Abstract
The use of phase change materials (PCM) in the buildings is a possibility to achieve the reduction of energy dependency as it allows the use of latent heat storage to increase the thermal inertia without significantly increasing the building weight.
Access this chapter
Tax calculation will be finalised at checkout
Purchases are for personal use only
References
J. Kosny, T. Stovall, S. Shrestha, D. Yarbrough, Theoretical and experimental thermal performance analysis of complex thermal storage membrane containing bio-based phase-change material (PCM). Proc. Build. XI, 1–13 (2010)
B. Zalba, J.M. Marín, L.F. Cabeza, H. Mehling, Review on thermal energy storage with phase change materials, heat transfer analysis and applications. Appl. Therm. Eng. 23, 251–283 (2003)
H. Mehling, L.F. Cabeza, Heat and Cold Storage with PCM. An Up To Date Introduction into Basics and Application (Springer, Berlin, 2008)
C.A.P. Santos, L. Matias, Coeficientes de Transmissão Térmica de Elementos da Envolvente dos Edifícios. ICT Informações Cientificas e Técnicas, Edifícios - Ite 50, Edited by Laboratório Nacional de Engenharia Civil. LNEC, Lisboa (2007)
Y. Zhang, G. Zhou, K. Lin, Q. Zhang, H. Di, Application of latent heat thermal energy storage in buildings: State-of-the-art and outlook. Build. Environ. 42, 2197–2209 (2007)
S. Monteiro da Silva, M. Almeida, Using PCM to Improve Building’s Thermal Performance. 2nd International Conference on Sustainable Energy Storage, 19–21 June, Trinity College Dublin, Ireland
S. Scalat, D. Banu, D. Hawes, J. Paris, F. Haghighata, D. Feldman, Full scale thermal testing of latent heat storage in wallboard. Solar Energy Mater Solar Cells 44, 49–61 (1996)
R.J. Kedl, T.K. Stovall, Activities in Support of the Wax-Impregnated Wallboard Concept. US Department of Energy: Thermal Energy Storage Researches Activity Review, New Orleans, LA, USA (1989)
D.A. Neeper, Solar Buildings Research: What Are the Best Directions? 213–219 (1986)
V. Tyagi, D. Buddhi, PCM thermal storage in buildings: a state of art. Renew. Sustain. Energy 11, 1146–1166 (2007)
B. Farouk, S.I. Guceri. Tromb–Michal Wall Using a Phase Change Material (1979)
K. Peippo, P. Kauranen, P.D. Lund, Multicomponent PCM Wall Optimized for Passive Solar Heating. Energy Build. 17, 259–270 (1991)
D. Feldman, D. Banu, D. Hawes, E. Ghanbari, Obtaining an energy storing building material by direct incorporation of an organic phase change material in gypsum wallboard. Solar Energy Materials 22, 231–242 (1991)
D. Feldman, M.A. Khan, D. Banu, Energy Storage Composite with an Organic Phase Change Material (1989), pp. 333–341
D. Feldman, M. Shapiro, D. Banu, C.J. Fuks, Fatty Acids and Their Mixtures as Phase Change Materials for Thermal Energy Storage (1989), pp. 201–216
M.M. Shapiro, D. Feldman, D. Hawes, D. Banu, PCM Thermal Storage in Wallboard (1987), pp. 48–58
M.M. Shapiro, Development of the Enthalpy Storage Materials, Mixture of Methyl Stearate and Methyl Palmitate (1989)
D.W. Hawes, D. Feldman, D. Banu, Latent heat storage in building materials. Energy Build. 20, 77–86 (1993)
D.A. Neeper, Potential Benefits of Distributed PCM Thermal Storage. Proceedings of the 14th National Passive Solar Conference, 19–22 June 1989, Denver, pp. 283–288
D.A. Neeper, Thermal dynamics of wallboard with latent heat storage. Sol. Energy 68, 393–403 (2000)
D. Heim, J.A. Clarke, Numerical modelling and thermal simulation of PCM–gypsum com-posites with ESP-r. Energy Build. 36(8), 795–805 (2004)
J. Paris, M. Falardeau, C. Villeneuve, Thermal storage by latent heat: a viable option for energy conservation in buildings. Energy Sources 15, 85–93 (1993)
