Abstract
Casting of composites is a simple and low cost route to produce composites, which allows numerous possibilities in terms of reinforcement location in the cast part and high geometry flexibility of the products. However, interfaces between reinforcement and metal depend on the behaviour of the particles in liquid metal during processing. The work investigates the effects of parameters such as temperature and time of contact between WC particles and liquid aluminium, and reinforcement content, in the production of cast AA7075/WC composites. WC particles coming from recycled cutting tools are used as reinforcement for aluminium alloys AA 7075, widely used in aeronautical domain. Reinforcement contents of 15 and 30 wt %, temperatures of 700, 740 and 780C, and contact time of 1, 2, 3 and 4 h were the values of the investigated variables. Microstructure of cast composites produced under these conditions were analysed by OM, SEM and EDS microanalysis. A reaction layer was found in the interface between metal and WC, with composition and micro constituents depending on the studied parameters. A mechanism of formation of the reaction layer is proposed.
Keywords
This is a preview of subscription content, log in via an institution.
Buying options
Tax calculation will be finalised at checkout
Purchases are for personal use only
Learn about institutional subscriptionsReferences
Kainer, K.U.: Basics of metal matrix composites. In: Metal Matrix Composites: Custom-Made Materials for Automotive and Aerospace Engineering, pp. 1–54. Wiley-VGH Verlag Gmbh & Co, Weinheim (2006. Cap.1)
Hunt Jr., W.H.: Metal matrix composites: Applications. In: Jürgen, K.H.B., Cahn, R.W., Flemings, M.C., Ilschner, B., Kramer, E.J., Mahajan, S., Veyssière, P. (eds.) Encyclopaedia of Materials: Science and Technology, 2nd edn, pp. 5442–5446. Elsevier, Oxford (2001)
Singh, S., Singh, I., Dvivedi, A., Davim, J.P.: SiCp-Reinforced Al6063 MMCs: Mechanical behavior and microstructural analysis. In: International Conference on Research and Innovations in Mechanical Engineering, 2014, Ludhiana/India. Proceedings… ed. Springer India, vol. 1, pp. 451–464 (2014)
Mazahery, A., Abdizadeh, H., Baharvandi, H.R.: Development of high-performance A356/nano-Al2O3 composites. Mater. Sci. Eng. A. 518, 61–64 (2009)
Sukumaran, K., Ravikumar, K.K., Pillai, S.G.K., Rajan, T.P.D., Ravi, M., Pillai, R.M., Pai, B.C.: Studies on squeeze casting of Al2124 alloy and 2124 – 10% SiCp metal matrix composite. Mater. Sci. Eng. A. 490(1–2), 235–241 (2008)
Naher, S., Brabazon, D., Looney, L.: Development and assessment of a new quick quench stir caster design for the production of metal matrix composites. J. Mater. Process. Technol. 166, 430–439 (2004)
Karantzalis, A.E., Lekatou, A., Georgatis, E., Mavros, H.: Solidification behaviour of ceramic particle reinforced Al-alloy matrices. J. Mater. Sci. 45(8), 2165–2173 (2010)
Lekatou, A., Karantzalis, A.E., Evangelou, A., Gousia, V., Kaptay, G., Gácsi, Z., Baumli, P., Simon, A.: Aluminium reinforced by WC and TiC nanoparticles (ex-situ) and aluminide particles (in-situ): microstructure, wear and corrosion behavior. Mater. Des. 65, 1121–1135 (2015)
Wolbach, W.S., Bryan, S.R., Shoemaker, G.L., Krucek, T.W., Maier, R.D., Soni, K.K., Chabala, J.M., Mogilevsky, R., Levi-Setti, R.: Optimization of chemical reactions between alumina/silica fibres and aluminium-magnesium alloys during composite processing. J. Mater. Sci. 32, 1953–1961 (1997)
Amirkhanlou, S., Niroumand, B.: Fabrication and characterization of Al356/SiCp semissolid composites by injecting SiCp containing composite powders. J. Mater. Process. Technol. 212, 841–847 (2012)
Diniz, A.E., Marcondes, F.C., Coppini, N.L.: Tecnologia da usinagem dos materiais. In: Org (ed.) Materiais para ferramentas, pp. 77–104. Artliber Editora Ltda, São Paulo (2013)
Kalpakjian, S., Schmid, S.R.: Manufacturing Engineering and Technology, 6th edn. Pearson. Australia Group Pty Ltd, Melbourne (2009)
Chattopadhyay, A.K., Roy, P., Ghosh, A., Sarangi, S.K.: Wettability and machinability study of pure aluminium towards uncoated and coated carbide cutting tool inserts. Surf. Coat. Technol. 203, 941–951 (2009)
Calatoru, V.D., Balazinski, M., Mayer, J.R.R., Paris, H., L’Espérance, G.: Diffusion wear mechanism during high-speed machining of 7475-T7351 aluminum alloy with carbide end mills. Wear. 265(11–12), 1793–1800 (2008)
McAlister, A.J.: The Al-Co (Aluminium-Cobalt) system. Bull. Alloy Phase Diagr. 10(6), 646–650 (1989)
Acknowledgements
The authors want to thank financial support from the Brazilian Government Agencies: CAPES and CNPq National Council for Scientific and Technological Development.
Author information
Authors and Affiliations
Corresponding author
Editor information
Editors and Affiliations
Rights and permissions
Copyright information
© 2019 The Society for Experimental Mechanics, Inc.
About this paper
Cite this paper
Viana, M.F., Robert, M.H. (2019). Analysis of Interfaces in AA7075/ Recycled WC Particles Composites Produced via Liquid Route. In: Thakre, P., Singh, R., Slipher, G. (eds) Mechanics of Composite, Hybrid and Multifunctional Materials, Volume 5. Conference Proceedings of the Society for Experimental Mechanics Series. Springer, Cham. https://doi.org/10.1007/978-3-319-95510-0_42
Download citation
DOI: https://doi.org/10.1007/978-3-319-95510-0_42
Published:
Publisher Name: Springer, Cham
Print ISBN: 978-3-319-95509-4
Online ISBN: 978-3-319-95510-0
eBook Packages: EngineeringEngineering (R0)