Advertisement

Models of Manufacturing Practices and Integrative Model

  • Liliana Avelar-SosaEmail author
  • Jorge Luis García-Alcaraz
  • Aidé Aracely Maldonado-Macías
Chapter
Part of the Management and Industrial Engineering book series (MINEN)

Abstract

This chapter develops three structural equation models. The first two relate the best manufacturing practices with eight supply chain performance benefits. The third one is a second-order model that associates all the regional impact factors, manufacturing practices, and supply chain benefits studied in previous chapters. Each model proposes its own hypotheses to relate the latent variables. Such hypotheses are statistically tested and validated to confirm their feasibility. Then, the direct, indirect, and total effects are interpreted for each relationship between latent variables. Finally, we propose final conclusions and industrial implications for each model.

References

  1. Agénor P-R (2013) Public capital. Growth, and welfare, work in progress, University of Manchester (March 2009)Google Scholar
  2. Agus A, Hassan Z (2011) Enhancing production performance and customer performance through total quality management (TQM): strategies for competitive advantage. Procedia Soc Behav Sci 24:1650–1662.  https://doi.org/10.1016/j.sbspro.2011.09.019CrossRefGoogle Scholar
  3. Ahmad MF, Zakuan N, Jusoh A, Takala J (2012) Relationship of TQM and business performance with mediators of SPC, lean production and TPM. Procedia Soc Behav Sci 65:186–191.  https://doi.org/10.1016/j.sbspro.2012.11.109CrossRefGoogle Scholar
  4. Alcaraz JLG, Macías AAM, Luevano DJP, Fernández JB, López AJG, Macías EJ (2016) Main benefits obtained from a successful JIT implementation. Int J Adv Manuf Technol 86(9):2711–2722.  https://doi.org/10.1007/s00170-016-8399-5CrossRefGoogle Scholar
  5. Alhelalat JA, MmA Habiballah, Twaissi NM (2017) The impact of personal and functional aspects of restaurant employee service behaviour on customer satisfaction. Int J Hospital Manag 66:46–53.  https://doi.org/10.1016/j.ijhm.2017.07.001CrossRefGoogle Scholar
  6. Alqahtani AY, Gupta SM (2018) Money-back guarantee warranty policy with preventive maintenance strategy for sensor-embedded remanufactured products. J Ind Eng Int.  https://doi.org/10.1007/s40092-018-0259-5CrossRefGoogle Scholar
  7. Al-Tit AA (2017) Factors affecting the organizational performance of manufacturing firms. Int J Eng Bus Manag 9:1847979017712628.  https://doi.org/10.1177/1847979017712628CrossRefGoogle Scholar
  8. Altomonte H, Sánchez R (2016) Hacia una nueva gobernanza de los recursos naturales en América Latina y el Caribe. CEPALCrossRefGoogle Scholar
  9. Amasaka K (2014) New JIT, new management technology principle: surpassing JIT. Procedia Technol 16:1135–1145.  https://doi.org/10.1016/j.protcy.2014.10.128CrossRefGoogle Scholar
  10. Avelar-Sosa L, García-Alcaraz JL, Cedillo-Campos MG, Adarme-Jaimes W (2014) Effects of regional infrastructure and offered services in the supply chains performance: case Ciudad Juarez. DYNA 81:208–217CrossRefGoogle Scholar
  11. Azevedo SG, Govindan K, Carvalho H, Cruz-Machado V (2012) An integrated model to assess the leanness and agility of the automotive industry. Resour Conserv Recycl 66:85–94.  https://doi.org/10.1016/j.resconrec.2011.12.013CrossRefGoogle Scholar
  12. Balakrishnan R, Linsmeier TJ, Venkatachalam M (1996) Financial benefits from JIT adoption: effects of customer concentration and cost structure. Account Rev 71(2):183–205Google Scholar
  13. Baldwin JR, Sabourin D (2002) Advanced technology use and firm performance in Canadian manufacturing in the 1990s. Ind Corporate Change 11:761–789CrossRefGoogle Scholar