A.E. Rudd, Phase change material wallboard for distributed storage in buildings. Trans.-Am. Soc. Heating Refrigerating Air Conditioning Eng. 339–346 (1993)
M.W. Babich, R. Benrashid R, R.D. Mounts, DSC studies of new energy storage materials. Part 3. Thermal and flammability studies. Thermochimica Acta, 193–200 (1994)
D. Banu, D. Feldman, F. Haghighat, J. Paris, D. Hawes, Energy-storing wallboard: flammability tests. J. Mat. Civil Eng. 10, 98–105 (1998)
F. Kuznik, J. Virgone, Experimental investigation of wallboard containing phase change material: data for validation of numerical modeling. Energy Build. 41, 561–570 (2009)
A. Oliver, Thermal characterization of gypsum boards with PCM included: thermal energy storage in buildings through latent heat. Energy Build. 48, 1–7 (2012)
H. Liu, B.A. Hanzim, Performance of phase change material boards under natural convection. Build. Environ. 44, 1788–1793 (2009)
L. Shilei, F. Guohui, Z. Neng, D. Li, Experimental study and evaluation of latent heat storage in phase change materials wallboards. Energy Build. 39, 1088–1091 (2007)
L. Shilei, F. Guohui, Z. Neng, Impact of phase change wall room on indoor thermal environment in winter. Energy Build. 38, 18–24 (2006)
C. Voelker, O. Kornadt, M. Ostry, Temperature reduction due to the application of phase change materials. Energy Build. 937–944 (2008)
F. Kuznik, J. Virgone, K. Johannes, In-situ study of thermal comfort enhancement in a renovated building equipped with phase change material wallboard. Renew. Energy 1458–1462 (2011)
F. Kuznik, J. Virgone, Experimental assessment of phase change material for wall building use. Appl. Energy 86, 2038–2046 (2009)
A. Athienitis, C. Liu, D. Hawes, D. Banu, D. Feldman, Investigation of the thermal performance of a passive solar test-room with wall latent heat storage. Build. Environ. 405–410 (1997)
P. Schossig, H.M. Henning, S. Gschwander, T. Haussmann, Microencapsulated phase-change materials integrated into construction materials. Sol. Energy Mater. Sol. Cells 89(2–3), 297–306 (2005)
S.G. Jeong, S.J. Chang, W. Seunghwan, J. Lee, S. Kim, Energy performance evaluation of heat-storage gypsum board with hybrid SSPCM composite. J. Indus. Eng. Chem 237–243 (2017)
B. Chhugani, F. Klinker, H. Weinlaeder, M. Reim, Energetic performance of two different PCM wallboards and their regeneration behavior in office rooms. Energy Procedia 122, 625–630 (2017)
M. Pomianowski, P. Heiselber, Y. Zhang, Review of thermal energy storage technologies based on PCM application in buildings. Energy Build. 67, 56–69 (2013)
I. Cerón, J. Neila, M. Khayet, Experimental tile with phase change materials (PCM) for building use. Energy Build. 43, 1869–1874 (2011)
D.C. Hittle, Phase Change Materials in Floor Tiles for Thermal Energy Storage (2002)
R. Novais, G. Ascensão, M.P. Seabra, J.A. Labrincha, Lightweight dense/porous PCM-ceramic tiles for indoor temperature control. Energy Build. 108, 205–214 (2015)
T.C. Ling, C.S. Poon, Use of phase change materials for thermal energy storage in concrete: an overview. Construct. Build. Mat. 55–62 (2013)
L.F. Cabeza, C. Castellón, M. Nogués, M. Medrano, R. Leppers, O. Zubillaga, Use of mi-croencapsulated PCM in concrete walls for energy savings. Energy Build. 113–119 (2007)
G. Zhou, M. Pang, Experimental investigations on the performance of a collector–storage wall system using phase change materials. Energy Convers. Manag. 178–188 (2015)
A.K. Sharma, N.K. Bansal, M.S. Sodha, V. Gupta, Vary-therm wall for cooling/heating of buildings in composite climate. Int. J. Energy Res. 733–739 (1989)
