Abstract
Selecting angles of attack methods in the design of blade rows (BR) in the composition of compressors and turbines are considered. A number of additions are proposed for using the generalized characteristics of blade profile gratings and A. Howell’s empirical dependencies. To verify the method, the results of factory tests, 2D and 3D CAD/ CAE-simulation of the flow, and gas-dynamic characteristics of the flow parts’ components including blowing of the blade profile gratings were used. It is shown that this method can be effectively used to optimize the geometry of the blade profile gratings in the composition of compressors and turbines and the choice of their operation modes. This allows to significantly accelerate the design and development of gas turbine engines (GTE), gas turbine drives (GTD), and power plants (PP). The proposed method can be used in the creation and use of gas turbines in power, transport, and other areas.
Access this chapter
Tax calculation will be finalised at checkout
Purchases are for personal use only
References
Rzhavin YA, Lokaya V (1995) Osevyye i tsentrobezhnyye kompressory dvigateley letatel’nykh apparatov (Axial and centrifugal compressors of aircraft engines: Theory, design and calculation). MAI, Moscow
Howell AR (1947) Gazodinamika osevogo kompressora (Gas dynamics of an axial compressor). Moscow
Eckert B (1959) Osevyye i tsentrobezhnyye kompressory. Primeneniye, teoriya, raschet (Axial and centrifugal compressors. Application, theory, calculation). Mashgis, Moscow
AGARD/PEP Working Group 12 (1981) Trough Flow Calculations in Axial Flow Turbomachines, AGARD-AR-175
Boyce MP (2008) Advanced gas turbines, availability and maintainability, power and energy technology. Houston, Texas
Bunimovich AI, Svyatogorov AA (1967) Aerodinamicheskiye kharakteristiki ploskikh kompressornykh reshetok pri bol’shoy dozvukovoy skorosti (Aerodynamic characteristics of flat compressor grids at a high subsonic speed). Mashinostroenie, Moscow
Gostelow DP (1987) Aerodynamics of lattices of turbomachines. Gostelow
Zhukovsky MI (1967) Aerodinamicheskiy raschet potoka v osevykh turbo-mashinakh (Aerodynamic flow calculation in axial turbo-machines). Mashinostroenie, Moscow
Ol’shtein LE, Protserov VG (1948) Method of calculating the axial compressor from blow down data of flat compressor gratings. Moscow
Kazanchan PP, Karavaev BV, Serkov VI, Shishkin VN (1975) Obobshcheniye rezul’tatov produvok ploskikh kompressornykh reshetok metodom regressionnogo analiza (Generalization of the results of blowdown of flat compressor gratings by the regression analysis method). CIAM, Moscow
Atlas iskhodnykh model’nykh stupeney osevykh kompressorov (Atlas of initial model stages of axial compressors) (1967) Tsentral’nyy kotloturbinnyy institut im. I.I. Polzunova, Leningrad, 1967
Moore RD, Reid L (1980) Performance of sigle-stage axial-flow transonic compressor with rotor and stator aspect ratios of 1.19 and 1.26, respectively and with design pressure ratio of 2,05. Technical paper NASA TP1659, NACA
Rzhavin YA, Emin ON, Karasev VN (2003) Lopatochnyye mashiny dvigateley letatel’nykh apparatov. Teoriya i raschet (Shovel machines of aircraft engines. Theory and calculation). MAI-Print, Moscow
Deich ME, Samoilovich GS (1959) Osnovy aerodinamiki osevykh turbomashin. (Fundamentals of aerodynamics of axial turbomachines). Mashgis, Moscow
Zhdanov IA (2009) Metodika teoreticheskogo rascheta kharakteristiki kompressora aviatsionnogo dvigatelya (Technique of theoretical calculation of the characteristics of the compressor of an aircraft engine). Vestnik Samarskogo gosudarstvennogo aerokosmicheskogo universiteta imeni akademika SP Korolova 3(3):76–82
Kampsty N (2000)Aerodynamics of compressors. Krieger Publishing Company
Komarov AP (1967) Issledovaniye ploskikh kompressornykh reshetok (Research of flat compressor gratings). Lopatochnyye mashiny i struynyye apparaty, Mashinostroenie, Moscow, pp 67–110
Boyko, Girich GA, Ershov VN, Yanevich VN (1989) Metod rascheta dvumernogo techeniya v mnogostupenchatom osevom kompressore (A method for calculating a two-dimensional flow in a multistage axial compressor). Izv. VUZov 5:37–41
Howell AR (1945) Fluid dynamics of axial compressors 153:441–452. https://doi.org/10.1243/pime_proc_1945_153_049_02
Horlock JH (1973) Axial compressors. Krieger Publishing Co Inc.
Author information
Authors and Affiliations
Corresponding author
Editor information
Editors and Affiliations
Rights and permissions
Copyright information
© 2019 Springer Nature Switzerland AG
About this paper
Cite this paper
Rozhkov, K.E., Krivosheev, I.A., Simonov, N.B. (2019). Selection of Incidence Angle at Designing Blade Row of Compressors and Turbines. In: Radionov, A., Kravchenko, O., Guzeev, V., Rozhdestvenskiy, Y. (eds) Proceedings of the 4th International Conference on Industrial Engineering. ICIE 2018. Lecture Notes in Mechanical Engineering. Springer, Cham. https://doi.org/10.1007/978-3-319-95630-5_21
Download citation
DOI: https://doi.org/10.1007/978-3-319-95630-5_21
Published:
Publisher Name: Springer, Cham
Print ISBN: 978-3-319-95629-9
Online ISBN: 978-3-319-95630-5
eBook Packages: EngineeringEngineering (R0)