Skip to main content
SpringerLink
Log in
Book cover

Introduction to Mechanical Engineering pp 3–41Cite as

Mechanical Properties of Engineering Materials: Relevance in Design and Manufacturing

  • Chapter
  • First Online:

Part of the book series: Materials Forming, Machining and Tribology ((MFMT))

Abstract

The chapter provides an introduction to mechanical engineering, covering fundamental concepts of mechanical properties of materials and their use in the design and manufacturing. It first explains the notion of mechanical properties of materials and then elaborates on the proper definition of most relevant properties as well as materials testing to obtain these properties. The role of mechanical properties at the design stage in form of the design criterion is explained. The use of material properties to assess equivalent stress and strain in complex loading conditions is revealed. At the manufacturing stage, the notion of additive (material is added to the workpiece), neutral (the volume of the workpiece is preserved), and substantive (the volume of the workpiece is reduced) processes is introduced. The relevant properties of materials in the neutral (forming) and substantive (cutting) processes are considered.

This is a preview of subscription content, log in via an institution.

Chapter
USD   29.95
Price excludes VAT (USA)
  • Available as PDF
  • Read on any device
  • Instant download
  • Own it forever
eBook
USD   54.99
Price excludes VAT (USA)
  • Available as EPUB and PDF
  • Read on any device
  • Instant download
  • Own it forever
Softcover Book
USD   69.99
Price excludes VAT (USA)
  • Compact, lightweight edition
  • Dispatched in 3 to 5 business days
  • Free shipping worldwide - see info
Hardcover Book
USD   99.99
Price excludes VAT (USA)
  • Durable hardcover edition
  • Dispatched in 3 to 5 business days
  • Free shipping worldwide - see info

Tax calculation will be finalised at checkout

Purchases are for personal use only

Learn about institutional subscriptions

References

  1. Davis, J. R. (2004). Tensile testing (2nd ed.). Materials Park, OH: ASTM.

    Google Scholar 

  2. Dieter, G. (1976). Mechanical metallurgy (2nd ed.). New York: McGraw-Hill.

    Google Scholar 

  3. Zhu, X.-K., & Joyce, J. A. (2012). Review of fracture toughness (G, K, J, CTOD, CTOA) testing and standardization. Engineering Fracture Mechanics, 85, 1–46.

    Article  Google Scholar 

  4. Isakov, E. (2000). Mechanical properties of work materials. Cincinnati, OH: Hanser Gardener Publications.

    Google Scholar 

  5. von Mises, R. (1913). Mechanik der festen Körper im plastisch deformablen Zustand. Göttin Nachr Math Phys, 1, 582–592.

    MATH  Google Scholar 

  6. Hencky, H. Z. (1924). Zur theorie plastischer deformationen und hierduch im material hervorgerufenen nebenspannunger. Z Angerw Math Mech, 4, 323–334.

    Article  Google Scholar 

  7. Burdekin, F. M. (2007). General principles of the use of safety factors in design and assessment. Engineering Failure Analysis, 14, 420–433.

    Article  Google Scholar 

  8. Oberg, E. (Ed.) (2016). Machinery’s handbook. Technology & Engineering. Industrial Press: New York.

    Google Scholar 

  9. Groover, M. P. (2010). Fundamentals of modern manufacturing: materials, processes and systems (4th ed.). Hoboken, NJ: Wiley.

    Google Scholar 

  10. Atkins, A. G., & Mai, Y. W. (1985). Elastic and plastic fracture: metals, polymers. Ceramics, composites, biological materials. New York: Wiley.

    Google Scholar 

  11. Johnson, G. R., & Cook, W. H. (1983). A constructive model and data for metals subjected to large strains, high strain rates and high temperatures. In Proceedings of the 7th International Symposium on Ballistics, The Hague.

    Google Scholar 

  12. Keeler, S., & Backofen, W. (1963). Plastic instability and fracture in sheets stretched over rigid punches. ASM Trans Quart, 56(1), 25–48.

    Google Scholar 

  13. Goodwin, G. M. (1968). Application of strain analysis to sheet metal problems in press shop. Metallurgica Italiana, 60, 767–774.

    Google Scholar 

  14. Roll, K. (2008). Simulation of sheet metal forming—necessary developments in the future. In: LS-DYNA Anwenderforum (pp. A-1-59–A-1-68), Baberg.

    Google Scholar 

  15. Kalpakjian, S., & Schmid, S. R. (2001). Manufacturing engineering and technology (4th ed.). New Jersey: Prentice-Hall.

    Google Scholar 

  16. Taylor, F. W. (1907). On the art of cutting metals. Transactions of ASME, 28, 70–350.

    Google Scholar 

  17. Astakhov, V. P. (2010). Geometry of single-point turning tools and drills: Fundamentals and practical applications. London: Springer.

    Book  Google Scholar 

  18. Astakhov, V. P. (1998/1999). Metal cutting mechanics. Boca Raton, USA: CRC Press.

    Google Scholar 

  19. Astakhov, V. P. (2006). Tribology of metal cutting. London: Elsevier.

    Google Scholar 

  20. Abushawashi, Y., Xiao, X., & Astakhov, V. P. (2013). A novel approach for determining material constitutive parameters for a wide range of triaxiality under plane strain loading conditions. International Journal of Mechanical Sciences, 74, 133–142.

    Article  Google Scholar 

  21. Zhang, Y. C., Mabrouki, T., Nelias, D., & Gong, Y. D. (2011). Chip formation in orthogonal cutting considering interface limiting shear stress and damage evolution based on fracture energy approach. Finite Elements in Analysis and Design, 47, 860–863.

