Abstract
The methods of fission-track (FT) thermochronology, based on a combination of the external detector method, zeta calibration against independent age standards and measurements of horizontal confined track lengths, have undergone relatively little change over the last 25 years. This conventional approach has been highly successful and the foundation for important thermal history inversion methods, supporting an expanding range of geological applications. Several important new technologies have emerged in recent years, however, that are likely to have a disruptive effect on this relatively stable approach, including LA-ICP-MS analysis for 238U concentrations, new motorised digital microscopes and new software systems for microscope control, digital imaging and image analysis. These technologies allow for new image-based and highly automated approaches to FT dating and eliminate the need for neutron irradiations. Together they are likely to have a major influence on the future of FT analysis and gradually replace the older, highly laborious manual methods. Automation will facilitate the acquisition of larger and more comprehensive data sets than was previously possible, assist with standardisation and have important implications for training and distributed analysis based on image sharing. Track length measurements have been more difficult to automate, but 3D measurements and automated semi-track length measurements are likely to become part of future FT methods. Other important trends suggest that FT analysis will increasingly be combined with other isotopic dating methods on the same grains, and multi-system methods on coexisting minerals, to give much more comprehensive accounts of the thermal evolution of rocks. There are still a range of important fundamental issues in FT analysis that are poorly understood, such as a full understanding of the effects of composition and radiation damage on the annealing properties of different minerals, which are likely to be fruitful areas for future research in this field.
Keywords
- Laser Ablation Inductively Coupled Plasma Mass Spectrometry (LA-ICP-MS)
- Confined Track Lengths
- Zeta Calibration
- Fission Track (FT)
- External Detector Method (EDM)
These keywords were added by machine and not by the authors. This process is experimental and the keywords may be updated as the learning algorithm improves.
Access this chapter
Tax calculation will be finalised at checkout
Purchases are for personal use only
References
Afra B, Lang M, Rodriguez MD, Zhang J, Giulian JR, Kirby N, Ewing RC, Trautmann C, Toulemonde M, Kluth P (2011) Annealing kinetics of latent particle tracks in Durango apatite. Phys Rev B 83:064116
Barbarand J, Carter A, Hurford AJ (2003) Compositional and structural control of fission-track annealing in apatite. Chem Geol 198:107–137
Bernet M, Garver JI (2005) Fission-track analysis of detrital zircon. Rev Mineral Geochem 58:205–238
Booth JT, Jones J, Schaeffer K, Woodall K, Kumar R, Dodds Z, Donelick R (2015) Mapping for microscopes: automating apatite-image handling. Goldschmidt Abstr 2015:341
Braun J, van der Beek P, Valla P, Robert X, Herman F, Glotzbach C, Pedersen V, Perry C, Simon-Labric T, Prigent C (2012) Quantifying rates of landscape evolution and tectonic processes by thermochronology and numerical modeling of crustal heat transport using PECUBE. Tectonophysics 524–525:1–28
Carlson WD, Donelick RA, Ketcham RA (1999) Variability of apatite fission-track annealing kinetics: I. Experimental results. Am Mineral 84:1213–1223
Carrapa B, DeCelles PG, Reiners PW, Gehrels GE, Sudo M (2009) Apatite triple dating and white mica 40Ar/39Ar thermochronology of syntectonic detritus in the Central Andes: a multiphase tectonothermal history. Geology 37:407–410
Chew DM, Donelick RA (2012) Combined apatite fission track and U-Pb dating by LA-ICP-MS and its application in apatite provenance studies. Mineral Assoc Canada Short Course 42:219–247 (St Johns, NL)