  14. Bastas A, Liyanage K (2018) Sustainable supply chain quality management: a systematic review. J Clean Prod 181:726–744.  https://doi.org/10.1016/j.jclepro.2018.01.110CrossRefGoogle Scholar
  15. Bayer AK, Rademacher M, Rutherford A (2009) Development and perspectives of the australian coal supply chain and implications for the export market. Zeitschrift für Energiewirtschaft 33(3):255–267.  https://doi.org/10.1007/s12398-009-0031-zCrossRefGoogle Scholar
  16. Becerril-Torres OU, Álvarez-Ayuso IC, Del moral-Barrera LE (2010) Do infrastructures influence the convergence of efficiency in Mexico? J Policy Model 32(1):120–137.  https://doi.org/10.1016/j.jpolmod.2009.08.006CrossRefGoogle Scholar
  17. Bhatnagar R, Sohal AS (2005) Supply chain competitiveness: measuring the impact of location factors, uncertainty and manufacturing practices. Technovation 25(5):443–456.  https://doi.org/10.1016/j.technovation.2003.09.012CrossRefGoogle Scholar
  18. Blos MF, Hoeflich SL, Miyagi PE (2015) A general supply chain continuity management framework. Procedia Comput Sci 55:1160–1164.  https://doi.org/10.1016/j.procs.2015.07.087CrossRefGoogle Scholar
  19. Bolatan GIS, Gozlu S, Alpkan L, Zaim S (2016) The impact of technology transfer performance on total quality management and quality performance. Procedia Soc Behav Sci 235:746–755.  https://doi.org/10.1016/j.sbspro.2016.11.076CrossRefGoogle Scholar
  20. Boyer K (1997) Advanced manufacturing technology and performance: a longitudinal analysis. In: 1997/08 academy of management, pp 243–247.  https://doi.org/10.5465/ambpp.1997.4981988CrossRefGoogle Scholar
  21. Braunscheidel MJ, Suresh NC (2009) The organizational antecedents of a firm’s supply chain agility for risk mitigation and response. J Oper Manag 27(2):119–140.  https://doi.org/10.1016/j.jom.2008.09.006CrossRefGoogle Scholar
  22. Brock G, German-Soto V (2013) Regional industrial growth in Mexico: do human capital and infrastructure matter? J Policy Model 35(2):228–242.  https://doi.org/10.1016/j.jpolmod.2012.10.003CrossRefGoogle Scholar
  23. Bronk C, González-Aréchiga B (2011) Mexico-United States border security: from a bilateral to a truly binational policy process. Latin Am Policy 2(2):152–181.  https://doi.org/10.1111/j.2041-7373.2011.00038.xCrossRefGoogle Scholar
  24. Calderon C, Servén L (2014) Infrastructure, growth, and inequality: an overview. The World BankCrossRefGoogle Scholar
  25. Camagni R (2017) Regional competitiveness: towards a concept of territorial capital. In: Seminal studies in regional and urban economics. Springer, pp 115–131CrossRefGoogle Scholar
  26. Cedillo-Campos MG, García-Ortega MG, Martner-Peyrelongue CD, Saucedo-Martínez JA, Ponce-Ceja N (2017) Flujos de carga automotriz y su impacto en la infraestructura ferroviaria en México: un enfoque de fluidez en la cadena de suministro. Ingeniería Investigación y Tecnología 18(1)CrossRefGoogle Scholar
  27. Chan ATL, Ngai EWT, Moon KKL (2017) The effects of strategic and manufacturing flexibilities and supply chain agility on firm performance in the fashion industry. Eur J Oper Res 259(2):486–499.  https://doi.org/10.1016/j.ejor.2016.11.006MathSciNetCrossRefzbMATHGoogle Scholar
  28. Chatzikontidou A, Longinidis P, Tsiakis P, Georgiadis MC (2017) Flexible supply chain network design under uncertainty. Chem Eng Res Des 128:290–305.  https://doi.org/10.1016/j.cherd.2017.10.013CrossRefGoogle Scholar
  29. Chavez PJA, Seow C (2012) Managing food quality risk in global supply chain: a risk management framework. Int J Eng Bus Manag 4:3.  https://doi.org/10.5772/46116CrossRefGoogle Scholar
