Advertisement

Development of Fiber-Reinforced Slag-Based Geopolymer Concrete Containing Lightweight Aggregates Produced by Granulation of Petrit-T

  • Mohammad Mastali
  • Katri Piekkari
  • Paivo Kinnunen
  • Mirja Illikainen
Conference paper

Abstract

Using by-products as alternatives to ordinary Portland cement (OPC) is attracting growing attention in the sustainable construction material sectors. Alkali-activated binders have been proposed and emerged as an alternative to OPC binders, which seem to have acceptable mechanical and durability performances in addition to positive environmental impacts. These alternative binders, also named “geopolymer,” use a wide range of aluminosilicate precursors, with differing availabilities, reactivates, costs, and CO2 emissions. The usage of various materials results in obtaining the locally adaptable mix compositions, which establishes a broader toolkit. In this study, Petrit-T as a by-product from manufacturing sponge iron with fine particle-size distribution and rich in calcium was used to prepare the structural lightweight aggregates. Moreover, ground-granulated blast-furnace slag (GGBFS) as the binder was activated by a combination of sodium hydroxide and sodium silicate as the alkali activator. The effects of using different fiber types, including PVA, PP, and basalt, on mechanical properties were investigated. Mechanical properties were addressed in terms of the compressive and flexural strengths. The results showed that reinforcing the composition significantly affected the flexural performance. Moreover, it was revealed that using the granulated Petrit-T presented a lightweight concrete, with density ρ ≤ 1600 kg/m3.

Notes

Acknowledgments

The study presented in this paper is a part of the research project “MINPET: mineral products from Petrit-T sidestream” that has received funding from the EIT RawMaterials, under grant agreement No. EIT/ EIT RAW MATERIALS/SGA2016/1.

References

  1. 1.
    Ye, H., Cartwright, C., Rajabipour, F., & Radlinska, A. (2014). Effect of dying rate on shrinkage of alkali –activated slag cements. 4th international conference on the durability of concrete structures, 24–26 July 2014, Purdue University, West Lafayette.Google Scholar
  2. 2.
    Collins, F. G., & Sanjayan, J. G. (1999). Workability and mechanical properties of alkali activated slag concrete. Cement and Concrete Research, 29, 455–458.CrossRefGoogle Scholar
  3. 3.
    Atiş, C. D., Bilim, C., Çelik, Ö., & Karahan, O. (2009). Influence of activator on the strength and drying shrinkage of alkali-activated slag mortar. Construction and Building Materials, 23, 548–555.CrossRefGoogle Scholar
  4. 4.
    ASTM C330/C330M-17a. (2017). Standard specification for lightweight aggregates for structural concrete. West Conshohocken: ASTM International.Google Scholar
  5. 5.
    Abdollahnejad, Z., Mastali, M., Mastali, M., & Dalvand, A. (2017). A comparative study on the effects of recycled glass fiber on drying shrinkage rate and mechanical properties of the self-compacting concrete and fly ash/slag geopolymer concrete. Journal of Materials in Civil Engineering.  https://doi.org/10.1061/(ASCE)MT.1943-5533.0001918.
  6. 6.
    Askari, M. A., Mastali, M., Dalvand, A., & Abdollahnejad, Z. (2017). Development of deflection hardening cementitious composites using glass fibres for flexural repairing/strengthening concrete beams: Experimental and numerical studies. European Journal of Environmental and Civil Engineering.  https://doi.org/10.1080/19648189.2017.1327888.
  7. 7.
    ASTM C78 / C78M-16. (2016). Standard test method for flexural strength of concrete (using simple beam with third-point loading). West Conshohocken: ASTM International.Google Scholar
  8. 8.
    ASTM C349-14. (2014). Standard test method for compressive strength of hydraulic-cement mortars (using portions of prisms broken in flexure). West Conshohocken: ASTM International.Google Scholar

Copyright information

© Springer International Publishing AG, part of Springer Nature 2018

Authors and Affiliations

  • Mohammad Mastali
    • 1
  • Katri Piekkari
    • 1
  • Paivo Kinnunen
    • 1
  • Mirja Illikainen
    • 1
  1. 1.Fibre and Particle Engineering, Faculty of Technology, University of OuluOuluFinland

Personalised recommendations