Abstract
Vehicle manufacturers are under pressure of reducing fuel consumption and greenhouse gas emissions and still improving safety. One method to reduce the consumption and emissions is to make the vehicles lighter. Several approaches are employed to make cars lighter and yet stronger to ensure safety standards:
-
(1)
to use high strength-to-weight ratio materials (higher strength steels, Aluminum, Magnesium, Carbon Fiber Reinforced Polymers, etc.) and
-
(2)
to reduce the material use wherever possible.
This chapter discusses the material requirements in a car body, steel grades used in automotive industry and introduces the hot stamping process.
Access this chapter
Tax calculation will be finalised at checkout
Purchases are for personal use only
References
N. Asnafi, On strength, stiffness and dent resistance of car body panels. J. Mater. Process. Technol. 49(1), 13–31 (1995)
L. Morello, L.R. Rossini, G. Pia, A. Tonoli, The Automotive Body: Volume I: Components Design. Mechanical Engineering Series (Springer, Netherlands, 2011)
R. Wohlecker, R. Henn, H. Wallentowitz, J. Leyers, Mass reduction. fka Report 56690, fka Aachen (2006)
J. Reed, Advanced High-Strength Steel Technologies in the 2015 Ford Edge. Presented at Great Designs in Steel 2015, May 13, Livonia, MI, USA (2015)
E. Hilfrich, D. Seidner, Crash Safety with High Strength Steels. Presented at International Automotive Congress, Shengyang (2008)
D. Smith, Grand Cherokee. Presented at Great Designs in Steel 2011, May 18, Livonia, MI, USA (2011)
E. Billur, T. Altan, Challenges in forming advanced high strength steels, in Proceedings of New Developments in Sheet Metal Forming Conference, Stuttgart, Germany (2010), pp. 285–304
E. Billur, B. Çetin, M. Gürleyik, New generation advanced high strength steels: developments, trends and constraints. Int. J. Sci. Technol. Res. 2(1), 50–62 (2016)
R. Rana, W. Bleck, S.B. Singh, O.N. Mohanty, Development of high strength interstitial free steel by copper precipitation hardening. Mater. Lett. 61(14–15), 2919–2922 (2007)
J. Dykeman, Advanced high strength steel - recent progress, ongoing challenges, and future opportunities, in International Symposium on New Developments in Advanced High-Strength Sheet Steels. AIST (2013), pp. 15–28
S. Keeler, M. Kimchi, Advanced high-strength steels application guidelines version 5.0. By WorldAutoSteel (2014)
ArcelorMittal, Extract from the product catalogue (2015). Accessed 10 June 2015
Posco, Automotive steel data book (2016)
voestalpine Stahl GmbH, Cold-rolled steel strip, technical terms of delivery. Product Catalogue (2012)
European Committee for Standardization, EN 10325:2006: Steel - Determination of yield strength increase by the effect of heat treatment [Bake-Hardening-Index] (2006)
Y. Okano, H. Shirasawa, Present state and future prospects of high tensile strength steel sheets. Res. Dev. - Kobe 47, 38–41 (1997)
K. Osawa, Y. Suzuki, S. Tanaka, TS590 \(\sim \) 980 MPa| grade low-carbon equivalent type galvannealed sheet steels with superior spot-weldability. Kawasaki Steel Tech. Rep. 48, 9–16 (2003)
R.Z. Mallen, S. Tarr, J. Dykeman, Recent applications of high strength steels in North American Honda production. Presented at Great Designs in Steel 2008, April 9, Livonia, MI, USA (2008)
ArcelorMittal North America, Driving advanced automotive steel solutions (2014)
M. Wilhelm, Materials used in automobile manufacture-current state and perspectives. Le Journal de Physique IV 3(C7), 31–40 (1993)
K. Fredin, Future materials for body structure applications. Presented at Uddeholm Automotive Seminar, Sunne, Sweden (2005)