L. Zalewski, M. Chantant, S. Lassue, B. Duthoit, Experimental thermal study of a solar wall of composite type. Energy Build. 7–18 (1997)
L. Zalewski, S. Lassue, B. Duthoit, M. Butez, Study of solar walls, validating a simulation model. Build. Environ. 109–112 (2002)
J. Jie, Y. Hua, H. Wei, P. Gang, L. Jianping, J. Bin, Modeling of a novel Trombe wall with PV cells.2007. Build. Environ. 1544–1552 (2007)
L. Zalewski, A. Joulin, S. Lassue, Y. Dutil, D. Rousse, Experimental study of small-scale solar wall integrating phase change material. Solar Energy 208–219 (2012)
E. Leang, P. Tittelein, L. Zalewski, S. Lassue, Numerical study of a composite Trombe solar wall integrating microencapsulated PCM. Energy Procedia 122, 1009–1014 (2017)
F. Stazi, C. Bonfigli, E. Tomassoni, C. Di Perna, P. Munafò, The effect of high thermal insulation on high thermal mass: is the dynamic behaviour of traditional envelopes in Mediterranean climates still possible? Energy Build. 367–383 (2015)
J. Onishi, H. Soeda, M. Mizuno, Numerical study on a low energy architecture based upon distributed heat storage system. Renew. Energy 61–66 (2001)
U. Stritih, P. Novak, Solar heat storage wall for building ventilation. Renew. Energy 268–271 (1996)
H. Manz, P.W. Egolf, P. Suter, A. Goetzberger, TIM-PCM external wall system for solar space heating and daylighting. Solar Energy 369–379 (1997)
Telkes M. Trombe wall with phase change storage material. 1978
M. Telkes, Thermal energy storage in salt hydrates. Solar Mat. Sci. 381–393 (1980)
Telkes M. Thermal storage for solar heating and cooling. 1975
G.L. Askew, Solar Heating Utilization A Paraffin’s Phase Change Material (1978)
C.J. Swet, Phase Change Storage in Passive Solar Architecture (1980), pp 282–286
A.A. Ghoneim, S.A. Kllein, J.A. Duffie, Analysis of collector—storage building walls using phase change materials. Solar Energy 237–242 (1991)
S. Chandra, R. Kumar, S. Kaushik, S. Kaul, Thermal performance of a non-A/C building with PCM thermal storage wall. Energy Convers. Manage. 15–20 (1985)
T. Knowles, Proportioning composites for efficient thermal storage walls. Solar Energy 319–326 (1983)
L. Bourdeau, A. Jaffrin, Actual Performance of a Latent Heat Diode Wall (1979)
L. Bourdeau, A. Jaffrin, A. Moisan, Captage et Stockage d’ànergie Solaire dans l’Habitat par le Moyen de Mur Diode à Chaleur Latente 559–568 (1980)
L. Bourdeau, Utilisation d’un Materiau à Changement de Phase Dans un Mur Trombe sans Thermocirculation (1982), pp 633–642
D.K. Benson, J.D. Webb, R.W. Burrows, J.D.O. McFadden, C. Christensen (1985) Materials Research for Passive Solar Systems: Solid State Phase-Change Materials (1985)
D. Buddhi, S.D. Sharma, Measurements of transmittance of solar radiation through stearic acid: latent heat storage material. Energy Convers. Manag. 1979–1984 (1999)
U. Stritih, P. Novak, Solar heat storage wall for building ventilation, In: World renewable energy congress (WREC). Renew. Energy. 268–271 (1996)
D. Sun, L. Wang, Research on heat transfer performance of passive solar collector-storage wall system with phase change materials. Energy Build. 199, 183–188 (2016)
F. Fiorito, Trombe walls for lightweight buildings in temperate and hot climates: exploring the use of phase-change materials for performances improvement. Energy Procedia 1110–1119 (2012)
Y.A. Kara, A. Kurnuc, Performance of coupled novel triple glass and phase change material wall in the heating season: an experimental study. Solar Energy 2432–2442 (2012)
Y.C. Li, S.L. Liu, Experimental study on thermal performance of a solar chimney combined with PCM. Appl. Energy 114, 172–178 (2014)