  30. Cipoletta Tomassian G, Pérez G, Sánchez R (2010) Políticas integradas de infraestructura, transporte y logística: experiencias internacionales y propuestas iniciales. CEPALGoogle Scholar
  31. Cruz AM, Haugan GL, Rincon AMR (2014) The effects of asset specificity on maintenance financial performance: an empirical application of transaction cost theory to the medical device maintenance field. Eur J Oper Res 237(3):1037–1053.  https://doi.org/10.1016/j.ejor.2014.02.040CrossRefzbMATHGoogle Scholar
  32. Cua KO, McKone KE, Schroeder RG (2001) Relationships between implementation of TQM, JIT, and TPM and manufacturing performance. J Oper Manag 19(6):675–694.  https://doi.org/10.1016/S0272-6963(01)00066-3CrossRefGoogle Scholar
  33. Ding-fu J, Li X (2011) Study of automobile after-sale service delivery system based on the customer value analysis. In: 2011 international conference on E-business and E-government (ICEE), 6–8 May 2011, pp 1–3.  https://doi.org/10.1109/icebeg.2011.5881384
  34. Dubey R, Gunasekaran A (2015) Agile manufacturing: framework and its empirical validation. Int J Adv Manuf Technol 76(9):2147–2157.  https://doi.org/10.1007/s00170-014-6455-6CrossRefGoogle Scholar
  35. Duggal VG, Saltzman C, Klein LR (2007) Infrastructure and productivity: an extension to private infrastructure and it productivity. J Econometrics 140(2):485–502.  https://doi.org/10.1016/j.jeconom.2006.07.010MathSciNetCrossRefzbMATHGoogle Scholar
  36. Duran-Fernandez R, Santos G (2014) A regional model of road accessibility in Mexico: accessibility surfaces and robustness analysis. Res Transp Econ 46:55–69.  https://doi.org/10.1016/j.retrec.2014.09.005CrossRefGoogle Scholar
  37. Dutrénit G (2015) Oportunidades basadas en capacidades construidas: política de innovación para fortalecer la manufactura avanzada mexicana, 1st edn. Santiago, ChileGoogle Scholar
  38. Farooq MS, Salam M, Fayolle A, Jaafar N, Ayupp K (2018) Impact of service quality on customer satisfaction in Malaysia airlines: a PLS-SEM approach. J Air Transp Manag 67:169–180.  https://doi.org/10.1016/j.jairtraman.2017.12.008CrossRefGoogle Scholar
  39. Francois J, Manchin M (2013) Institutions, infrastructure, and trade. World Dev 46:165–175.  https://doi.org/10.1016/j.worlddev.2013.02.009CrossRefGoogle Scholar
  40. García Alcaraz J, Alvarado Iniesta A, Juárez Castelló M (2012) Benefits of advanced manufacturing technologies. Benefits Adv Manuf Technol 6(16):5524–5532.  https://doi.org/10.5897/AJBM11.2777CrossRefGoogle Scholar
  41. García-Alcaraz JL, Prieto-Luevano DJ, Maldonado-Macías AA, Blanco-Fernández J, Jiménez-Macías E, Moreno-Jiménez JM (2015) Structural equation modeling to identify the human resource value in the JIT implementation: case maquiladora sector. Int J Adv Manuf Technol 77(5):1483–1497.  https://doi.org/10.1007/s00170-014-6561-5CrossRefGoogle Scholar
  42. Gligor DM (2016) The role of supply chain agility in achieving supply chain fit. Decis Sci 47(3):524–553.  https://doi.org/10.1111/deci.12205CrossRefGoogle Scholar
  43. Gligor DM, Holcomb MC (2012) Antecedents and consequences of supply chain agility: establishing the link to firm performance. J Bus Logistics 33(4):295–308.  https://doi.org/10.1111/jbl.12003CrossRefGoogle Scholar
  44. Gligor DM, Esmark CL, Holcomb MC (2015) Performance outcomes of supply chain agility: when should you be agile? J Oper Manag 33–34:71–82.  https://doi.org/10.1016/j.jom.2014.10.008CrossRefGoogle Scholar
  45. Green KW, Inman RA, Birou LM, Whitten D (2014) Total JIT (T-JIT) and its impact on supply chain competency and organizational performance. Int J Prod Econ 147:125–135.  https://doi.org/10.1016/j.ijpe.2013.08.026CrossRefGoogle Scholar
