Abstract
The paper presents the results of structural and mechanical testing of the alloyed aluminum alloys AA 2024 welded by the FSW process. Investigations were conducted on the welding machine, built on the base of the conventional, vertical milling machine. The goal of the research was to know the relationship between welding parameters and mechanical and microstructural properties of 2024 joints. The following welding parameters were used: the rotation speed of the tool did not change and amounted to 750 rpm, and the welding speed was 73, 116 and 150 mm/min. The welded joints obtained were free of errors and with an acceptable flat surface.
Access this chapter
Tax calculation will be finalised at checkout
Purchases are for personal use only
References
Thomas, W.M., Nicholas, E.D., Needham, J.C., Murch, M.G., Temple-Smith, P., Dawes, C.J.: Friction stir butt welding. GB Patent No. 9125978.8, International Patent Application No. PCT/GB92/02203 (1991)
Ma, Z.Y., Mishra, R.S.: Friction stir welding and processing. Mater. Sci. Eng. 1(1), 1–78 (2005)
Su, J.Q., Nelson, T.W., Mishra, R., Mahoney, M.: Microstructural investigation of friction stir welded 7050-T651 alloy. Acta Mater. 51(3), 713–729 (2003)
Zimmer, S., Langlois, L., Laye, J., Bigot, R.: Experimental investigation of the influence of the FSW plunge processing parameters on the maximum generated force and torque. Int. J. Adv. Manuf. Technol. 47, 201–215 (2010)
Gupta, R.K., Das, H., Pal, T.K.: Influence of processing parameters on induced energy, mechanical and corrosion properties of FSW butt joint of 7475 AA. JMEPEG 21, 1645–1654 (2012)
Hussain, K.: Evaluation of parameters of friction stir welding for aluminium AA6351 alloy. Int. J. Eng. Sci. Technol. 2(10), 5977–5984 (2010)
Dialami, N., Cervera, M., Chiumenti, M.: Numerical modelling of microstructure evolution in friction stir welding (FSW). Metals 8(183), 1–15 (2018). https://doi.org/10.3390/met8030183
AWS D17.3/D17.3 M: 200x: Specification for Friction Stir Welding of Aluminium Alloys for Aerospace Applications, p. 60. An American National Standard, American Welding Society, Miami (2010)
Radisavljević, I., Živković, A., Grabulov, V., Radović, N.: Influence of pin geometry on mechanical and structural properties of butt friction stir welded 2024-T351 aluminum alloy. Hemijska Industrija 69(3), 323–330 (2015)
Perović, M., Baloš, S., Kozak, D., Bajić, D., Vuherer, T.: Influence of kinematic factors of friction stir welding on the characteristics of welded joints of forged plates made of EN AW 7049 a aluminium alloy. Tech. Gazette 24(3), 723–728 (2017)
Vilaça, P., Mendes, J., Nascimento, F., Quintino, L.: Application of FSW to join aluminium foil winding coils for electrical transformers. Int. J. Mech. Syst. Eng. 2(2016), 115 (2016). https://doi.org/10.15344/2455-7412/2016/115
Mijajlović, M., Milčić, D., Milčić, M.: Numerical simulation of friction stir welding. Therm. Sci. 18(3), 967–978 (2014)
Mijajlović, M., Milčić, D., Đurđanović, M., Grabulov, V., Živković, A., Perović, M.: Osnovni pojmovi kod postupka zavarivanja trenjem sa mešanjem prema AWS D17.3/D17.3M: 2010 i ISO 25239-1: 2011. Zavarivanje i zavarene konstrukcije, No. 2, 61–68 (2012)
Mijajlović, M., Stamenković, D., Milčić, D., Đurđanović, M.: Study about friction coefficient estimation in friction stir welding. In: Proceedings of the 7th International Conference on Tribology, Balkantrib, vol. 11, pp. 323–330 (2011)
Mijajlović, M., Milčić, D., Anđelković, B., Vukićević, M., Bjelić, M.: Mathematical model for analytical estimation of generated heat during friction stir welding. Part 1. J. Balk. Tribol. Assoc. 17(2), 179–191 (2011)
Mijajlović, M., Milčić, D., Anđelković, B., Vukićević, M., Bjelić, M.: Mathematical model for analytical estimation of generated heat during friction stir welding. Part 2. J. Balk. Tribol. Assoc. 17(3), 361–370 (2011)
Mijajlović, M., Milčić, D., Stamenković, D., Živković, A.: Mathematical model for generated heat estimation during plunging phase of FSW process. Trans. Famena Faculty Mech. Eng, Naval Archit. Zagreb, Croatia XXXV(1), 39–54 (2011)
Milčić, D., Mijajlović, M., Pavlović, T.N., Vukić, M., Mančić, D.: Temperature based validation of the analytical model for the estimation of the amount of heat generated during friction stir welding. Therm. Sci. 16(Suppl. 2), 337–350 (2012)
Mijajlović, M., Pavlović, T.N., Jovanović, S., Jovanović, D., Milčić, M.: Experimental studies of parameters affecting the heat generation in friction stir welding process. Therm. Sci. 16(Suppl. 2), 351–362 (2012)
Mijajlović, M., Milčić, D.: Analytical model for estimating the amount of heat generated during friction stir welding: application on plates made of aluminium alloy 2024 T351, welding processes. In: Kovacevic, R. (ed.) In Tech. https://doi.org/10.5772/53563 (2012)
Radisavljevic, I., Zivkovic, A., Radovic, N., Grabulov, V.: Influence of FSW parameters on formation quality and mechanical properties of Al 2024-T351 butt welded joints. Trans. Nonferrous Metals Soc. China 23(12), 3525–3539 (2013)
Živković, A., Mijajlović, M., Daşcău, H., Sedmak, A., Radisavljević, I., Milčić, D., Veljić, D.: Influence of the welding tool’s geometry on productivity of friction stir welding process. In: The 5th International Conference Innovative Technologies for Joining Advanced Materials, Timisoara, Romania, Tima, 16–17 June 2011, vol. 11, pp. 1–4 (2011)
Sudhir, K., Pardeep, K.: Effect of parameters of friction stir welding on the impact strength of aluminium 6063. Int. J. Curr. Eng. Technol. 6(3), 993–998 (2016)
Balokhonov, R., Romanova, V., Batukhtina, E., Sergeev, M., Emelianova, E.: A numerical study of the microscale plastic strain localization in friction stir weld zones. Facta Univ. Ser. Mech. Eng. 16(1), 77–86 (2018)
Author information
Authors and Affiliations
Corresponding author
Editor information
Editors and Affiliations
Rights and permissions
Copyright information
© 2019 Springer Nature Switzerland AG
About this paper
Cite this paper
Milcic, M., Vuherer, T., Radisavljevic, I., Milcic, D. (2019). Experimental Investigation of Mechanical Properties on Friction Stir Welded Aluminum 2024 Alloy. In: Mitrovic, N., Milosevic, M., Mladenovic, G. (eds) Experimental and Numerical Investigations in Materials Science and Engineering. CNNTech CNNTech 2018 2018. Lecture Notes in Networks and Systems, vol 54. Springer, Cham. https://doi.org/10.1007/978-3-319-99620-2_4
Download citation
DOI: https://doi.org/10.1007/978-3-319-99620-2_4
Published:
Publisher Name: Springer, Cham
Print ISBN: 978-3-319-99619-6
Online ISBN: 978-3-319-99620-2
eBook Packages: EngineeringEngineering (R0)