Hu Z, He W, Ji J, Zhang S, Hu Z, He W, A review on the application of Trombe wall system in buildings. Renew. Sustain. Energy Rev. 976–987 (2017)
Silva Tiago, Vicente Romeu, Rodrigues Fernanda, Literature review on the use of phase change materials in glazing and shading solutions. Renew. Sustain. Energy Rev. 53, 515–535 (2016)
F. Cappelletti, A. Prada, P. Romagnoni, A. Gasparella, Passive performance of glazed components in heating and cooling of an open-space office under controlled indoor thermal comfort. Build. Environ. 131–144 (2014)
K.A.R. Ismail, C.T. Salinas, J.R. Henriquez, Comparison between PCM filled glass windows and absorbing gas filled windows. Energy Build. 710–719 (2008)
http://www.inglas.eu/glass/company.html. Accessed 17.11.2017
F. Goia, M. Perino, V. Serra, Improving thermal comfort conditions by means of PCM glazing systems. Energy Build. 442–452 (2013)
L. Jain, S.D. Sharma, Phase change materials for day lighting and glazed insulation in buildings. J. Eng. Sci. Technol. 322–327 (2009)
H. Weinläder, A. Beck, J. Fricke, PCM-facade-panel for daylighting and room heating. Solar Energy 177–186 (2005)
F. Goia, M. Perino, V. Serra, Experimental analysis of the energy performance of a full-scale PCM glazing prototype. Solar Energy 217–233 (2014)
S. Grynning, F. Goia, E. Rognvik, B. Time, Possibilities for characterization of a PCM window system using large scale measurements. Int. J. Sustain. Built. Environ. 56–64 (2013)
S.E. Kalnæs, B.P. Jelle, Phase change materials and products for building applications: a state-of- the-art review and future research opportunities. J. Sustain. Built Environ. 94, 150–176 (2015)
Alawadhi E.M, Using phase change materials in window shutter to reduce the solar heat gain. Energy Build. 421–429 (2012)
D. Buddhi. H.S. Mishra, A. Sharma, Thermal performance studies of a test cell having a PCM window in south direction. IEA, ECESIA Annex 17 (2003)
Mehling Harald, Strategic Project ‘‘Innovative PCM-Technology’’—Results and Future Perspectives, 8th Expert Meeting and Work Shop (Kizkalesi, Turkey, 2004)
N. Soares, J.J. Costa, A. Samagaio, R. Vicente, Numerical evaluation of a phase change material—shutter using solar energy for winter nighttime indoor heating. J. Build. Phys. 367–394 (2014)
L. Shuhong, S. Gaofeng, Z. Kaikai, Z. Xiaosong, Experimental research on the dynamic thermal performance of a novel triple-pane building window filled with PCM. Sustain. Cities. Soc. 15–22 (2016)
C. Liu, Y. Zheng, D. Li, H. Qi, X. Liu, A model to determine thermal performance of a non-ventilated double glazing unit with PCM and experimental validation. Procedia Eng. 293–300 (2016)
G.M. Gomes, A.J. Santos, M.A. Rodrigues. Solar and visible optical properties of glazing systems with venetian blinds: numerical, experimental and blind control study. Build. Environ. 47–59 (2014)
Silva Tiago, Vicente Romeu, Amaral Cláudia, Figueiredo António, Thermal performance of a window shutter containing PCM: Numerical validation and experimental analysis. Appl. Energy 179, 515–535 (2016)
Silva Tiago, Vicente Romeu, Rodrigues Fernanda, Samagaio António, Development of a window shutter with phase change materials: full scale outdoor experimental approach. Energy Build. 88, 110–121 (2015)
Silva Tiago, Vicente Romeu, Soares Nelson, Ferreira Victor, Experimental testing and numerical modelling of masonry wall solution with PCM incorporation: a passive con-struction solution. Energy Build. 49, 235–245 (2012)
Silva Tiago, Vicente Romeu, Amaral Cláudia, Samagaio António, Cardoso Claudino, Performance of a window shutter with phase change material under summer Mediterranean climate conditions. Appl. Therm. Eng. 84, 246–256 (2015)
