Abstract
According to sustainable development approaches in the world, there are tendencies to save renewable resources, or resources with a long recovery time. This research aims to develop new composite materials based on the renewable resource in the form of hemp fibers. The article shows the results of research of mechanical characteristics (impact toughness, tensile strength, hardness) of polymer composite that is fiber-reinforced by technical hemp. The effect of size of fibers and method of structuring the polyester matrix on the mechanical properties is studied. The optimal composition of the composite, which provides better mechanical properties, is defined. It is determined that the investigated composites can be used as construction material based on renewable source.
Access this chapter
Tax calculation will be finalised at checkout
Purchases are for personal use only
References
Suardana, N.P.G., Piao, Y., Lim, J.K.: Mechanical properties of hemp fibers and hemp/PP composites effects of chemical surface treatment. Mater. Phys. Mech. 11, 3–9 (2011)
Etaati, A., Pather, S., Rahman, M.: Ground hemp fibers as filler/Reinforcement for thermoplastic biocomposites. Adv. Mater. Sci. Eng. 1, 24–35 (2015)
Hughers, M., Mott, L., Hague, J., Hill, C.A.S.: Procudings of the Sth International Conference on Woodfiber-Plastic Composites, Madison, WI, USA (1999)
Anand: Silver Jubilee Celebrations: Souvenir Volume, vol. 2. Institute of Agriculture, India, December 1966
Yan, Z.L., Wang, H., Lau, K.T., Pather, S., Zhang, J.C., Lin, G., Ding, Y.: Reinforcement of polypropylene with hemp fibres. Compos. B Eng. 46, 221–226 (2013)
Kopan, V.: Composite Materials. University Publishing House “Pulsari”, Kiev (2004)
Author information
Authors and Affiliations
Corresponding author
Editor information
Editors and Affiliations
Rights and permissions
Copyright information
© 2019 Springer International Publishing AG, part of Springer Nature
About this paper
Cite this paper
Melnychuk, M., Andrushko, O. (2019). Influence of the Scale Factor of Fibers and the Temperature of Structuring on the Physical and Mechanical Characteristics of Hemp Fiber Biocomposites. In: Ivanov, V., et al. Advances in Design, Simulation and Manufacturing. DSMIE 2019. Lecture Notes in Mechanical Engineering. Springer, Cham. https://doi.org/10.1007/978-3-319-93587-4_12
Download citation
DOI: https://doi.org/10.1007/978-3-319-93587-4_12
Published:
Publisher Name: Springer, Cham
Print ISBN: 978-3-319-93586-7
Online ISBN: 978-3-319-93587-4
eBook Packages: EngineeringEngineering (R0)