Abstract
Although the anisotropy of wood fibers is reasonably well established, the anisotropy of injection molded wood fiber composites is not well understood. For this, fiber distribution is an important parameter in determining the properties of the composite. This work investigates the application of ultrasonic testing in evaluating natural fiber thermoplastic composites reinforced with olive wood flour (OWF). The characterization of sound propagation speed in the composite is intended to be a tool for evaluating the bio-composite namely fiber distribution and the effects of the direction of injection during the elaboration of the composite. The quality of fiber distribution homogeneity can be assessed by mapping the returning signals of the emitted longitudinal ultrasonic wave. This study presents the measured sound speeds for a composite system of OWF and polypropylene (PP) using immersion measurements. It is known that the longitudinal wave velocity is a function of the material property, which in turn is a function of fiber content and adhesion efficiency. Therefore, the aim of this work is to study the feasibility of using the ultrasonic longitudinal sound wave and the time of flight TOF instead of the morphological analysis with the scanning electron microscope, which is much more expensive and complicate.
Keywords
Access this chapter
Tax calculation will be finalised at checkout
Purchases are for personal use only
References
Amar, B., Salem, K., Hocine, D., Chadia, I., Juan, M.J.: Study and characterization of composites materials based on polypropylene loaded with olive husk flour. J. Appl. Polym. Sci. 122(2), 1382–1394 (2011)
Djidjelli, H., Benachour, D., Boukerrou, A., Zefouni, O., Martinez-Véga, J., Farenc, J., Kaci, M.: Thermal, dielectric and mechanical study of poly(vinyl chloride)/olive pomace composites. Express Polym. Lett. 1, 846–852 (2007)
Bouafif, H., Koubaa, A., Perré, P., Cloutier, A.: Effects of fiber characteristics on the physical and mechanical properties of wood plastic composites. Compos. A Appl. Sci. Manuf. 40(12), 1975–1981 (2009)
Panthapulakkal, S., Sain, M.: Injection-molded short hemp fiber/glass fiber-reinforced polypropylene hybrid composites—mechanical, water absorption and thermal properties. J. Appl. Polym. Sci. 103(4), 2432–2441 (2007)
Raj, R.G., Kokta, B.V., Daneault, C.: Wood flour as a low-cost reinforcing filler for polyethylene: studies on mechanical properties. J. Mater. Sci. 25(3), 1851–1855 (1990)
Harper, D., Wolcott, M.: Interaction between coupling agent and lubricants in wood–polypropylene composites. Compos. A Appl. Sci. Manuf. 35(3), 385–394 (2004)
Keener, T.J., Stuart, R.K., Brown, T.K.: Maleated coupling agents for natural fibre composites. Compos. A Appl. Sci. Manuf. 35(3), 357–362 (2004)
Jiang, H., Kamdem, D.P.: Characterization of the surface and the interphase of PVC–copper amine-treated wood composites. Appl. Surf. Sci. 256(14), 4559–4563 (2010)
Naghmouchi, I., Espinach, F.X., Mutjé, P., Boufi, S.: Polypropylene composites based on lignocellulosic fillers: how the filler morphology affects the composite properties. Mater. Des. 1980–2015 65, 454–461 (2015)
Kromine, A.K., Fomitchov, P.A., Krishnaswamy, S., Achenbach, J.D.: Laser ultrasonic detection of surface breaking discontinuities: scanning laser source technique. Mater. Eval. 58, 173 (2000)
Castellano, A., Foti, P., Fraddosio, A., Marzano, S., Piccioni, M.D.: Mechanical characterization of CFRP composites by ultrasonic immersion tests: experimental and numerical approaches. Compos. B Eng. 66, 299–310 (2014)
Every, A.G., Sachse, W.: Determination of the elastic constants of anisotropic solids from acoustic-wave group-velocity measurements. Phys. Rev. B 42(13), 8196 (1990)
El-Sabbagh, A., Steuernagel, L., Ziegmann, G.: Characterisation of flax polypropylene composites using ultrasonic longitudinal sound wave technique. Compos. B Eng. 45(1), 1164–1172 (2013)
Author information
Authors and Affiliations
Corresponding author
Editor information
Editors and Affiliations
Rights and permissions
Copyright information
© 2019 Springer Nature Switzerland AG
About this paper
Cite this paper
Bouhamed, N., Souissi, S., Marechal, P., Benamar, M., Lenoir, O. (2019). Effect of Injection Direction in Elaboration of Polypropylene Reinforced with Olive Wood Flour on Ultrasonic and Morphological Properties. In: Fakhfakh, T., Karra, C., Bouaziz, S., Chaari, F., Haddar, M. (eds) Advances in Acoustics and Vibration II. ICAV 2018. Applied Condition Monitoring, vol 13. Springer, Cham. https://doi.org/10.1007/978-3-319-94616-0_30
Download citation
DOI: https://doi.org/10.1007/978-3-319-94616-0_30
Published:
Publisher Name: Springer, Cham
Print ISBN: 978-3-319-94615-3
Online ISBN: 978-3-319-94616-0
eBook Packages: EngineeringEngineering (R0)