A. Castell, I. Martorell, M. Medrano, G. Pérez, L.F. Cabeza, Experimental study of using PCM in brick constructive solutions for passive cooling. Energy Build. 42, 534–540 (2010)
A.V. Sá, M. Azenha, H. Sousa, A. Samagaio, Thermal enhancement of plastering mortars with phase change materials: experimental and numerical approach. Energy Build. 49, 16–27 (2012)
H.J. Alqallaf, E.M. Alawadhi, Concrete roof with cylindrical holes containing PCM to reduce the heat gain 73–80 (2013)
L. Royon, L. Karim, A. Bontemps, Thermal energy storage and release of a new compo-nent with PCM for integration in floors for thermal management of buildings. Energy Build. 63, 29–35 (2013)
X. Xu, Y. Zhang, K. Ling, H. Di, R. Yang, Modeling and simulation on thermal performance of shape-stabilized phase change material floor used in passive solar buildings. Energy Build. 37, 1084–1091 (2005)
A.G. Entrop, H.J.H. Brouwers, A.H.M.E. Reinders, Experimental research on the use of micro-encapsulated phase change materials to store solar energy in concrete floors and to save energy in Dutch houses. Sol. Energy 85, 1007–1020 (2011)
L. Royon, L. Karim, A. Bontemps, Thermal energy storage and release of a new component with PCM for integration in floors for thermal management of buildings. Energy Build. 63, 29–35 (2013)
L. Royon, L. Karim, A. Bontemps, Optimization of PCM embedded in a floor panel developed for thermal management of the lightweight envelope of buildings. Energy Build. 82, 385–390 (2014)
R. Ansuini, R. Larghetti, A. Giretti, M. Lemma, Radiant floors integrated with PCM for indoor temperature control. Energy Build. 43, 3019–3026 (2011)
K.L. Huang, G.H. Feng, J.S. Zhang, Experimental and numerical study on phase change material floor in solar water heating system with a new design. Sol. Energy 105, 126–138 (2014)
G.B. Zhou, J. He, Thermal performance of a radiant floor heating system with different heat storage materials and heating pipes. Appl. Energ. 138, 648–660 (2015)
M. Zhao, T.T. Zhu, C.N. Wang, H. Chen, Y.W. Zhang, Numerical simulation on the thermal performance of hydraulic floor heating system with phase change materials. Appl. Therm. Eng. 93, 900–907 (2016)
Y. Xia, X.S. Zhang, Experimental research on a double-layer radiant floor system with phase change material under heating mode. Appl. Therm. Eng. 96, 600–606 (2016)
J.F. Belmonte, P. Eguía, A.E. Molina, J.A. Almendros-Ibáñez, Thermal simulation and system optimization of a chilled ceiling coupled with a floor containing a phase change material (PCM). Sustain. Cities Soc. 14, 154–170 (2015)
A. Pasupathy, R. Velraj, Effect of double layer phase change material in building roof for year round thermal management. Energy Build. 40, 193–203 (2008)
J. Kosny, K. Biswas, W. Miller, S. Kriner, Field thermal performance of naturally ventilated solar roof with PCM heat sink. Sol. Energy 86, 2504–2514 (2012)
M. Koschenz, B. Lehmann, Development of a thermally activated ceiling panel with PCM for application in lightweight and retrofitted buildings. Energy Build. 36, 567–578 (2004)
H. Weinläder, W. Körner, B. Strieder, A ventilated cooling ceiling with integrated latent heat storage—Monitoring results. 65–72 (2014)
J. Kosny, E. Kossecka, A. Brzezinski, A. Tleoubaev, D. Yarbrough, Dynamic thermal performance analysis of fiber insulations containing bio-based phase change materials (PCMs) 122–131 (2012)
Y. Lei, X. Zhang, G. Xu, Thermal performance of a solar storage packed bed using spherical capsules filled with PCM having different melting points. Energy Build. 68, 639–646 (2014)
