Analytical Prediction of the Flexural Response of External RC Joints with Smooth Rebars

  • G. Campione
  • F. Cannella
  • L. Cavaleri
  • L. La Mendola
  • A. Monaco
Conference paper
Part of the Lecture Notes in Civil Engineering book series (LNCE, volume 10)

Abstract

An analytical model in a closed form able to reproduce the monotonic flexural response of external R.C. beam-column joints with smooth rebars is presented. The column is subjected to a constant vertical load and the beam to a monotonically increasing lateral force applied at the tip. The model is based on the flexural behavior of the beam and the column determined adopting a concentrated plasticity hinge model including slippage of the main bars of the beam. A simplified bilinear moment-axial force domain is assumed to derive the ultimate moment associated with the design axial force. For the joint a simple continuum model is adopted to predict shear strength and panel distortion. Experimental data given in the literature are utilized to validate the model. Finally, the proposed model can be considered a useful instrument for preliminary static verification of existing external R.C. beam-column joints with smooth rebars.

Keywords

Joint Beam Column Shear Flexure Smooth rebars 

References

  1. ACI Committee 318 (2011) Building code requirements for structural concrete ACI 318 and commentary. American Concrete Institute, Farmington Hills, MichiganGoogle Scholar
  2. Attaalla SA (2004) General analytical model for nominal shear stress of type 2 normal-and high-strength concrete beam-column joints. ACI Struct J 101(1):65–75Google Scholar
  3. Bakir PG, Boduroğlu HM (2002) A new design equation for predicting the joint shear strength of monotonically loaded exterior beam–column joints. Eng Struct 24(8):1105–1117CrossRefGoogle Scholar
  4. Braga F, Gigliotti R, Laterza M (2009) R/C existing structures with smooth reinforcing bars: experimental behaviour of beam-column joints subject to cyclic lateral loads. Open Constr Build Technol J 3:52–67CrossRefGoogle Scholar
  5. Calvi GM, Pampanin S, Moratti M, Ward J, Magened G, Pavese A, Rasulo A (2001) Seismic vulnerability assessment of existing concrete buildings. Experimental tests on a three-story RC frame. Technical report, University of Pavia, Pavia, ItalyGoogle Scholar
  6. Calvi GM, Magenes G, Pampanin S (2002) Relevance of beam-column damage and collapse in RC frame assessment. J Earthq Eng 6(2):75–100Google Scholar
  7. Campione G (2015) Analytical prediction of load deflection curves of external steel fibers R/C beam–column joints under monotonic loading. Eng Struct 83:86–98CrossRefGoogle Scholar
  8. Ehsani MR, Wight JK (1985) Exterior reinforced beam-to-column connection subjected to earthquake-type loading. ACI Struct J 82:492–499Google Scholar
  9. Eurocode 8 (2005) Structures in seismic regions, European Committee for Standardization (CEN), ENV 2008Google Scholar
  10. Fabbrocino G, Verderame GM, Manfredi G, Cosenza E (2004) Structural models of critical regions in old type R.C. frames with smooth rebars. Eng Struct 26:2137–2148CrossRefGoogle Scholar
  11. Fib Bulletin No. 24 (2003) Seismic assessment and retrofit of reinforced concrete buildings. State-of-art report, 312 pages. ISBN 978-2-88394-064-2Google Scholar
  12. Hegger J, Sherif A, Roeser W (2003) Non seismic design of beam–column joints. ACI Struct J 100(5):654–64Google Scholar
  13. Hegger J, Sherif A, Roeser W (2004) Nonlinear finite element analysis of reinforced concrete beam-column connections. ACI Struct J 101(5):604–614Google Scholar
  14. Hwang SJ, Lee HJ (1999) Analytical model for predicting shear strength of exterior reinforced concrete beam-column joints for seismic resistance. ACI Struct J 96(5):846–858Google Scholar
  15. Lima C, Martinelli E, Faella C (2012a) Capacity models for shear strength of exterior joints in RC frames: state-of-the-art and synoptic examination. Bull Earthq Eng 10:967–983CrossRefGoogle Scholar
  16. Lima C, Martinelli E, Faella C (2012b) Capacity models for shear strength of exterior joints in RC frames: state-of-the-art and synoptic examination. Bull Earthq Eng 10:967–983.  https://doi.org/10.1007/s10518-012-9340-4CrossRefGoogle Scholar
  17. Lima C, Martinelli E, Faella C (2012c) Capacity models for shear strength of exterior joints in RC frames: experimental assessment and recalibration. Bull Earthq Eng 10:985–1007.  https://doi.org/10.1007/s10518-012-9342-2CrossRefGoogle Scholar
  18. Pampanin S, Calvi GM, Moratti M (2002) Seismic behaviour of R.C. beam-column joints designed for gravity loads. In: 12th European conference on earthquake engineering, Barbican Centre, London, UK, 9–13 September 2002. Paper Reference 726Google Scholar
  19. Park S, Mosalam KM (2012) Parameters for shear strength prediction of exterior beam–column joints without transverse reinforcement. Eng Struct 36:198–209CrossRefGoogle Scholar
  20. Park R, Paulay T (1975) Reinforced concrete structures. Wiley, New York, 769 ppGoogle Scholar
  21. Priestley MJN (1997) Displacement-based seismic assessment of reinforced concrete buildings. J Earthq Eng 1(1):157–192Google Scholar
  22. Pauletta M, Di Luca D, Russo G (2015) Exterior beam column joints – shear strength model and design formula. Eng Struct 94:70–81CrossRefGoogle Scholar
  23. Russo G, Pauletta M (2012) Seismic behavior of exterior beam-column connections with smooth rebars and effects of upgrade. ACI Struct J 109(2):225–233Google Scholar

Copyright information

© Springer International Publishing AG, part of Springer Nature 2018

Authors and Affiliations

  • G. Campione
    • 1
  • F. Cannella
    • 1
  • L. Cavaleri
    • 1
  • L. La Mendola
    • 1
  • A. Monaco
    • 1
  1. 1.Department of Civil, Environmental, Aerospace and Material EngineeringUniversity of PalermoPalermoItaly

Personalised recommendations