    Article  Google Scholar 

  22. Astakhov, V. P., & Xiao, X. (2008). A methodology for practical cutting force evaluation based on the energy spent in the cutting system. Machining Science and Technology, 12, 325–347.

    Article  Google Scholar 

  23. Astakhov, V.P., & Xiao, X. (2016). The principle of minimum strain energy to fracture of the work material and its application in modern cutting technologies. In J. P. Davim (Ed.), Metal cutting technology (pp. 1–35). Berlin: De Gruyter.

    Google Scholar 

  24. Bai, Y., & Wierzbicki, T. (2008). A new model of metal plasticity and fracture with pressure and Lode dependence. International Journal of Plasticity, 24(6), 1071–1096.

    Article  Google Scholar 

  25. Wierzbicki, T. B., Lee, Y. W., Bao, Y., & Bai, Y. (2005). Calibration and evaluation of seven fracture models. International Journal of Mechanical Science, 47, 719–743.

    Article  Google Scholar 

  26. Bai, Y., Teng, X., & Wierzbicki, T. (2009). On the application of stress triaxiality formula for plane strain fracture testing. Journal of Engineering Materials and Technology, 131, 021002.

    Article  Google Scholar 

  27. Teng, X., & Wierzbicki, T. (2006). Evaluation of six fracture models in high velocity perforation. Engineering Fracture Mechanics, 73(12), 1653–1678.

    Article  Google Scholar 

  28. Shaw, M. C. (2004). Metal cutting principles (2nd ed.). Oxford: Oxford University Press.

    Google Scholar 

Download references

Author information

Authors and Affiliations

  1. General Motors Business Unit of PSMi, 1792 Elk Ln, Okemos, MI, 48864, USA

    Viktor P. Astakhov

Authors
  1. Viktor P. Astakhov
    View author publications

    You can also search for this author in PubMed Google Scholar

Corresponding author

Correspondence to Viktor P. Astakhov .

Editor information

Editors and Affiliations

  1. Department of Mechanical Engineering, University of Aveiro, Aveiro, Portugal

    J. Paulo Davim

Glossary

A stress–strain diagram

A diagram in which corresponding values of stress and strain are plotted against each other. Values of stress are usually plotted as ordinates (vertically) and values of strain as abscissas (horizontally).

Cutting

Physical separation of a material into two or more parts.

Ductility

Ability of a material to deform plastically before fracturing.

Damage curve

Curve is obtained from the flow curve by adding the work material degradation and fracture regions.

Factor of safety (FoS) also known as safety factor (SF)

A term describing the structural capacity of a part or system beyond the expected loads or actual loads.

Flow curve

A curve in the true stress-true strain coordinate describing the material behavior up to fracture.

Forming processes

Manufacturing processes done through three-dimensional or plastic modification of a shape while retaining its mass and material cohesion

Fracture locus

An experimentally obtained curve representing the dependence of the strain at fracture on the state of stress.

Hardness

The resistance of a material to indenter penetration. Measured in MPa or GPa.

Metal cutting (machining)

Purposeful fracture of a thin layer on the workpiece by a wedge-shaped cutting tool occurring under a combined stress in the deformation zone in cyclic manner.

Modulus of elasticity

The slope of elastic segment of a stress–strain diagram. It is a measure of the stiffness of a solid material. Measured in GPa.

Poisson’s ratio

The ratio of the magnitude of the lateral contraction strain to the axial strain. Dimensionless.

Resilience

The strain energy stored by body up to elastic limit. Measured in J/m3.

Shear modulus

The slope of the elastic segment of a shear stress–strain diagram. Measured in GPa.

Shearing operations

Cutting operations the deformation and then separation of a material substance in which parallel surfaces are made to slide past one another.

Stress triaxiality state parameter

The ratio of the mean and equivalent stress. Used to characterize the state of stress.

True stress and true strain

Stress and strain determined based on the actual cross-sectional area of the specimen.

Toughness

The energy need to fracture of a unit volume of a material. Measured in J/m3.

von Mises stress criterion

States that yielding of a material occurs when the equivalent stress reaches the yield strength of the material in simple tension.

Ultimate shear strength

The shear maximum stress developed by the material before fracture based on the original cross-sectional area. Measured in MPa.

Ultimate tensile strength (UTS)

The maximum normal stress developed by the material before fracture based on the original cross-sectional area. Measured in MPa.

Yield shear strength

The shear stress at which a material exhibits a deviation from the proportionality of stress to strain. Measured in MPa.

Yield tensile strength

The normal stress at which a material exhibits a deviation from the proportionality of stress to strain, i.e., the occurrence permanents plastic strain is the case. Measured in MPa

Rights and permissions

Reprints and permissions

Copyright information

© 2018 Springer International Publishing AG, part of Springer Nature

About this chapter

Check for updates. Verify currency and authenticity via CrossMark

Cite this chapter

Astakhov, V.P. (2018). Mechanical Properties of Engineering Materials: Relevance in Design and Manufacturing. In: Davim, J. (eds) Introduction to Mechanical Engineering. Materials Forming, Machining and Tribology. Springer, Cham. https://doi.org/10.1007/978-3-319-78488-5_1

Download citation

  • DOI: https://doi.org/10.1007/978-3-319-78488-5_1

  • Published:

  • Publisher Name: Springer, Cham

  • Print ISBN: 978-3-319-78487-8

  • Online ISBN: 978-3-319-78488-5

  • eBook Packages: EngineeringEngineering (R0)

Publish with us

Policies and ethics

Search

Navigation