Abstract
The development of textile reinforced concrete (TRC), where multiaxial fabrics are used in combination with fine grained concrete, allows the design of very thin-structured concrete elements with a high strength in compression as well as tension. The mechanical and fracture mechanical characteristics of the newly developed fine grained binder systems as a main component of the composite have to be known to allow for a reliable dimensioning of TRC structures. In general, the serviceability of a concrete structure is defined by the loading capacity under tension and compression determined in short-term tests as well as the time-related deformations under sustained loads investigated in long-term tests.
Access this chapter
Tax calculation will be finalised at checkout
Purchases are for personal use only
Preview
Unable to display preview. Download preview PDF.
References
Brameshuber, W., Brockmann, T. et al. (2002) Untersuchungen zum textilbewehrten Beton. (Investigations on textile reinforced concrete.) In: Beton 52, No. 9, pp. 424–429
Brameshuber, W.; Brockmann, T. (2003) Textile Reinforced Concrete (TRC) — Durability aspects of fine grained binder systems. Farmington Hill: American Concrete Institute, ACI SP-212, 2003. — In: Durability Concrete. Proceedings of the Sixth International Conference, Thessaloniki, June 1–7, (Malhotra, V.M. (Ed.)), pp. 93–111
Brameshuber, W.; Brockmann, T.; Banholzer, B. (2004) Analytical Evaluation of the Softening Behaviour of Fine Grained Concrete. Vail, Colorado: Ia-FraMCos-In: Proceedings of the 5th International Conference on “Fracture Mechanics of Concrete Structures” (FRAMCOS-5), Vail Colorado, USA 12–16 April, 2004 (Li, V.C. et al (Ed.)), Vol. 2, pp. 1145–1153
Brockmann, T. (2006) Mechanical and Fracture Mechanical Properties of Fine Grained Concrete for Textile Reinforced Composites. — In: Schriftenreihe Aachener Beiträge zur Bauforschung, Institut für Bauforschung der RWTH Aachen, Nr. 13 = Dissertation (2005), 1. Auflage 2006, 228 Seiten (http://darwin.bth.rwth-aachen.de/opus/volltexte/2006/1412/)
Brockmann, T., Brameshuber W. (2007) Size effect in tensile and compression fracture of fine grained concrete used as matrix for TRC, ACI Special Publication (ACI Falls, New Orleans) to be published 2007
CEB (1993) Comite Euro-International du Beton; Model Code: CEB-FIP Model Code 1990. Lausanne, In: Bulletin d’Information, No. 213/214
Hannawald, J. (2006) Determining the tensile softening diagramof concrete-like materials using hybrid optimization. ECF 16, 16th European Conference of Fracture, Failure Analysis of Nano and Engineering Materials and Structures, July 3–7, Alexandroupolis, Greece
Hillerborg, A. (1983) Analysis of one single crack. Amsterdam: Elsevier. — In: Fracture Mechanics of Concrete, (Wittmann, F.H. (Ed.)), pp. 223–249
Levine, D. (1996) Users guide to the PGApack parallel genetic algorithm library. ANL-95/18. Argonne National Laboratory.
Powell, M.J.D. (2003) On the use of quadratic models in unconstrained minimisation without derivatives. DAMTP 2003/NA03. Department of Applied Mathematics and Theoretical Physics, Cambridge, England. First International Conference on Optimization Methods and Software, December 2002, Hangzhou, China.
Powell, M. J. D. (2004) The NEWUOA software for unconstrained optimization without derivatives. DAMTP 2004/NA05. Department of Applied Mathematics and Theoretical Physics, Cambridge, England. 40th Workshop on Large Scale Nonlinear Optimization, Erice, Italy.
Raupach, M., Orlowsky, J., Wolff, L., Brameshuber, W., Brockmann, T. (2002) Investigations into the durability of AR glass rovings in fine-grained concrete. In: Technical Textiles 45, No. 2, pp. 93–96
Rots, J.G. (1988) Computational modeling of concrete fracture. Delft, University of Technology, Dissertation.
Rüsch, H. (1955) Versuche zur Festigkeit der Biegedruckzone. Berlin: Ernst & Sohn. In: Schriftenreihe des Deutschen Ausschusses für Stahlbeton, No. 120
Rüsch, H., Grasser, E., Rao, P.S. (1961) Grundlagen für die Bemessung bei einachsigen Spannungszuständen im Betonbau. München: Seltverlag
Uchida, Y. (2001): Determination of tension softening diagram of concrete. Japan Concrete Institute, JCI-TC992 Test Method for Fracture Property of Concrete
Ulfkjaer, J.P. et al. (1995) Analytical model for fictitious crack propagation in concrete beams. J Eng Mech 121(1), pp. 7–14
Sundara, K.T. et al. (1998) Analytical study of fictitious crack propagation in concrete beams using a bilinear σ-w relation. In: Mihashi, H., Rokugo, K. (Eds.), Prod. 3rd Intern. Conference on “Fracture Mechanics of Concrete Structures” (FRAMCOS-3), Gifu, Japan, 12–16 Oct., Vol. 1. Freiburg, AEDIFICATIO, pp. 315–324
Author information
Authors and Affiliations
Editor information
Editors and Affiliations
Rights and permissions
Copyright information
© 2007 Springer-Verlag Berlin Heidelberg
About this paper
Cite this paper
Brockmann, T. (2007). Mechanical and Fracture Mechanical Properties of Fine Grained Concrete for TRC Structures. In: Grosse, C.U. (eds) Advances in Construction Materials 2007. Springer, Berlin, Heidelberg. https://doi.org/10.1007/978-3-540-72448-3_12
Download citation
DOI: https://doi.org/10.1007/978-3-540-72448-3_12
Publisher Name: Springer, Berlin, Heidelberg
Print ISBN: 978-3-540-72447-6
Online ISBN: 978-3-540-72448-3
eBook Packages: EngineeringEngineering (R0)