann CIRP 45(2):581–587
Ganzi E, Tolio T (2003) Configuration and Re-Configuration of Manufacturing Systems with Focused Flexibility. 6th Convegno A.I.Te.M., Gaeta, Sept 2003, pp 1–10
Grieco A, Nucci F, Anglani A (2003) Representation of fuzzy time variables in discrete event simulation. Integr Computer-Aided Eng 10(4):305–318
Gupta D, Buzacott JA (1989) A framework for understanding flexibility of manufacturing systems. J Manuf Syst 8(2):89–97
Hutchinson GK, Pflughoeft KA (1994) Flexible process plan: their value in flexible automation systems. Int J Prod Res 32(3):707–719
IDEF0, www.idef.com/pdf/idef0.pdf
Koren Y (2003) ERC/CIRP survey on flexible manufacturing systems. Working Group A/M/O meeting, Paris, 01.2003
Koren Y (2005) Reconfigurable manufacturing and beyond (Keynote Paper), CIRP 3rd International Conference on Reconfigurable Manufacturing, Ann Arbor, Michigan, 11–12 May 2005
Koren Y (2006) General RMS characteristics. Comparison with dedicated and flexible systems. In: Dashchenko AI (2006) Reconfigurable manufacturing systems and transformable factories, Springer Verlag, Berlin/Heidelberg, pp 27–46
Koren Y, Hu SJ, Weber TW (1998) Impact of manufacturing system configuration on performance. Ann CIRP 47(1):369–372
Koren Y, Heisel U, Jovane F, Moriwaki T, Pritschow G, Ulsoy G, Van Brussel H (1999) Reconfigurable manufacturing systems. Ann CIRP 48(2): 527–540
Koste L, Malhotra MK (1999) A theoretical framework for analyzing the dimensions of manufacturing flexibility. J Oper Manag 18(1):75–93
Kulatilaka N, Marks SG (1988) The strategic value of flexibility: reducing the ability to compromise. Am Econ Rev 78(3):574–580
Landers RG (2000) A new paradigm in machine tools: Reconfigurable machine tools. Japan-USA symposium on flexible automation, Ann Arbor, Michigan, 2000
Ling C, Spicer P, Son SY, Hart J, Yip-Hoi D (1999) An example demonstrating system level reconfigurability for RMS. ERC/RMS Technical Report 29
Matta A, Semeraro Q (2005) Design advanced manufacturing systems – models for capacity planning in advanced manufacturing systems. Springer, New York, ISBN 1-4020-2930-6, pp 1–267
Matta A, Semeraro Q, Tolio T (2005) A framework for long term capacity decisions in AMSs. In: Matta A, Semeraro Q (ed) Design advanced manufacturing systems – models for capacity planning in advanced manufacturing systems. Springer, New York
Matta A, Tomasella M, Valente A (2008b) Impact of ramp-up on the optimal capacity-related reconfiguration policy. Int J Flex Manuf Syst 19(3):173–194
Matta A, Tolio T, Karaesmen F, Dallery Y (2001) An integrated approach for the configuration of automated manufacturing systems. Robotics Comput Integr Manuf 17:19–26
Matta A, Tomasella M, Clerici M, Sacconi S (2008a) Optimal reconfiguration policy to react to product changes. Int J Prod Res 46(10): 2651–2673
Sethi AK, Sethi SP (1990) Flexibility in manufacturing: a survey. Int J Flex Manuf Syst 2:289–328
Stecke KE (1985) Design, planning, scheduling and control problem of flexible manufacturing systems. Ann Oper Res 3:1–13
Terkaj W, Tolio T (2007) An approach to production system design considering the utility of the machine tool builder. 40th CIRP International Seminar on Manufacturing Systems, Liverpool, UK, 30 May–1 June 2007
Tolio T, Valente A (2006) An approach to design the flexibility degree in flexible manufacturing system. Proceedings of flexible automation & intelligent manufacturing conference, Limerick, Ireland, June 25–27, 2006, pp 1229–1236
Tolio T, Valente A (2007) A stochastic approach to design the flexibility degree in manufacturing systems with focused flexibility. Proceedings of the 4th international conference on digital enterprise technology, Bath, UK, 19–21 September, pp 380–390
Tolio T, Valente A (2008) A stochastic programming approach to design the production system flexibility considering the evolution of the part families. To appear in Int J Manuf Technol Manag – special issue on reconfigurable manufacturing systems
Terkaj W, Tolio T, Valente A (2008) Focused flexibility in production systems. In: ElMaraghy H (ed) Changeable and reconfigurable manufacturing systems. Springer, New York
Upton DM (1994) The management of manufacturing flexibility. Calif Manag Rev 36(2):72–89
Wiendahl H-P, ElMaraghy HA, Nyhuis P, Zäh MF, Wiendahl H-H, Duffie N, Brieke M (2007) Changeable manufacturing – classification, design and operation. Ann CIRP 56(2):783–809
Author information
Authors and Affiliations
Editor information
Editors and Affiliations
Rights and permissions
Copyright information
© 2009 Springer-Verlag Berlin Heidelberg
About this chapter
Cite this chapter
Terkaj, W., Tolio, T., Valente, A. (2009). Designing Manufacturing Flexibility in Dynamic Production Contexts. In: Tolio, T. (eds) Design of Flexible Production Systems. Springer, Berlin, Heidelberg. https://doi.org/10.1007/978-3-540-85414-2_1
Download citation
DOI: https://doi.org/10.1007/978-3-540-85414-2_1
Publisher Name: Springer, Berlin, Heidelberg
Print ISBN: 978-3-540-85413-5
Online ISBN: 978-3-540-85414-2
eBook Packages: EngineeringEngineering (R0)