Summary
The accuracy of an unstructured Navier-Stokes solver in predicting the airflow around the common tailplane airfoil NACA 64A010 at low Reynolds numbers is investigated. Since the performance of this airfoil is strongly affected by the transition of the boundary layer, the calculations using the Spalart-Allmaras, k-ω and k-ω SST models are carried out with specified transition positions on the airfoil’s surface. It turns out, that the Navier-Stokes solver can predict leading edge stall via the appearance of laminar separation bubbles. However, the code is less accurate in predicting the flow around airfoils with deflected rudders, where the onset of boundary layer separation as a result of two consecutive regions of adverse pressure gradients is predicted at too high angles of attack.
Access this chapter
Tax calculation will be finalised at checkout
Purchases are for personal use only
Preview
Unable to display preview. Download preview PDF.
References
van den Berg, B.: “Reynolds number and Mach number effects on the maximum lift and the stalling characteristics of wings at low speeds”. NLR TR 69025 U, Amsterdam, Netherlands, 1969.
CentaurTM by Centaursoft. www.centaursoft.com
Drela, M.: XFOIL: An analysis and design system for low Reynolds number airfoils. In Mueller, T.J.(Ed.): “Low Reynolds number aerodynamics”. Lecture notes in engineering. Springer, Germany, 1989, pp. 1–12.
Dods Jr., J.B.: “Wind-tunnel investigations of horizontal tails. IV — unswept plan form of aspect ratio 2 and a two-dimensional model”. NACA RM A8J21, Washington, USA, 1948.
Galle, M.; Gerhold, T.; Evans, J.: Parallel computation of turbulent flows around complex geometries on hybrid grids with the DLR-TAU code. In Keyes, D. et al. (Ed.): “Parallel computational fluid dynamics”. Proceedings of the parallel CFD ‘89 conference. Amsterdam, Netherlands, 2000.
Menter, F.R.: “Two-equation eddy-viscosity turbulence models for engineering applications”. AIAA Journal, Vol. 32 (1994), No. 8, pp. 1598–1605.
Peterson, R.F.: “The boundary-layer and stalling characteristics of the NACA 64A010 airfoil section”. NACA TN 2235, Washington, USA, 1950.
Spalart, P.R.; Allmaras, S.R.: “A one-equation turbulence model for aerodynamic flows”. AIAA Paper 92–0439, 1992.
Stivers Jr., L.S.: “Effects of subsonic Mach number on the forces and pressure distributions on four NACA MA-series airfoil sections at angles of attack as high as 28°”. NACA TN 3162, Washington, USA, 1954.
Wilcox, D.C.: “Turbulence modeling for CFD”. 2nd Ed., DCW Industries Inc., 2000.
Author information
Authors and Affiliations
Editor information
Editors and Affiliations
Rights and permissions
Copyright information
© 2004 Springer-Verlag Berlin Heidelberg
About this paper
Cite this paper
Grote, A., Kruse, M., Radespiel, R. (2004). Calculation of attached and separated flow for a tailplane airfoil with rudder. In: Breitsamter, C., Laschka, B., Heinemann, HJ., Hilbig, R. (eds) New Results in Numerical and Experimental Fluid Mechanics IV. Notes on Numerical Fluid Mechanics and Multidisciplinary Design, vol 87. Springer, Berlin, Heidelberg. https://doi.org/10.1007/978-3-540-39604-8_7
Download citation
DOI: https://doi.org/10.1007/978-3-540-39604-8_7
Publisher Name: Springer, Berlin, Heidelberg
Print ISBN: 978-3-642-53546-8
Online ISBN: 978-3-540-39604-8
eBook Packages: Springer Book Archive