Abstract
In the paper authors present a concept and a modelling method of the static and dynamic loads of human body’s parts: bones and muscles during movement. Currently the problem of human body modelling is very important for many domains of our “better life” programs e.g.: an automotive—to find the best solution for human protection during accidents, sport—to find the most efficient and least tiring movements, to the health protection or extend the active life of the elderly. The human body is not a rigid multi-body system, but elastic, flexible and varying according to time. It consists of semi-stiff bones, elastic muscles and tendons. Other parts like stomach or liver are hanging on elastic wires and move relatively to each other during the whole acceleration process etc. All those elements can be broken or fatigued under some load. So the model of human body is not linear and shouldn’t be modelled by linear equation sets. Authors present the concept of human body modelling based on three types element chain. One type are “bones” that are coupled in joints and conduct loads to the support surface; the elastic tendons that keep the joints and propel bones rotation in joints, and muscles that generate forces for stabilization system or for propelling the bones. In paper the simplified model of human body built in MATLAB/Simulink software is presented. Some results of simulation e.g. load of a knee during squat or landing after jump are compared with real test results.
Access this chapter
Tax calculation will be finalised at checkout
Purchases are for personal use only
References
Pons, J.L.: Wearable Robots: Biomechatronic Exoskeletons, CSIC, Madrid, Spain. Wiley (2008)
Dollar, A., Her, H.: Lower extremity exoskeletons and active orthoses: challenges and state-of-the-art. IEEE Trans. Robot. 24(1), 144–158 (2008)
Zoss, A., Kazerooni, H., Chu, A.: Biomechanical design of the Berkeley Lower Extremity Exoskeleton (BLEEX). IEEE/ASME Trans. Mechatron. 11(2), 128–138 (2006)
Bortole, M., Venkatakrishman, A., Hill, A.V.: First and Last Experiments on Muscle Mechanics. Cambridge University Press, Cambridge (1970)
Ghan, J., Kazerooni, H.: System identification for the Berkeley Lower Extremity Exoskeleton (BLEEX). In: Proceedings of the International Conference on Robotics and Automation, Orlando, Florida (2006)
Low, K., Yin, Y.: An integrated lower exoskeleton system towards design of a portable active orthotic device. Int. J. Robot. Autom. 22(1), 32 (2007)
Pillai, M., Kazerooni, H., Hurwich, A.: Design of a semi-active knee-ankle prosthesis. In: IEEE International Conference on Robotics and Automation. Shanghai, China (2011)
Mikkola, A., Shabana, A., Sanchez-Rebollo, A., Jimenez-Octavio, C.: Comparison between ANCF and B-spline surfaces. Multibody Syst. Dyn. 30(2), 119–138 (2013)
Grzelczyk, D., Biesiacki, P., Mrozowski, J., Awrejcewicz, J.: Dynamic simulation of a novel “broomstick” human forward fall model and finite element analysis of the radius under the impact force during fall. J. Theor. Appl. Mech. 56(1), 239–253 (2018) (Warsaw)
Valiente, A.: Design of a quasi-passive parallel leg exoskeleton to augment load carrying for walking. Master’s thesis, Department of Mechanical Engineering, Massachusetts Institute Technology, Cambridge (2005)
Sawicki, G.S., Khan, N.S.: A simple model to estimate plantar flexor muscle-tendon mechanics and energetics during walking with elastic ankle exoskeletons. TBME 2015
Kumar, V.: Modeling, analysis and simulation of multibody systems with contact and friction, Peng Song (2002)
Otter, M., Elmqvist, H., Cellier, F.E.: Modeling of multibody system with the object-oriented modeling language dymola. Nonlinear Dyn. 9(1), 91–112 (1996)
Liu, Y., Schmiedeler, J., Wensing, P., Orin, D.: A 3D Dual-SLIP model of human walking over a range of speeds. http://biomechanics.osu.edu/dynamic-walking/AbstractsFolder/Liu_2015_DW.pdf
Bertholdt, M., Kapper, J., Schmodt, S., Schnorr, C.: A study of parts based object class direction using complete graphs. Int. J. Comput. Vis. (2010)
Zahariev, E.: Computer system for kinematic and dynamic analysis synthesis of rigid and flexible multibody systems. PAMM 8(1), 10163–10164 (2008)
Miroslaw, T.: The method of modeling of human skeletons multi-body system. In: Awrejcewicz, J. (eds.) Dynamical Systems: Modelling. DSTA 2015. Springer Proceedings in Mathematics & Statistics, vol. 181. Springer, Cham (2016)
Acknowledgements
This method was developed and model was built in reference to Polish Exoskeleton NCBIR project No. DOBR/0037/R/R/ID1/2012/03.
Author information
Authors and Affiliations
Corresponding author
Editor information
Editors and Affiliations
Rights and permissions
Copyright information
© 2018 Springer International Publishing AG, part of Springer Nature
About this paper
Cite this paper
Mirosław, T., Zawadzki, A. (2018). Non-linear Modelling of Human Body Dynamic. In: Awrejcewicz, J. (eds) Dynamical Systems in Applications. DSTA 2017. Springer Proceedings in Mathematics & Statistics, vol 249. Springer, Cham. https://doi.org/10.1007/978-3-319-96601-4_23
Download citation
DOI: https://doi.org/10.1007/978-3-319-96601-4_23
Published:
Publisher Name: Springer, Cham
Print ISBN: 978-3-319-96600-7
Online ISBN: 978-3-319-96601-4
eBook Packages: Mathematics and StatisticsMathematics and Statistics (R0)