L. Samek, D. Krizan, Steel–material of choice for automotive lightweight applications. Metal Review (2012), pp. 1–6
W. Wang, X. Wei, The effect of martensite volume and distribution on shear fracture propagation of 600–1000 MPa dual phase sheet steels in the process of deep drawing. Int. J. Mech. Sci. 67, 100–107 (2013)
E. Billur, T. Altan, Three generations of advanced high-strength steels for automotive applications, Part I. Stamp. J. 16–17 (2013)
D.K. Matlock, J.G. Speer, E. De Moor, P.J. Gibbs, Recent developments in advanced high strength sheet steels for automotive applications: an overview. Jestech 15(1), 1–12 (2012)
H.M. Cobb, The History of Stainless Steel (ASM International, 2010)
H. Wilde, H. Hunger, R. Erbe, H. Fuest, Die karosserie des neuen Audi A6. Proc. EuroCarBody 2004, 315–333 (2004)
Dr. Ing. h. c. F. Porsche AG Presse-Datenbank. http://presse.porsche.de
E. Billur, B. Çetin, M.M. Yılmaz, A.G. Oğuz, A. Atay, K. Ersoy, R.O. Uğuz, B. Kaftanoğlu, Forming of new generation AHSS using servo presses, in 5th International Conference on Accuracy in Forming Technologies, Chemnitz, Germany (2015), pp. 175–191
D. Guo, Body light weight and cost control, in Proceedings of the FISITA 2012 World Automotive Congress (Springer, Berlin, 2013), pp. 977–985
J.B. Nam, Development of new auto steels and application technology, in China Automotive Steel Conference, World Steel/CISA (2013)
M. Schneider, M. Gramling, High strength and ductility - a new steel generation for future developments. Presented at Automotive Expo, June 5, Nürnberg, Germany (2013)
K. Lee, Introduction to development and application of automotive steels of Posco, in Posco Gloval EVI Forum (2014)
S. Maggi, C. Federici, F. D’Aiuto, TWIP Steel application on the Fiat Nuova Panda body, in Materials in Car Body Engineering 2012 (2012)
Renault Media Services, http://media.renault.com
Z.C. Xia, AHSS Stamping Project –A/SP 050. Auto/Steel Partnership (2011)
J. Shaw, Development of complex, UHS steels to provide vehicle OEMs with a commercially viable option to meet fuel economy standards. Auto/Steel Partnership (2012)
J. Speer, D. Matlock, E. De Moor, D. Edmonds, Quenching and partitioning: science and technology. Powerpoint presentation (2013), p. 23
G. Thomas, D. Matlock, R. Rana, L. Hector, F. Abu-Farha, ICME 3G AHSS lab heat results supporting DOE targets. Presented at Great Designs in Steel 2015, May 13, Livonia, MI, USA (2015)
Y. Gao, Sustainable steel solutions for Chinese cars. Presented at Green Manufacturing – the Future of Steel and Automobile, November 21, Guangzhou, China (2013)
D. Branagan, Overview of a new category of 3rd generation AHSS. Presented at Great Designs in Steel 2013, May 1, Livonia, MI, USA (2013)
D. Branagan, Launch of a new class of 3rd generation cold formable AHSS. Presented at Great Designs in Steel 2016, May 16, Livonia, MI, USA (2016)
Y. Kang, Synthetic properties and potentialities of future automobile steel. Presented at Green Manufacturing – the Future of Steel and Automobile, November 21, Guangzhou, China (2013)
J.G. Speer, F.C.R. Assunção, D.K. Matlock, D.V. Edmonds, The “quenching and partitioning” process: background and recent progress. Mater. Res. 8(4), 417–423 (2005)
L. Wang, W. Feng, Development and Application of Q&P Sheet Steels (Springer, Berlin, 2011), pp. 255–258
G.A. Thomas, E. De Moor, J.G. Speer, Advanced high strength steel - recent progress, ongoing challenges, and future opportunities. Presented at AIST Symposium, Vail, CO, USA (2013)
G. Hsiung, Advanced high-strength steel stamping – A/SP 050. Auto/Steel Partnership (2012)
