Abstract
The resolution performance of a soft x-ray microscope which uses a zone plate as its focusing element is primarily dependent on the scale and accuracy with which the zone plate can be made. In order to be capable of attaining spatial resolution in the 10 – 100 nm region it is necessary to fabricate zone plates which have finest rings of this scale. Also the placement of the zones must be accurate to a fraction of the finest zone width across the zone plate diameter if aberrations are not to limit resolution.
Keywords
These keywords were added by machine and not by the authors. This process is experimental and the keywords may be updated as the learning algorithm improves.
This is a preview of subscription content, log in via an institution.
Buying options
Tax calculation will be finalised at checkout
Purchases are for personal use only
Learn about institutional subscriptionsPreview
Unable to display preview. Download preview PDF.
References
Schmahl G., et al, Zone plates for x-ray microscopy, X-ray Microscopy, Springer Series in Optical Sciences 43, 63–74, (1984).
Bögli V., Unger P. and Beneking H. Electron-beam lithography and nanometre structures: fabrication of micro zone plates. Soft X-Ray Optics and Technology, Proc. SPIE 733, in press, (1986).
Kern D., et al, Electron Beam Fabrication and Characterization Studies of Fresnel Zone Plates. Advances in Soft X-ray Science and Technology, Proc. SPIE, (1984).
Aritome H., Nagata K. and Namba S. Fabrication of zone plates with a minimum zone width smaller than 100 nm by EBL. Microelectronic Engineering 3, Elsevier Science (1985).
Browne M.T., Charalambous P., Burge R.E., Duke P.J., Michette A.G. and Simpson M.J. A new lithographic technique for the manufacture of high resolution zone plates for soft x rays. Journal de Physique, 45, 89–92, (1984).
Buckley C.J., Browne M.T. and Charalambous P., Contamination lithography for the fabrication of Zone Plate X-ray lenses. E-Beam, X-Ray & Ion Beam Techniques for Submicrometre Lithography IV, Proc SPIE 537, 213–217, (1985).
Buckley C.J., Feder R. and Browne M.T. Soft X-Ray Nano Lithography of Semitransparent Masks for the Generation of High-Resolution High-Contrast Zone Plates. Short Wavelength Coherent Radiation: Generation & Applications, Am.Inst.Phys.Conf.Proc. 147, 368–381, (1986).
Buckley C.J. The Fabrication of Gold Zone Plates and their use in Scanning X-ray Microscopy. Doctor of Philosophy Thesis, Kings College, London University, p156, p32 (1987).
Buckley C.J., Ogawa K., Browne M.T., Charalambous P., Kenney J.M., Rosser R., Ade H., Mcnulty I., Feder R. and Cheng P.C. Zone Plate Replication by Contact X-ray Lithography. X-ray Microscopy, Springer-Verlag, 247–253, (1987).
Author information
Authors and Affiliations
Editor information
Editors and Affiliations
Rights and permissions
Copyright information
© 1988 Springer-Verlag Berlin Heidelberg
About this paper
Cite this paper
Buckley, C.J., Browne, M.T., Burge, R.E., Charalambous, P., Ogawa, K., Takeyoshi, T. (1988). Zone Plates for Scanning X-Ray Microscopy: Contamination Writing and Efficiency Enhancement. In: Sayre, D., Kirz, J., Howells, M., Rarback, H. (eds) X-Ray Microscopy II. Springer Series in Optical Sciences, vol 56. Springer, Berlin, Heidelberg. https://doi.org/10.1007/978-3-540-39246-0_16
Download citation
DOI: https://doi.org/10.1007/978-3-540-39246-0_16
Publisher Name: Springer, Berlin, Heidelberg
Print ISBN: 978-3-662-14490-9
Online ISBN: 978-3-540-39246-0
eBook Packages: Springer Book Archive