  46. Heim GR, Peng DX (2010) The impact of information technology use on plant structure, practices, and performance: an exploratory study. J Oper Manag 28(2):144–162.  https://doi.org/10.1016/j.jom.2009.09.005CrossRefGoogle Scholar
  47. Hochman G, Tabakis C, Zilberman D (2013) The impact of international trade on institutions and infrastructure. J Comp Econ 41(1):126–140.  https://doi.org/10.1016/j.jce.2012.07.001CrossRefGoogle Scholar
  48. Holtom BC, Burch TC (2016) A model of turnover-based disruption in customer services. Hum Resour Manag Rev 26(1):25–36.  https://doi.org/10.1016/j.hrmr.2015.09.004CrossRefGoogle Scholar
  49. Jaimurzina A, Sánchez R (2017) Gobernanza de la infraestructura para el desarrollo sostenible en América Latina y el Caribe: una apuesta inicial, vol 354. CEPALGoogle Scholar
  50. Jaimurzina A, Pérez G, Sánchez R (2015) Políticas de logística y movilidad para el desarrollo sostenible y la integración regional. CEPALGoogle Scholar
  51. Johansson L (2008) Supply chain security initiatives: a trade facilitation perspective. Kommerskollegium, The National Board of Trade, SwedenGoogle Scholar
  52. Kannan VR, Tan KC (2005) Just in time, total quality management, and supply chain management: understanding their linkages and impact on business performance. Omega 33(2):153–162.  https://doi.org/10.1016/j.omega.2004.03.012CrossRefGoogle Scholar
  53. Kanyan A, Ngana L, Voon BH (2016) Improving the service operations of fast-food restaurants. Procedia Soc Behav Sci 224:190–198.  https://doi.org/10.1016/j.sbspro.2016.05.439CrossRefGoogle Scholar
  54. Khanchanapong T, Prajogo D, Sohal AS, Cooper BK, Yeung ACL, Cheng TCE (2014) The unique and complementary effects of manufacturing technologies and lean practices on manufacturing operational performance. Int J Prod Econ 153:191–203.  https://doi.org/10.1016/j.ijpe.2014.02.021CrossRefGoogle Scholar
  55. Kiran DR (2017) Customer satisfaction. In: Kiran DR (ed) Total quality management (Chapter 10). Butterworth-Heinemann, pp 125–141.  https://doi.org/10.1016/B978-0-12-811035-5.00010-6CrossRefGoogle Scholar
  56. Kogan K, Tapiero C (2011) Inter-temporal inventory competition and the effects of capacity constraints. Int J Prod Econ 131(2):682–688.  https://doi.org/10.1016/j.ijpe.2011.02.014CrossRefGoogle Scholar
  57. Kojima M, Nakashima K, Ohno K (2008) Performance evaluation of SCM in JIT environment. Int J Prod Econ 115(2):439–443.  https://doi.org/10.1016/j.ijpe.2007.11.017CrossRefGoogle Scholar
  58. Koufteros X, Lu G, Peters RC, K-h Lai, Wong CWY, Edwin Cheng TC (2014) Product development practices, manufacturing practices, and performance: a mediational perspective. Int J Prod Econ 156:83–97.  https://doi.org/10.1016/j.ijpe.2014.05.017CrossRefGoogle Scholar
  59. Liu L, Luo H, Tang X (2006) Study of service guaranteed delivery time based on customer waiting time cost. In: 2006 international conference on service systems and service management, Oct 2006, pp 73–77.  https://doi.org/10.1109/icsssm.2006.320591
  60. Lynn M, Brewster ZW (2018) A within-restaurant analysis of changes in customer satisfaction following the introduction of service inclusive pricing or automatic service charges. Int J Hospitality Manag 70:9–15.  https://doi.org/10.1016/j.ijhm.2017.11.001CrossRefGoogle Scholar
  61. Mahmud N, Hilmi MF (2014) TQM and Malaysian SMEs performance: the mediating roles of organization learning. Procedia Soc Behav Sci 130:216–225.  https://doi.org/10.1016/j.sbspro.2014.04.026CrossRefGoogle Scholar
  62. Manyika J (2012) Manufacturing the future: the next era of global growth and innovation. McKinsey Global InstituteGoogle Scholar
