Abstract
One of the primary reasons why scanning electron microscopy is hugely popular among scientists is that a large variety of specimens can be examined directly with slight or no sample preparation. This allows fast and convenient analysis of surface topography without the possibility of introducing any artifact into the material. While sample preparation is not a requirement, it does become necessary depending on the type of material examined and the nature of the information that needs to be derived from it. Irrespective of the material analyzed, the sample has to be of dimensions that can be accommodated within the specimen chamber of the SEM, and it also has to be sufficiently conductive to enable grounding of the incoming electron beam. The goal of any sample preparation technique is to reveal the fine details of the surface structure of materials without any alteration or introduction of extraneous elements for eventual examination in the SEM. This chapter is organized on the basis of the types of materials that need to be prepared for analysis in the SEM. These include metals, alloys, ceramics, geological (rocks, minerals) and building materials (cement concrete), polymers, and biological materials. Detailed sample preparation techniques are found in the literature [1, 2].
Change history
09 August 2023
A correction has been published.
References
Elssner G, Helmut H, Gonde K, Wellner P (1999) Ceramics and ceramic composites: materialographic preparation. Elsevier, Amsterdam, p 98
Invitation to the SEM world: for people who are using the SEM for the first time, JEOL Ltd. Tokyo, Japan. https://www.jeolusa.com/RESOURCES/Electron-Optics/Documents-Downloads/EntryId/257
Reed SJB (2005) Electron microprobe analysis and scanning electron microscopy in geology. Cambridge University Press, Cambridge
FHWA, Sample preparation for and examination with the scanning electron microscope, Federal Highway Administration Research and Technology. Coordinating, Developing, and Delivering Highway Transportation Innovations, 2006
Marusin SEA (1995) Sample Preparation - the Key to SEM Studies of Failed Concrete. Cement Concrete Comp 17(4):311–318
Shah VS (2004) Detection of microcracks in concrete cured at elevated temperature, MS Thesis. University of Florida, School of Building Construction, Florida, USA
Sas LEA (1990) A note on the preparation of clinker and cement paste samples for scanning electron microscopy. Cem Concr Res 20:159–116
Sawyer L, Grubb D, Meyers G (2008) Polymer microscopy, 3rd edn. Springer, New York
William D. Callister and David G. Rethwisch (2009), Materials science and engineering: an introduction, Eighth Edition, John Wiley and Sons, NJ, USA
Michler GH (2008) Electron microscopy of polymers. Springer, Berlin
Sulchek T, Yaralioglu GG, Quate CF, Minne SC (2002) Characterization and optimization of scan speed for tapping-mode atomic force microscopy. Rev Sci Instrum 73(8):2928
Goldstein J, Newbury D, Joy D, Lyman C, Echlin P, Lifshin E, Sawyer L, Michael J (2003) Scanning electron microscopy and x-ray microanalysis, vol 1. Springer, New York
Sawyer LC, Grubb DT, Meyers GF (2008) Polymer microscopy, 3rd edn. Springer, New York
Kaláb M, Yang A, Chabot D (2008) Conventional scanning electron microscopy of bacteria. Infocus (10):44–61
Stimpfl T, Muller K, Gergov M, LeBeau M, Polettini A, Sporkert F, Weinmann W (2012) Recommendations on sample preparation of biological specimens for systematic toxicological analysis. In: Committee of systematic toxicological analysis,– the international association of forensic toxicologist TIAFT bulletin XLI, vol 2. Seville, Spain, pp 1–11
Kashi AM, Tahermanesh K, Chaichian S, Joghataei MT, Moradi F, Tavangar SM, Lotfibakshaiesh N, Beyranvand SP, Anvari-Yazdi AF, Abed SM (2014) How to prepare biological samples and live tissues for scanning electron microscopy (SEM). Galen Medical Journal 3(2):63–80
Goldstein J et al (2003) Scanning electron microscopy and x-ray microanalysis, 3rd edn. Kluwer, New York
Leng Y (2008) Materials characterization: introduction to microscopic and spectroscopic methods. Wiley, Hoboken
Egerton RF, Li P, Malac M (2004) Radiation damage in the TEM and SEM. Micron 35(6):399–409. https://doi.org/10.1016/j.micron.2004.02.003
Glaeser RM (1971) Limitations to significant information in biological electron microscopy as a result of radiation damages. J Ultrastruct Res 36:466–482
Moran P, Coats B (2012) Biological sample preparation for SEM imaging of porcine retina. Micros Today 20(02):28–31. https://doi.org/10.1017/S1551929511001374
Bozzola JJ, Russell LD (2002) Electron microscopy. Jones and Bartlett Publishers, Sudbury
Fox CH, Johnson FB, Whiting J, Roller PP (1985) Formaldehyde fixation. J Histochem Cytochem 33(8):845–853. https://doi.org/10.1152/ajpgi.00048.2011
Migneault I, Dartiguenave C, Bertrand MJ, Waldron KC (2004) Glutaraldehyde: behavior in aqueous solution, reaction with proteins, and application to enzyme crosslinking. BioTechniques 37(5):790–802. https://doi.org/10.2144/3705A0790
Sinz A (2006) Chemical cross-linking and mass spectrometry to map three-dimensional protein structures and protein–protein interactions. Mass Spectrom Rev 25(4):663–682. https://doi.org/10.1002/mas.20082
Vanhecke D, Graber W, Studer D (2010) Rapidly excised and cryofixed rat tissue. In: Methods in cell biology, vol 96. Elsevier. https://doi.org/10.1016/S0091-679X(10)96021-4
Sivakumar S, Khatiwada CP, Sivasubramanian J (2014) Studies the alterations of biochemical and mineral contents in bone tissue of mus musculus due to aluminum toxicity and the protective action of desferrioxamine and deferiprone by FTIR, ICP-OES, SEM and XRD techniques. Spectrochim Acta A 126:59–68. https://doi.org/10.1016/j.saa.2014.01.136
Saunders R, Amoroso M (2010) SEM investigation of heart tissue samples. J Phys Conf Ser 241:012023. https://doi.org/10.1088/1742-6596/241/1/012023
Ozen A, Sancak IG, Tiryaki M, Ceylan A, Alparslan Pinarli F, Delibaşi T (2014) Mesenchymal stem cells (Mscs) in scanning electron microscopy (SEM) world. Niche Journal 2(2):22–24. https://doi.org/10.5152/niche.2013.162
Parameswaran S, Verma RS (2011) Scanning electron microscopy preparation protocol for differentiated stem cells. Anal Biochem 416(2):186–190. https://doi.org/10.1016/j.ab.2011.05.032
Seviour RJ, Pethica LM, McClure S (1984) A simple modified procedure for preparing microbial cells for scanning electron microscopy. J Microbiol Methods 3:1–5. https://doi.org/10.1016/0167-7012(84)90038-1
Barbosa P (2015) Insect histology: practical laboratory techniques. Wiley-Blackwell, Chichester, p 2015
Author information
Authors and Affiliations
Rights and permissions
Copyright information
© 2018 Springer Nature Switzerland AG
About this chapter
Cite this chapter
Ul-Hamid, A. (2018). Sample Preparation. In: A Beginners' Guide to Scanning Electron Microscopy. Springer, Cham. https://doi.org/10.1007/978-3-319-98482-7_8
Download citation
DOI: https://doi.org/10.1007/978-3-319-98482-7_8
Published:
Publisher Name: Springer, Cham
Print ISBN: 978-3-319-98481-0
Online ISBN: 978-3-319-98482-7
eBook Packages: Chemistry and Materials ScienceChemistry and Material Science (R0)