Chew D, Donelick RA, Donelick MB, Kamber BS, Stock MJ (2014) Apatite chlorine concentration measurements by LA-ICP-MS. Geostand Geoanal Res 38:23–35
Chew D, Babechuk MG, Cogné N, Mark C, O’Sullivan GJ, Henrichs IA, Doepke D, McKenna CA (2016) (LA, Q)-ICPMS trace-element analyses of Durango and McClure Mountain apatite and implications for making natural LA-ICPMS mineral standards. Chem Geol 435:35–48
Dahl PS (1997) A crystal-chemical basis for Pb retention and fission-track annealing systematics in U-bearing minerals, with implications for geochronology. Ear Planet Sci Lett 150:277–290
Danišík M (2018) Chapter 5. Integration of fission-track thermochronology with other geochronologic methods on single crystals. In: Malusà MG, Fitzgerald PG (eds) Fission-track thermochronology and its application to geology. Springer, Berlin
Donelick RA (1993) Apatite etching characteristics versus chemical composition. Nucl Tracks Radiat Meas 21:604
Donelick A, Donelick R (2015) Machine learning applied to finding and characterizing the tips of etched fission tracks. Goldschmidt Abstr 2015:759
Donelick RA, O’Sullivan PB, Ketcham RA (2005) Apatite fission-track analysis. Rev Mineral Geochem 58:49–94
Dumitru TA (1993) A new computer-automated microscope stage system for fission-track analysis. Nucl Tracks Radiat Meas 21:575–580
Fleischer RL, Hart HR (1972) Fission track dating: techniques and problems. In: Bishop WW, Miller DA, Cole S (eds) Calibration of hominid evolution. Scottish Academic Press, Edinburgh, pp 135–170
Fleischer RL, Price PB, Walker RM (1975) Nuclear tracks in solids. University of California Press, Berkeley, p 605
Galbraith RF (1990) The radial plot; graphical assessment of spread in ages. Nucl Tracks Radiat Meas 17:207–214
Galbraith RF (2005) Statistics for fission track analysis. Chapman & Hall, Boca Raton, p 219
Gallagher K (2012) Transdimensional inverse thermal history modeling for quantitative thermochronology. J Geophys Res 117:B02408
Giese J, Seward D, Stuart FM, Wüthrich E, Gnos E, Kurz D, Eggenberger U, Schruers G (2010) Electrodynamic disaggregation: does it affect apatite fission-track and (U-Th)/He analyses? Geostand Geoanal Res 34:39–48
Gleadow AJW (1981) Fission-track dating methods: what are the real alternatives? Nucl Tracks 5:3–14
Gleadow AJW, Seiler C (2015) Fission track dating and thermochronology. In: Rink WJ, Thompson JW (eds) Encyclopedia of scientific dating methods. Springer, Dordrecht, pp 285–296
Gleadow AJW, Leigh-Jones P, Duddy IR, Lovering JF (1982) An automated microscope stage system for fission track dating and particle track mapping. In: Workshop on fission track dating. Fifth international conference on geochronology, cosmochronology and isotope geology, Nikko Japan, Abstract, pp 22–23
Gleadow AJW, Duddy IR, Green PF, Lovering JF (1986) Confined fission track lengths in apatite: a diagnostic tool for thermal history analysis. Contrib Mineral Petrol 94:405–415
Gleadow AJW, Belton DX, Kohn BP, Brown RW (2002) Fission track dating of phosphate minerals and the thermochronology of apatite. Rev Mineral Geochem 48:579–630
Gleadow AJW, Raza A, Kohn BP, Spencer SAS (2005) The potential of monazite for fission-track dating. Geochim Cosmochim Acta 69(Supp 1):A21
Gleadow AJW, Gleadow SJ, Belton DX, Kohn, BP, Krochmal MS (2009a) Coincidence Mapping, a key strategy for automated counting in fission track dating. In: Ventura B, Lisker F, Glasmacher UA (eds) Thermochronological methods: from palaeotemperature constraints to landscape evolution models, vol 324. Geological Society of London Special Publication, pp 25–36
Gleadow AJW, Gleadow SJ, Frei S, Kohlmann F, Kohn, BP (2009b) Automated analytical techniques for fission track thermochronology. Geochim Cosmochim Acta 73(Suppl):A441
Gleadow A, Harrison M, Kohn B, Lugo-Zazueta R, Phillips D (2015) The Fish Canyon Tuff: a new look at an old low-temperature thermochronology standard. Ear Planet Sci Lett 424:95–108
