Abstract
In the present paper, an experimental analysis of the PV modules efficiency of different photovoltaic comprising monocrystalline silicon, polycrystal-line silicon and thin-film silicon technologies has been made. The PV modules were first subjected to thorough indoor evaluation (Sun simulator, Electroluminescence) to check the real characteristics and internal defects that make the effectiveness of these modules lower compared to characteristics declared by the manufacturer under the terms of DIN EN ISO/IEC 17025:2005. Results of the first analysis have been taken as a reference for the second part, which consist of ex-posing the PV modules to various natural factors in outdoor environment (solar radiation, temperature, wind, humidity…) versus time. Then, using the peak power measuring device PVPM, different electrical characteristics of the photovoltaic module during the exposure in operating site were determined. Significant differences in the energy efficiency of PV modules have been presented. The analysis of the photovoltaic efficiency has allowed a better comparison between PV technologies better for a specific environment (semi-humid region).
Access this chapter
Tax calculation will be finalised at checkout
Purchases are for personal use only
References
Perlin, J.: From Space to Earth, the Story of Solar Electricity. Earthscan (1999)
Villoz, A.L.-M.: énergie solaire photovoltaïque: le manuel du professionnel. Dunod (2003)
Labouret, A., Villoz, M.: Energie solaire photovoltaïque-4ème édition. Dunod (2009)
Tiwari, G.N., Dubey, S.: Fundamentals of photovoltaic modules and their applications. Royal Society of Chemistry (2009)
Skoplaki, E., Palyvos, J.A.: On the temperature dependence of photovoltaic module electrical performance: A review of efficiency/power correlations. Sol. Energy 83(5), 614–624 (2009)
Cañete, C., Carretero, J., Sidrach-de-Cardona, M.: Energy performance of different photovoltaic module technologies under outdoor conditions. Energy 65, 295–302 (2014)
Belkaid, A., Colak, I., Isik, O.: Photovoltaic maximum power point tracking under fast varying of solar radiation. Appl. Energy 179, 523–530 (2016)
Schweiger, M., et al.: Understanding the energy yield of photovoltaic modules in different climates by linear performance loss analysis of the module performance ratio. IET Renew. Power Gener. 11(5), 558–565 (2017)
King, D.L., et al.: Photovoltaic module performance and durability following long-term field exposure. AIP Conf. Proc. 462(1), 565–571 (1999)
Wohlgemuth, J.H., et al.: Long term reliability of photovoltaic modules. In: IEEE 4th World Conference on Photovoltaic Energy Conversion, Conference Record of the 2006, vol. 2, pp. 2050–2053. IEEE (2006)
Mani, M., Pillai, R.: Impact of dust on solar photovoltaic (PV) performance: research status, challenges and recommendations. Renew. Sustain. Energy Rev. 14(9), 3124–3131 (2010)
Jorgensen, G.J., et al.: Moisture transport, adhesion, and corrosion protection of PV module packaging materials. Sol. Energy Mater. Sol. Cells 90(16), 2739–2775 (2006)
Quintana, M.A., et al.: Commonly observed degradation in field-aged photovoltaic modules. In: Conference Record of the Twenty-Ninth IEEE Photovoltaic Specialists Conference, pp. 1436–1439. IEEE (2002)
Jordan, D.C., Kurtz, S.R.: Photovoltaic degradation rates—an analytical review. Prog. Photovoltaics Res. Appl. 21(1), 12–29 (2013)
Mahammed, I.H., et al.: Outdoor study of partial shading effects on different PV modules technologies. Energy Procedia 141, 81–85 (2017)
Bana, S., Saini, R.P.: Experimental investigation on power output of different photovoltaic array configurations under uniform and partial shading scenarios. Energy 127, 438–453 (2017)
Wagner, A.: Peak-power and internal series resistance measurement under natural ambient conditions. In: Proceedings EuroSun, vol. 5, (2000)
Bendel, C., Wagner, A.: Photovoltaic measurement relevant to the energy yield. In: Proceedings of 3rd World Conference on Photovoltaic Energy Conversion, vol. 3, pp. 2227–2230. IEEE (2003)
Schulte, K.M., Wagner, A.: Die Effektive Solarzellenkennlinie.-Anwendung in der Teillast-Berechnung. In: Proceedings, vol. 17 (2002)
Jorgensen, G.J., McMahon, T.J.: Accelerated and outdoor aging effects on photovoltaic module interfacial adhesion properties. Prog. Photovoltaics Res. Appl. 16(6), 519–527 (2008)
ISO, BSEN: IEC 17025: 2005 General requirements for the competence of testing and calibration laboratories. ICS, vol. 3 (2005)
Alonso-Garcia, M.C., Ruiz, J.M., Chenlo, F.: Experimental study of mismatch and shading effects in the I-V characteristic of a photovoltaic module. Sol. Energy Mater. Sol. Cells 90(3), 329–340 (2006)
Crozier, F.J.J.L., van Dyk, E.E., Vorster, F.J.: high resolution spatial electroluminescence imaging of photovoltaic modules. Vor. Nelson Mand. Metrop. Univ (2009)
Rau, U.: Reciprocity relation between photovoltaic quantum efficiency and electroluminescent emission of solar cells. Phys. Rev. B 76(8), 085303 (2007)
International Electrotechnical Commission. “Photovoltaic Devices-Part 1: Measurement of photovoltaic current-voltage characteristics. IEC 60904-1 (2006)
Osterwald, C.R., et al.: Comparison of degradation rates of individual modules held at maximum power. In: Conference Record of the 2006 IEEE 4th World Conference on Photovoltaic Energy Conversion, vol. 2, pp. 2085–2088. IEEE (2006)
Tina, G.M., Abate, R.: Experimental verification of thermal behaviour of photovoltaic modules. In: The 14th IEEE Mediterranean Electrotechnical Conference. MELECON 2008, pp. 579–584. IEEE (2008)
Acknowledgement
The authors would like to thank Prof. Dr. Gerhard Gobsch to have initiated this project.
Author information
Authors and Affiliations
Corresponding author
Editor information
Editors and Affiliations
Rights and permissions
Copyright information
© 2019 Springer Nature Switzerland AG
About this paper
Cite this paper
Lalaoui, L. et al. (2019). Indoor and Outdoor Measurements of PV Module Performance of Different Manufacturing Technologies. In: Chadli, M., Bououden, S., Ziani, S., Zelinka, I. (eds) Advanced Control Engineering Methods in Electrical Engineering Systems. ICEECA 2017. Lecture Notes in Electrical Engineering, vol 522. Springer, Cham. https://doi.org/10.1007/978-3-319-97816-1_18
Download citation
DOI: https://doi.org/10.1007/978-3-319-97816-1_18
Published:
Publisher Name: Springer, Cham
Print ISBN: 978-3-319-97815-4
Online ISBN: 978-3-319-97816-1
eBook Packages: Intelligent Technologies and RoboticsIntelligent Technologies and Robotics (R0)