  63. Matsui Y (2007) An empirical analysis of just-in-time production in Japanese manufacturing companies. Int J Prod Econ 108(1):153–164.  https://doi.org/10.1016/j.ijpe.2006.12.035MathSciNetCrossRefGoogle Scholar
  64. Montes D (2014) Elements and benefits from JIT: a factor analysis. Universiddad Autónoma de Ciudad Juárez, Ciudad JuárezGoogle Scholar
  65. Moosa K, Sajid A, Khan RA, Mughal A (2010) An empirical study of TQM implementation: examination of aspects versus impacts. Asian Bus Manag 9(4):525–551.  https://doi.org/10.1057/abm.2010.27CrossRefGoogle Scholar
  66. Nieto AT (2017) Crecimiento Económico e Industrialización en la Agenda 2030: Perspectivas Para México. Problemas del Desarrollo 48(188):83–111.  https://doi.org/10.1016/j.rpd.2017.01.005Google Scholar
  67. Oberoi JS, Khamba JS, Kiran R (2007) Impact of new technology and sourcing practices in managing tactical and strategic manufacturing flexibilities—an empirical study. Glob J Flex Syst Manag 8(3):1–14.  https://doi.org/10.1007/bf03396523CrossRefGoogle Scholar
  68. Okure MAE, Mukasa N, Elvenes BO (2006) Modelling the development of advanced manufacturing technologies (AMT) in developing countries. In: Mwakali JA, Taban-Wani G (eds) Proceedings from the international conference on advances in engineering and technology. Elsevier Science Ltd., Oxford, pp 488–494.  https://doi.org/10.1016/B978-008045312-5/50053-4CrossRefGoogle Scholar
  69. ONU (2015) Transformar nuestro mundo: la Agenda 2030 para el Desarrollo Sostenible. Naciones Unidas Nueva YorkGoogle Scholar
  70. Panuwatwanich K, Nguyen TT (2017) Influence of total quality management on performance of vietnamese construction firms. Procedia Eng 182:548–555.  https://doi.org/10.1016/j.proeng.2017.03.151CrossRefGoogle Scholar
  71. Parra Silva S (2017) Beneficios y ventajas competitivas de la Norma ISO 28000 para la seguridad en la cadena de suministros de empresas nacionales. Universidad Militar Nueva GranadaGoogle Scholar
  72. Perez C, Castro Rd, Simons D, Gimenez G (2010) Development of lean supply chains: a case study of the Catalan pork sector. Supply Chain Manag Int J 15(1):55–68.  https://doi.org/10.1108/13598541011018120CrossRefGoogle Scholar
  73. Phan CA, Matsui Y (2010) Comparative study on the relationship between just-in-time production practices and operational performance in manufacturing plants. Oper Manag Res 3(3):184–198.  https://doi.org/10.1007/s12063-010-0040-4CrossRefGoogle Scholar
  74. Porter ME (2011) Competitive advantage of nations: creating and sustaining superior performance, vol 2. Simon and SchusterGoogle Scholar
  75. Porter ME, Kramer MR (2019) Creating shared value. In: Managing sustainable business. Springer, pp 327–350Google Scholar
  76. Prajogo D, Olhager J (2012) Supply chain integration and performance: the effects of long-term relationships, information technology and sharing, and logistics integration. Int J Prod Econ 135(1):514–522.  https://doi.org/10.1016/j.ijpe.2011.09.001CrossRefGoogle Scholar
  77. Ríos G (2016) Los retos para la transformación productiva de América Latina. Economía y Desarrollo 156:53–61Google Scholar
  78. Rod M, Ashill NJ, Gibbs T (2016) Customer perceptions of frontline employee service delivery: a study of Russian bank customer satisfaction and behavioural intentions. J Retail Consum Serv 30:212–221.  https://doi.org/10.1016/j.jretconser.2016.02.005CrossRefGoogle Scholar
  79. Rodríguez-Méndez R, Sánchez-Partida D, Martínez-Flores JL, Arvizu-BarrÓn E (2015) A case study: SMED & JIT methodologies to develop continuous flow of stamped parts into AC disconnect assembly line in Schneider Electric Tlaxcala Plant. IFAC-PapersOnLine 48(3):1399–1404.  https://doi.org/10.1016/j.ifacol.2015.06.282CrossRefGoogle Scholar