Goldoff B, Webster JD, Harlov DE (2012) Characterization of fluor-chlorapatites by electron probe microanalysis with a focus on time-dependent intensity variation in halogens. Am Mineral 97:1103–1115
Green PF, Duddy IR, Gleadow AJW, Tingate PR, Laslett GM (1985) Fission track annealing in apatite: track length measurements and the form of the Arrhenius plot. Nucl Tracks 10:323–328
Green PF, Duddy IR, Hegarty KA (2005) Comment on compositional and structural control of fission track annealing in apatite by Barbarand J, Carter A, Wood I, and Hurford AJ. Chem Geol 214:351–358
Haack U (1972) Systematics in the fission track annealing of minerals. Contrib Mineral Petrol 35:303–312
Hasebe N, Barberand J, Jarvis K, Carter A, Hurford AJ (2004) Apatite fission-track chronometry using laser ablation ICP-MS. Chem Geol 207:135–145
Hasebe N, Tamura A, Arai S (2013) Zeta equivalent fission-track dating using LA-ICP-MS and examples with simultaneous U-Pb dating. Island Arc 22:280–291
Hurford AJ (1998) Zeta: the ultimate solution to fission-track analysis calibration or just an interim measure? In: van den Haute P, De Corte F (eds) Advances in fission-track geochronology. Kluwer Academic Publishers, pp 19–32
Hurford AJ (2018) Chapter 1. An historical perspective on fission-track thermochronology. In: Malusà MG, Fitzgerald PG (eds) Fission-track thermochronology and its application to geology. Springer, Berlin
Hurford AJ, Green PF (1983) The zeta age calibration of fission track dating. Chem Geol (Isot Geosci Sect) 1:285–317
Jonckheere R, van den Haute P (2002) On the efficiency of fission-track counts in an internal and external apatite surface and in a muscovite external detector. Radiat Meas 35:29–40
Jonckheere R, Ratschbacher L, Wagner GA (2003) A repositioning technique for counting induced fission tracks in muscovite external detectors in single-grain dating of minerals with low and inhomogeneous uranium concentrations. Radiat Meas 37:217–219
Jonckheere R, Tamer M, Wauschkuhn F, Wauschkuhn B, Ratschbacher L (2017) Single-track length measurements of step-etched fission tracks in Durango apatite: Vorsprung durch Technik. Am Mineral (in press)
Ketcham RA (2005) Forward and inverse modeling of low-temperature thermochronometry data. Rev Mineral Geochem 58:275–314
Ketcham RA, Donelick RA, Balestrieri ML, Zattin M (2009) Reproducibility of apatite fission-track length data and thermal history reconstruction. Ear Planet Sci Lett 284:504–515
Ketcham RA, Carter A, Hurford AJ (2015) Inter-laboratory comparison of fission track confined length and etch figure measurements in apatite. Am Mineral 100:1452–1468
Kohn B, Chung L, Gleadow A (2018) Chapter 2. Fission-track analysis: field collection, sample preparation and data acquisition. In: Malusà MG, Fitzgerald PG (eds) Fission-track thermochronology and its application to geology. Springer, Berlin
Kumar R (2015) Machine learning applied to autonomous identification of fission tracks in apatite. Goldschmidt Abstr 2015:1712
Laslett GM, Galbraith RF (1996) Statistical properties of semi-tracks in fission track analysis. Radiat Meas 26:565–576
Laslett GM, Kendall WS, Gleadow AJW, Duddy IR (1982) Bias in measurement of fission track length distributions. Nucl Tracks 6:79–85
Li W, Wang L, Lang M, Trautmann C, Ewing RC (2011) Thermal annealing mechanisms of latent fission tracks: apatite vs. zircon. Ear Planet Sci Lett 302:227–235
Li W, Lang M, Gleadow AJW, Zdorovets MV, Ewing RC (2012) Thermal annealing of unetched fission tracks in apatite. Ear Planet Sci Lett 321–322:121–127
Naeser C, Dodge FCW (1969) Fission-track ages of accessory minerals from granitic rocks of the central Sierra Nevada Batholith, California. Geol Soc Am Bull 80:2201–2212
Peternell F, Kohlmann F, Wilson CJL, Gleadow AJW (2009) A new approach to crystallographic orientation measurement for apatite fission track analysis: effects of crystal morphology and implications for automation. Chem Geol 265:527–539