H. Du, Y. Li, H. Jie, K. Bai, The automobile steel of the third generation in b-pillar reinforced panel. Eng. Sci. 10(6), 20–22 (2012)
K. Sugimoto, J. Sakaguchi, T. Iida, T. Kashima, Stretch-flangeability of a high-strength TRIP type bainitic sheet steel. ISIJ Int. 40(9), 920–926 (2000)
N. Fonstein, Advanced High Strength Sheet Steels (Springer, Berlin, 2015)
T. Kimura, Formability of trip type banitic ferrite steel sheet. Kobelco Technol. Rev. 30, 85–89 (2011)
S. Jacque, K. Obayashi, Renault and Nissan light weight body engineering strategy. Presented at Strategies in Car Body Engineering 2012, March 21–22, Bad Nauheim, Germany (2012)
T. Kondo, K. Ishiuchi, 1.2GPa advanced high strength steel with high formability, in SAE Technical Paper. (SAE International, 2014), p. 04
D. Coakley, Nissan Murano. Presented at Great Designs in Steel 2015, May 13, Livonia, MI, USA (2015)
ArcelorMittal, Steels for cold stamping -Fortiform> (2014). Accessed 10 June 2015
H. So, D. Faßmann, H. Hoffmann, R. Golle, M. Schaper, An investigation of the blanking process of the quenchable boron alloyed steel 22MnB5 before and after hot stamping process. J. Mater. Process. Technol. 212(2), 437–449 (2012)
H. Engels, O. Schalmin, C. Müller-Bollenhagen, Controlling and monitoring of the hot-stamping process of boron-alloyed heat-treated steels, in The International Conference on New Development in Sheet Metal Forming Technology, Stuttgart, Germany (2006), pp. 135–150
W.D. Callister, D.G. Rethwisch, Fundamentals of Materials Science and Engineering, vol. 21 (Wiley, New York, 2013)
E. Billur, C. Wang, C. Bloor, M. Holecek, H. Porzner, T. Altan, Advancements in tailored hot stamping simulations: cooling channel and distortion analyses. AIP Conf. Proc. 1567(1), 1079–1084 (2013)
T. Kurz, New developments in zinc coated steel for press hardening. Presented at Insight Edition Conference, September 20-21, Gothenburg, Sweden (2011)
T. Kurz, G. Luckeneder, T. Manzenreiter, H. Schwinghammer, A. Sommer, Zinc coated press-hardening steel - challenges and solutions, in SAE Technical Paper. SAE International (2015), p. 04
J. Watkins, Material development. Presented at AP&T Press Hardening, Next Step Seminar, Novi, MI (2011)
S. Sepeur, The company Nano-X GmbH: products for the automotive industry. Presentation at Deutsche Börse, July 10th, Frankfurt, Germany (2006)
ThyssenKrupp Steel Europe, Warmumformung im Automobilbau. Die Bibliothek der Technik (2012)
W. Runge, Technology Entrepreneurship: A Treatise on Entrepreneurs and Entrepreneurship for and in Technology Ventures, vol. 2. KIT Scientific Publishing, Karlsruhe (2014)
I. Martin, M. López, P. Raya, A. Sunden, D. Berglund, K. Isaksson, S. Isaksson, Press systems and methods, US Patent 9,492,859 (2016). Accessed 15 Nov 2016
P. Belanger, Steel innovations in hot stamping, in Great Designs in Steel 2016 (2016)
I.M. Gonzalez, O. Straube, Development of zinc coated parts for hotstamping, in Proceedings of New Developments in Sheet Metal Forming Conference, Stuttgart, Germany (2016), pp. 265–276
Author information
Authors and Affiliations
Corresponding author
Editor information
Editors and Affiliations
Rights and permissions
Copyright information
© 2019 Springer Nature Switzerland AG
About this chapter
Cite this chapter
Billur, E. (2019). Introduction. In: Billur, E. (eds) Hot Stamping of Ultra High-Strength Steels. Springer, Cham. https://doi.org/10.1007/978-3-319-98870-2_1
Download citation
DOI: https://doi.org/10.1007/978-3-319-98870-2_1
Published:
Publisher Name: Springer, Cham
Print ISBN: 978-3-319-98868-9
Online ISBN: 978-3-319-98870-2
eBook Packages: EngineeringEngineering (R0)