Summary
LES is expected to become a powerful tool for turbulent flow calculations of practical interest in the near future. The paper is concerned with the development and first applications of a LES technique based on an explicit finite-volume method for curvilinear body-fitted grids suitable to simulate flows in or around complex geometries. Two different subgrid-scale models are implemented and tested. For the near-wall treatment different wall function approaches as well as no-slip boundary conditions can be applied. This technique has been used to simulate six different internal and external flow configurations: plane channel flow, flow through a straight square duct and a 180° bend, flow around a surface-mounted cubical obstacle and the flow past a long, square as well as a circular cylinder. For four test cases results are discussed in detail and compared with experimental data available. The influence of different aspects of a LES method (e.g. resolution, subgrid-scale modelling, wall boundary conditions) are investigated.
Keywords
These keywords were added by machine and not by the authors. This process is experimental and the keywords may be updated as the learning algorithm improves.
Access this chapter
Tax calculation will be finalised at checkout
Purchases are for personal use only
Preview
Unable to display preview. Download preview PDF.
References
Akselvoll, K., Moin, P.: Large Eddy Simulation of Backward Facing Step Flow, Eng. Turbulence Modelling & Experiments 2, ( Rodi et al., eds.), Elsevier Science Publishers B.V., pp. 303–323, (1993).
Beaudan, P., Moin, P.: Numerical Experiments on the Flow past a circular cylinder at a Sub-Critical Reynolds Number, Report No. TF-62, Thermosciences Division, Dept. of Mech. Engineering, Stanford University, (1994).
Breuer, M., Rodi, W.: Large-Eddy Simulation of Turbulent Flow through a Straight Square Duct and a 180° Bend, Fluid Mech. and its Appl., vol. 26, Direct & LES I, Sel. papers f. the First ERCOFTAC Workshop on Direct & LES, Guildford, Surrey, U.K., 27–30 March 1994, ed. Voke, Kleiser & Chollet, Kluwer Acad. pub., (1994).
Breuer, M., Rodi, W.: Large-Eddy Simulation of Turbulent Flow through Straight and Curved Ducts, ERCOFTAC Bulletin, vol. 22, Sept. (1994).
Breuer, M., Pourquie, M., Rodi, W.: Large Eddy Simulation of Internal and External Flows, 3rd International Congress on Industrial and Applied Mathematics, Hamburg, 3–7 July, (1995), to be published in ZAMM, (1996).
Breuer, M., Lakehal, D., Rodi, W.: Flow around a Surface Mounted Cubical Obstacle: Comparison of LES and RANS-Results, accepted for the IMACS-COST Conference on Computational Fluid Dynamics, Three-Dimensional Complex Flows, Lausanne, Switzerland, Sept. 13–15, (1995), to be publ, by Vieweg Verlag.
Breuer, M., Pourquie, M.: First Experiences with LES of Flows past Bluff Bodies, accepted for the 3rd Intern. Symposium of Engineering Turbulence Modeling and Measurements, Crete, Greece, May 27–29, (1996), to be publ, by Elsevier Science B.V..
Brundrett, E., Baines, W.D.: The production and diffusion of vorticity in duct flow, J. Fluid Mech., vol. 19, pp. 375–394, (1964).
Cardell, G.S.: Flow past a circular cylinder with a permeable splitter plate, Ph.D. Thesis, Graduate Aeronautical Lab. California Inst. of Techn. (1993).
Choi, Y.D., Moon, C., Yang, S.H.: Measurements of turbulent flow characteristics of square duct with a 180° bend by hot wire anemometer, Intern. Symposium on Engineering Turbulence Modelling and Measurement, (1990).
Chang, S.M., Humphrey, J.A.C., Modavi, A.: Turbulent flow in a strongly curved U-bend and downstream tangent of square cross-sections, Physico Chemical Hydrodynamics, vol. 4, no. 3, pp. 243–269, (1983).
Demuren, A.O., Rodi, W.: Calculation of turbulence-driven secondary motion in non-circular ducts, J. Fluid Mech., vol. 140, pp. 189–222, (1984).
Gavrilakis, S.: Numerical simulation of low-Reynolds-number turbulent flow through a straight square duct, J. Fluid Mech., vol. 244, pp. 101–129, (1992).
Germano, M.; Piomelli, U.; Moin, P.; Cabot, W. H.: A dynamic subgrid-scale eddy viscosity model, Phys. Fluids A. 3(7), pp. 1760–1765, (1991).