  80. Rotaru K, Pournader M (2018) Modeling risk emergence and propagation in buyer-supplier-customer relationships. In: Khojasteh Y (ed) Supply chain risk management: advanced tools, models, and developments. Springer Singapore, Singapore, pp 43–63.  https://doi.org/10.1007/978-981-10-4106-8_3Google Scholar
  81. Saberi S, Yusuff R (2012) Neural network application in predicting advanced manufacturing technology implementation performance. Neural Comput Appl 21(6):1191–1204.  https://doi.org/10.1007/s00521-010-0507-0CrossRefGoogle Scholar
  82. Saliba MA, Zammit D, Azzopardi S (2017) A study on the use of advanced manufacturing technologies by manufacturing firms in a small, geographically isolated, developed economy: the case of Malta. Int J Adv Manuf Technol 89(9):3691–3707.  https://doi.org/10.1007/s00170-016-9294-9CrossRefGoogle Scholar
  83. Sánchez R, Gómez Paz MA (2017) Efectos económicos de cambios en la redes de infraestructura logística: Dos casos de estudio en ArgentinaGoogle Scholar
  84. Schoenherr T, Swink M (2012) Revisiting the arcs of integration: cross-validations and extensions. J Oper Manag 30(1):99–115.  https://doi.org/10.1016/j.jom.2011.09.001CrossRefGoogle Scholar
  85. Sendil Kumar C, Panneerselvam R (2007) Literature review of JIT-KANBAN system. Int J Adv Manuf Technol 32(3):393–408.  https://doi.org/10.1007/s00170-005-0340-2CrossRefGoogle Scholar
  86. Sendlhofer T, Lernborg CM (2017) Labour rights training 2.0: the digitalisation of knowledge for workers in global supply chains. J Cleaner Prod.  https://doi.org/10.1016/j.jclepro.2017.12.173
  87. Sénéchal O (2016) Maintenance decision support for sustainable performance: problems and research directions at the crossroads of health management and eco-design. IFAC-PapersOnLine 49(28):85–90.  https://doi.org/10.1016/j.ifacol.2016.11.015CrossRefGoogle Scholar
  88. Shaw NE, Burgess TF, de Mattos C, Stec LZ (2005) Supply chain agility: the influence of industry culture on asset capabilities within capital intensive industries. Int J Prod Res 43(16):3497–3516.  https://doi.org/10.1080/00207540500117805CrossRefGoogle Scholar
  89. Shohet IM, Nobili L (2016) Enterprise resource planning system for performance-based-maintenance of clinics. Autom Constr 65:33–41.  https://doi.org/10.1016/j.autcon.2016.01.008CrossRefGoogle Scholar
  90. Singh S, Garg D (2011) JIT system: concepts, benefits and motivation in indian industries. Int J Manag Bus Stud 1(1):26–30Google Scholar
  91. Singhry H, Abd Rahman A, Imm N (2016a) Effect of advanced manufacturing technology, concurrent engineering of product design, and supply chain performance of manufacturing companies. Int J Adv Manuf Technol 86(1–4):663–669.  https://doi.org/10.1007/s00170-015-8219-3CrossRefGoogle Scholar
  92. Singhry HB, Abd Rahman A, Imm NS (2016b) Effect of advanced manufacturing technology, concurrent engineering of product design, and supply chain performance of manufacturing companies. Int J Adv Manuf Technol 86(1):663–669.  https://doi.org/10.1007/s00170-015-8219-3CrossRefGoogle Scholar
  93. Soheilirad S, Govindan K, Mardani A, Zavadskas EK, Nilashi M, Zakuan N (2017) Application of data envelopment analysis models in supply chain management: a systematic review and meta-analysis. Ann Oper Res.  https://doi.org/10.1007/s10479-017-2605-1CrossRefGoogle Scholar
  94. Soltan H, Mostafa S (2015) Lean and agile performance framework for manufacturing enterprises. Procedia Manuf 2:476–484.  https://doi.org/10.1016/j.promfg.2015.07.082CrossRefGoogle Scholar