Reed L, Vigue K, Kumar R, Ndefo-Dahl A, Dodds Z, Donelick R (2014) Automated fission track and etch figure characterisation in apatite crystals (Abstract). In: 14th International conference on thermochronology, Chamonix, September 2014, p 23
Seiler C, Kohn B, Gleadow A (2014) Apatite fission track analysis by LA-ICP-MS: an evaluation of the absolute dating approach. In: 14th International conference on thermochronology, Chamonix, September 2014, pp 11–12
Shen CB, Donelick RA, O’Sullivan PB, Jonckheere R, Yang Z, She ZB, Miu XL, Ge X (2012) Provenance and hinterland exhumation from LA-ICP-MS zircon U-Pb and fission-track double dating of Cretaceous sediments in the Jianghan Basin, Yangtze block, central China. Sed Geol 281:194–207
Smith MJ, Leigh-Jones P (1985) An automated microscope scanning stage for fission track dating. Nucl Tracks 10:395–400
Soares CJ, Guedes S, Hadler JC, Mertz-Kraus R, Zack T, Iunes PJ (2014) Novel calibration for LA-ICP-MS-based fission-track thermochronology. Phys Chem Mineral 41:65–73
Spiegel C, Kohn B, Raza A, Rainer T, Gleadow A (2007) The effect of long-term low-temperature exposure on apatite fission track stability: a natural annealing experiment in the deep ocean. Geochim Cosmochim Acta 71:4512–4537
Vermeesch P (2017) Statistics for LA-ICP-MS based fission track dating. Chem Geol (in press)
Vermeesch P (2018) Chapter 6. Statistics for fission-track thermochronology. In: Malusà MG, Fitzgerald PG (eds) Fission-track thermochronology and its application to geology. Springer, Berlin
Vermeesch P, He J (2016) geochron@home: a crowdsourcing app for fission track dating. In: 15th International conference on thermochronology, Maresias, Brazil, September 2016, p 2
Wadatsumi K, Masumoto S (1990) Three-dimensional measurement of fission-tracks: principles and an example in zircon from the Fish Canyon Tuff. Nucl Tracks Radiat Meas 17:399–406
Wadatsumi K, Matsumoto S, Suzuki K (1988) Computerised image-processing: system for fission-track dating; system configuration and functions. J Geosci Osaka City Univ 31:19–46
Acknowledgements
Many of the ideas presented here have emerged from discussions with members of our research group at the University of Melbourne over many years, and we particularly thank David Belton, Rod Brown, Asaf Raza and Ling Chung for their input at various times. The group has received sustained funding to support its work over many years from the Australian Research Council (ARC) including grant LP0348767 with Autoscan Systems Pty Ltd which supported the initial development of automatic fission track counting. We also thank our software engineers, Stewart Gleadow, Artem Nicolayevski, Josh Torrance, Sumeet Ekbote and Tom Church who have implemented so much of our automated fission track analysis system. The group has also received support from the AuScope Program funded by the National Collaborative Research Infrastructure Strategy and the Education Investment Fund, which has provided dedicated LA-ICP-MS facilities and ongoing maintenance and operational support. Major equipment purchases for microscopes and laser ablation were also provided by ARC grant LE0882818. We thank Pieter Vermeesch and Noriko Hasebe for their very helpful reviews, which have significantly improved the manuscript.
Author information
Authors and Affiliations
Corresponding author
Editor information
Editors and Affiliations
Rights and permissions
Copyright information
© 2019 Springer International Publishing AG, part of Springer Nature
About this chapter
Cite this chapter
Gleadow, A., Kohn, B., Seiler, C. (2019). The Future of Fission-Track Thermochronology. In: Malusà, M., Fitzgerald, P. (eds) Fission-Track Thermochronology and its Application to Geology. Springer Textbooks in Earth Sciences, Geography and Environment. Springer, Cham. https://doi.org/10.1007/978-3-319-89421-8_4
Download citation
DOI: https://doi.org/10.1007/978-3-319-89421-8_4
Published:
Publisher Name: Springer, Cham
Print ISBN: 978-3-319-89419-5
Online ISBN: 978-3-319-89421-8
eBook Packages: Earth and Environmental ScienceEarth and Environmental Science (R0)