Abstract
Control rooms are used in a variety of industries. Digital displays are often prominent as wallboards (overviews) and as multiple desktop displays. If the displays are not optimally configured for the work tasks and lines of sight, then individuals can develop visual and physical discomfort, and there may be adverse effects on work flow. This business case study reports the process used by an architect-ergonomist team to provide very early schematic design advice for 15 control rooms in which visual ergonomics was an integral component. End users were engaged in the design process by blending the requirements of ISO11064 for the conceptual design of control rooms with a modified participatory ergonomics approach. The principle observation is that the process engenders greater ownership of the design by the end users and pride in their new workplace when the control room is built. Engaging end users in the schematic design process also provides an opportunity for developing creative solutions to visual ergonomics design problems.
Access this chapter
Tax calculation will be finalised at checkout
Purchases are for personal use only
References
Szeto G, Sham K (2008) The effects of angled positions of computer display screen on muscle activities of the neck-shoulder stabilizers. Int J Ind Ergon 38:9–17
Ripple P (1952) Variation in accommodation in vertical directions of gaze. Am J Ophthalmol 35:1631–1634
Burgess-Limerick R, Mon-Williams M, Coppard V (2000) Visual display height. Hum Factors 42(1):140–150
International Standards Organisation ISO 11064-1:2000 Ergonomic design of control centres- Part 1: Principles for the design of control centres. International Standards Organisation, Geneva
Falcao C, Soares M (2012) Ergonomic evaluation of the environment: a case study in a control room of the hydroelectric sector. Work 41:1449–1456
Wilson J (1995) Solution ownership in participatory work redesign: the case of a crane control room. Int J Ind Ergon 15:329–344
Shuman G, Walker-Peek S, Elbert G (2002) Centralized control room operates five process units. Hydrocarb Process 2002:43–46
Cordiner L, Graves R (1997) Ergonomic intervention during a gas processing plant refurbishment. Int J Ind Ergon 19:457–470
Burgess-Limerick R (2018) Participatory ergonomics: evidence and implementation lessons. Appl Ergon 68:289–293
Skrehot P, Marek J, Houser F (2016) Ergonomics aspects in control rooms. Theor Issues Ergon Sci 18:46–58. https://doi.org/10.1080/1463922X.2016.1159356
Graves V (2010) Ergonomic control room design improves operator comfort and safety. Power Eng 114:50–52
Long J, Helland M (2012) A multidisciplinary approach to solving computer related vision problems. Ophthalmic Physiol Opt 32:429–435
Bittencourt J, Duarte F, Beguin P (2017) From the past to the future: integrating work experience into the design process. Work 57:379–387
Seim R, Broberg O (2010) Participatory workspace design: a new approach for ergonomics? Int J Ind Ergon 40:25–33
Zamberlan M et al (2012) DHM simulation in virtual environments: a case-study on control room design. Work 41:2243–2247
Human Factors and Ergonomics Society of Australia (2015) Sedentary behaviour: HFESA position on prolonged unbroken sitting time. https://www.ergonomics.org.au/documents/item/184. Accessed 25 May 2018
Robbins R (2009) State-of-the-art control rooms. Control Eng 39–41
Hellen R (2014) Upgraded control room consoles improve ergonomics. Power 20–21
Hollifield B et al (2008) The High Performance HMI Handbook, 1st edn. Houston, PAS
Author information
Authors and Affiliations
Corresponding author
Editor information
Editors and Affiliations
Rights and permissions
Copyright information
© 2019 Springer Nature Switzerland AG
About this paper
Cite this paper
Long, J., Ockendon, R., McDonald, F. (2019). Visual Ergonomics in Control Rooms – An Example of Creativity in Practice. In: Bagnara, S., Tartaglia, R., Albolino, S., Alexander, T., Fujita, Y. (eds) Proceedings of the 20th Congress of the International Ergonomics Association (IEA 2018). IEA 2018. Advances in Intelligent Systems and Computing, vol 827. Springer, Cham. https://doi.org/10.1007/978-3-319-96059-3_14
Download citation
DOI: https://doi.org/10.1007/978-3-319-96059-3_14
Published:
Publisher Name: Springer, Cham
Print ISBN: 978-3-319-96058-6
Online ISBN: 978-3-319-96059-3
eBook Packages: Intelligent Technologies and RoboticsIntelligent Technologies and Robotics (R0)