Gessner, F.B., Emery, A.F.: The numerical prediction of developing turbulent flow in rectangular ducts, Trans. ASME I: J. Fluids Engng. 103, pp. 445–455, (1981).
Härtel, C., Kleiser, L.: Large-Eddy Simulation of Near-Wall Turbulence, In this publication, (1996).
Kato, M., Launder, B.E.: The Modeling of Turbulent Flow around Stationary and Vibrating Square Cylinders, Proc. 9th Symp. Turb. Shear Flows, Kyoto, 10–4-1, (1993).
Launder, B.E., Ying, W.M.: Secondary flows in ducts of square cross-section, J. Fluid Mech., vol. 54, pp. 289–295, (1972).
Launder, B.E.: Second-moment closure: present … and future, Lecture Series, Introd. to the Mod. of Turb., von Karman Inst, for Fluid Dyn., Belgium, pp. 282–300, (1991).
Lilly, D.K.: A proposed modification of the Germano subgrid-scale closure method, Phys. Fluids A 4(3), pp. 633–635, (1992).
Manhart, M., Wengle, H.: Large-Eddy Simulation and Eigenmode Decomposition of Turbulent Boundary Layer Flow Over a Hemisphere, In this publication, (1996).
Martinuzzi, R.: Experimentelle Untersuchung der Umströmung wandgebundener, rechtiger, prismatisher Hindernisse, Dissertation, Univ. Erlangen, (1992).
Martinuzzi, R. and Tropea, C.: The Flow around surface-mounted, prismatic obstacle placed in a Fully Developed Channel Flow, J. of Fluids Engineering, vol. 115, (1993).
Norberg, C.: it Effects of Reynolds number and low-intensity free-stream turbulence on the flow around a circular cylinder, Publ. No. 87/2, Dept. of Applied Thermosc. and Fluid Mech. Chalmer Univ. of Techn. Gothenburg, Sweden, (1987).
Rhie, C.M., Chow, W.L.: A numerical study of the turbulent flow past an isolated airfoil with trailing edge separation, AIAA-J., Vol. 21, pp. 1225–1532, (1983).
Son, J., Hanratty, T.J.: Velocity gradients at the wall for flow around a cylinder at Reynolds numbers from 5 × 10 3 to 10 5, J. Fluid Mech. 35, 353–368, (1969).
Rodi, W., Ferziger, J.H., Breuer, M., Pourquié, M.: Status of Large Eddy Simulation: Results of a Workshop, to be published soon, Workshop on LES of Flows past Bluff Bodies, Rottach-Egern, Tegernsee, Germany, June 26–28, (1995).
Schumann, U.: Subgrid-scale model for finite-difference simulations of turbulent flows in plane channels and annuli, J. Comput. Phys., 18, pp. 376–404, (1975).
Smagorinsky, J.: General circulation experiments with the primitive equations, I, The basic experiment, Mon. Weather Rev. 91, pp. 99–165, (1963).
Madabhushi, R.K., Vanka, S.P.: Large eddy simulation of turbulence-driven secondary flow in a square duct, Phys. Fluids A 3(11), pp. 27–34, (1991).
Werner, H., Wengle, H.: Large-Eddy Simulation of Turbulent Flow over and around a Cube in a plate Channel, 8th Symp. on Turb. Shear Flows, ( Schumann et al., eds.), Springer Verlag, (1993).
Author information
Authors and Affiliations
Editor information
Editors and Affiliations
Rights and permissions
Copyright information
© 1996 Friedr. Vieweg & Sohn Verlagsgesellschaft mbH, Braunschweig/Wiesbaden
About this chapter
Cite this chapter
Breuer, M., Rodi, W. (1996). Large Eddy Simulation for Complex Turbulent Flows of Practical Interest. In: Hirschel, E.H. (eds) Flow Simulation with High-Performance Computers II. Notes on Numerical Fluid Mechanics (NNFM), vol 48. Vieweg+Teubner Verlag. https://doi.org/10.1007/978-3-322-89849-4_19
Download citation
DOI: https://doi.org/10.1007/978-3-322-89849-4_19
Publisher Name: Vieweg+Teubner Verlag
Print ISBN: 978-3-322-89851-7
Online ISBN: 978-3-322-89849-4
eBook Packages: Springer Book Archive