Xing Jin, Shuanglong Zhang, Xu Xiaodong, Xiaosong Zhang, Effects of PCM state on its phase change performance and the thermal performance of building walls. Build. Environ. 81, 334–339 (2014)
M.A. Izquierdo-Barrientos, J.F. Belmonte, D. Rodríguez-Sánchez, A.E. Molina, J.A. Al-mendros- Ibáñez, A numerical study of external building walls containing phase change materials (PCM). Appl. Therm. Eng. 47, 73–85 (2012)
Kuznik Frédéric, Virgone Joseph, Experimental assessment of a phase change material for wall building use. Appl. Energy 86, 2038–2046 (2009)
G. Evola, L. Marletta, The effectiveness of PCM wallboards for the energy re-furbishment of lightweight buildings. Energy Procedia 62, 13–21 (2014)
Jin Xing, Zhang Shuanglong, Effects of PCM state on its phase change performance and the thermal performance of building walls. Build. Environ. 81, 334–339 (2014)
N. Sarier, E. Onder, Organic phase change materials and their textile applications: an overview. Thermochim 7–60 (2012)
K. Horikiri, Y. Yao, J. Yao, Numerical optimization of thermal comfort improvement for indoor environment with occupants and furniture 303–315 (2015)
X. Yang, P. Fazio, H. Ge, J. Rao, Evaluation of moisture buffering capacity of interior surface materials and furniture in a full-scale experimental investigation, 188–196 (2012)
L.H. Mortensen, C. Rode, R. Peuhkuri, Investigation of airflow patterns in a microclimate by particle image velocimetry (PIV), 1929–1938 (2008)
M. Corcione, L. Fontana, G. Moncada Lo Giudice, A parametric analysis on the effects of furnishings upon the performance of radiant floor-panel heating systems 59–68 (2000)
M.Z. Pomianowski, F. Khalegi,G. Domarks, J. Taminskas, K. Bandurski, K.K. Madsen, et al. Experimental investigation of the influence of obstacle in the room on passive night-time cooling using displacement ventilation 499–506 (2011)
L. Fontana, Thermal performance of radiant heating floors in furnished enclosed spaces 1547–1555 (2011)
J. Le Dréau, Energy flow and thermal comfort in buildings—comparison of radiant and air-based heating and cooling systems (2014)
K.A. Antonopoulos, E.P. Koronaki, Effect of indoor mass on the time constant and thermal delay of buildings 391–402 (2000)
J. Yam, Y. Li, Z. Zheng, Nonlinear coupling between thermal mass and natural ventilation in buildings, 1251–1264 (2003)
H. Wolisz, T.M. Kull, R. Streblow, D. Müller, The Effect of Furniture and Floor Covering upon Dynamic Thermal Building Simulations (2015)
P. Raftery, E. Lee, T. Webster, T. Hoyt, F. Bauman, Effects of furniture and contents on peak cooling load 445–457 (2014)
Q. Nguyen, T. Ngo, P. Mendis, A review on fire protection for phase change materials in building applications, in From Materials to Structures: Advancement Through Innovation, ed by Samali, Attard, Song (Taylor & Francis Group, 2013)
Author information
Authors and Affiliations
Corresponding author
Rights and permissions
Copyright information
© 2019 The Author(s), under exclusive license to Springer Nature Switzerland AG
About this chapter
Cite this chapter
Delgado, J.M.P.Q., Martinho, J.C., Vaz Sá, A., Guimarães, A.S., Abrantes, V. (2019). PCM Current Applications and Thermal Performance. In: Thermal Energy Storage with Phase Change Materials. SpringerBriefs in Applied Sciences and Technology. Springer, Cham. https://doi.org/10.1007/978-3-319-97499-6_3
Download citation
DOI: https://doi.org/10.1007/978-3-319-97499-6_3
Published:
Publisher Name: Springer, Cham
Print ISBN: 978-3-319-97498-9
Online ISBN: 978-3-319-97499-6
eBook Packages: EngineeringEngineering (R0)