  95. Sreedevi R, Saranga H (2017) Uncertainty and supply chain risk: the moderating role of supply chain flexibility in risk mitigation. Int J Prod Econ 193:332–342.  https://doi.org/10.1016/j.ijpe.2017.07.024CrossRefGoogle Scholar
  96. Suwandej N (2015) Factors influencing total quality management. Procedia Soc Behav Sci 197:2215–2222.  https://doi.org/10.1016/j.sbspro.2015.07.361CrossRefGoogle Scholar
  97. Swink M, Narasimhan R, Kim SW (2005) Manufacturing practices and strategy integration: effects on cost efficiency, flexibility, and market-based performance. Decis Sci 36(3):427–457.  https://doi.org/10.1111/j.1540-5414.2005.00079.xCrossRefGoogle Scholar
  98. Tate WL, Ellram LM, Schoenherr T, Petersen KJ (2014) Global competitive conditions driving the manufacturing location decision. Bus Horiz 57(3):381–390.  https://doi.org/10.1016/j.bushor.2013.12.010CrossRefGoogle Scholar
  99. Terziovski M, Hermel P (2011) The role of quality management practice in the performance of integrated supply chains: a multiple cross-case analysis. Qual Manag J 18(2):10–25.  https://doi.org/10.1080/10686967.2011.11918310CrossRefGoogle Scholar
  100. Um J (2017) The impact of supply chain agility on business performance in a high level customization environment. Oper Manag Res 10(1):10–19.  https://doi.org/10.1007/s12063-016-0120-1MathSciNetCrossRefGoogle Scholar
  101. Vinodh S, Joy D (2012) Structural equation modelling of lean manufacturing practices. Int J Prod Res 50(6):1598–1607.  https://doi.org/10.1080/00207543.2011.560203CrossRefGoogle Scholar
  102. Vinodh S, Devadasan SR, Vimal KEK, Kumar D (2013) Design of agile supply chain assessment model and its case study in an Indian automotive components manufacturing organization. J Manuf Syst 32(4):620–631.  https://doi.org/10.1016/j.jmsy.2013.04.001CrossRefGoogle Scholar
  103. Vokurka RJ, Lummus RR, Krumwiede D (2007) Improving manufacturing flexibility: the enduring value of JIT and TQM. SAM Adv Manag J 72(1):14Google Scholar
  104. Withers BE, Ebrahimpour M, Hikmet N (1997) An exploration of the impact of TQM and JIT on ISO 9000 registered companies. Int J Prod Econ 53(2):209–216.  https://doi.org/10.1016/S0925-5273(97)00118-7CrossRefGoogle Scholar
  105. Womack JP, Jones DT (2005) Lean consumption. Harvard Bus Rev 83(3):58–68Google Scholar
  106. Wu M, Shen Q, Xu M, Wu D (2013) Modeling stockout risk and JIT purchasing in ready-mixed concrete batching plants. Int J Prod Econ 144(1):14–19.  https://doi.org/10.1016/j.ijpe.2012.03.017CrossRefGoogle Scholar
  107. Yang J (2014) Supply chain agility: securing performance for Chinese manufacturers. Int J Prod Econ 150:104–113.  https://doi.org/10.1016/j.ijpe.2013.12.018CrossRefGoogle Scholar
  108. Yu J, Subramanian N, Ning K, Edwards D (2015) Product delivery service provider selection and customer satisfaction in the era of internet of things: a Chinese e-retailers’ perspective. Int J Prod Econ 159:104–116.  https://doi.org/10.1016/j.ijpe.2014.09.031CrossRefGoogle Scholar
  109. Zehir C, Ertosun ÖG, Zehir S, Müceldilli B (2012) Total quality management practices’ effects on quality performance and innovative performance. Procedia Soc Behav Sci 41:273–280.  https://doi.org/10.1016/j.sbspro.2012.04.031CrossRefGoogle Scholar

Copyright information

© Springer International Publishing AG, part of Springer Nature 2019

Authors and Affiliations

  • Liliana Avelar-Sosa
    • 1
    Email author
  • Jorge Luis García-Alcaraz
    • 1
  • Aidé Aracely Maldonado-Macías
    • 1
  1. 1.Department of Industrial Engineering and Manufacturing, Institute of Engineering and TechnologyUniversidad Autónoma de Ciudad JuárezCiudad JuárezMexico

Personalised recommendations