Abstract
A stand for durability testing of rolling bearings is presented in this paper. The project assumptions of the stand, mechanical construction and architecture of data acquisition and analysis system (hardware and software) are described in this paper. Finally, there are conclusions about stand’s capabilities included. The device allows is capable of testing the running characteristics of bearings under varying test conditions and loads, speeds, lubrication conditions and temperatures. This stand provides precise measurements and autonomic work which is necessary in long-term researches. Compact construction of the stand containing overload protection system and automatic turn off system, activated after exceeding limit values of operating parameters or diagnostic signals, allows autonomic work without frequent human supervision. The data obtained from the stand will be used in future researches. In addition, they allow to test the service life under the set operating conditions.
Keywords
Access this chapter
Tax calculation will be finalised at checkout
Purchases are for personal use only
References
Simrit: Simmerings and Rotary Seals (2007) Freundenberg Simrit GmbH & Co. KG/Technical Manual
SKF rolling bearings catalogue (2013) ©SKF Group 2013. www.skf.com/binary/77-121486/SKF-rolling-bearings-catalogue.pdf
SKF Group (2012) Bearing designs – bearing testing. In: Railway technical handbook, vol 1, pp 99–105
Randall RB, Antoni J (2010) Rolling element bearing diagnostics – a tutorial. Mech Syst Signal Process 25:485–520
Wieczorek AN (2015) Designing machinery and equipment in accordance with the principle of sustainable development. Manag Syst Prod Eng 17(1):28–34. https://doi.org/10.12914/MSPE-05-01-2015
Jurecki R, Pokropiński E, Więckowski D, Żołądek Ł (2017) Design of a test rig for the examination of mechanical properties of rolling bearings. Manag Syst Prod Eng 25(1):22–28
Mehdigholi H, Rafsanjani H, Behzad M (2011) Estimation of rolling bearing life with damage curve approach. Pol Marit Res 18:66–70
Acknowledgment
The publication was created as a result of research and development carried out by Fabryka Łożysk Tocznych Kraśnik SA together with the Kielce University of Technology in the project entitled “Establishment of a R & D Center in FŁT Kraśnik SA” under the Intelligent Development Operational Program 2014-2020, co-financed from the funds of European Regional Development No. CBR/1/50-52/2017 from 07/04/2017
Author information
Authors and Affiliations
Corresponding author
Editor information
Editors and Affiliations
Rights and permissions
Copyright information
© 2019 Springer Nature Switzerland AG
About this paper
Cite this paper
Zwierzchowski, J., Pietrala, D., Laski, P.A., Lomza, H. (2019). Acquisition of Measurement Data on a Stand for Durability Tests of Rolling Bearings. In: Durakbasa, N., Gencyilmaz, M. (eds) Proceedings of the International Symposium for Production Research 2018. ISPR 2018. Springer, Cham. https://doi.org/10.1007/978-3-319-92267-6_16
Download citation
DOI: https://doi.org/10.1007/978-3-319-92267-6_16
Published:
Publisher Name: Springer, Cham
Print ISBN: 978-3-319-92266-9
Online ISBN: 978-3-319-92267-6
eBook Packages: EngineeringEngineering (R0)