Advertisement

Stability of Latex in Cement Paste: Experimental Study and Theoretical Analysis

  • Dongdong Han
  • Weideng Chen
  • Shiyun Zhong
Conference paper

Abstract

To clarify the key factors affecting the stability of latex in cement paste, five latexes with varied hard and soft monomer contents were prepared, and the relationship between the stability of latex in cement paste and the amount of surfactant was investigated through flowability test and residue on sieve test. Besides, the amounts of surfactant required for covering the bare surface of polymer particles and the coefficient of restitution of polymer particles during collision process were calculated. Results show that the stability of latex in cement paste decreases with the increase of soft monomer content. Instead of the coverage ratio of surfactant on polymer particle, the coefficient of restitution of polymer particles determines the stability of latex in cement paste, and the higher coefficient of restitution contributes to the higher stability of latex in cement paste. These results provide some suggestions for the development of latex used for modification of cement-based materials.

References

  1. 1.
    ACI 548.3R-09. (2009). Report on polymer-modified concrete. Farmington Hills: American Concrete Institute.Google Scholar
  2. 2.
    Cai, Y., Wang, P. M., & Zhong, S. Y. (2015). Influence of coagulation of polymer dispersion on the properties of polymer-modified mortar. Advanced Materials Research, 1129, 162–168.CrossRefGoogle Scholar
  3. 3.
    Merlin, F., Guitouni, H., Mouhoubi, H., Mariot, S., Vallée, F., & Van, D. H. (2005). Adsorption and heterocoagulation of nonionic surfactants and latex particles on cement hydrates. Journal of Colloid and Interface Science, 281(1), 1–10.CrossRefGoogle Scholar
  4. 4.
    Zhao, W., Zhang, Y., Zhao, Y., & Zhang, H. (2014). Effects of twain-20 on performance of PB-g-PSG latex modified cement mortar and its mechanism of action. Journal of Building Materials, 17(4), 566–571.Google Scholar
  5. 5.
    Xu, J., Feng, Z. J., Fu, L. F., & Meng, W. K. (2015). A low Tg acrylate latex for cement-based materials and its preparation method. CN104530304A. Patent filled.Google Scholar
  6. 6.
    Han, D. D., Chen, W. D., & Zhong, S. Y. (2017). Physical retardation mechanism of latex polymer on the early hydration of cement. Advances in Cement Research.  https://doi.org/10.1680/jadcr.17.00055.
  7. 7.
    Han, D. D., Chen, W. D., Zhong, S. Y., & He, Y. (2017). Effects of nonionic surfactants and external factors on stability of latex in cement paste. Journal of Applied Polymer Science.  https://doi.org/10.1002/app.45946.
  8. 8.
    Zaccone, A., Wu, H., Marco Lattuada, A., & Morbidelli, M. (2008). Correlation between colloidal stability and surfactant adsorption/association phenomena studied by light scattering. Journal of Physical Chemistry B, 112(7), 1976–1986.CrossRefGoogle Scholar
  9. 9.
    Kronberg, B., Käil, L., & Stenius, P. (1981). Adsorption of nonionic surfactants on latexes. Journal of Dispersion Science and Technology, 2(2–3), 215–232.CrossRefGoogle Scholar
  10. 10.
    Roy, M. (1999). Dynamics of impact of sphere on flat surfaces of polymer matrix composites. Bulletin of Materials Science, 22(6), 1009–1012.MathSciNetCrossRefGoogle Scholar
  11. 11.
    Amitay-Sadovsky, E., & Wagner, H. D. (1998). Evaluation of young's modulus of polymers from knoop microindentation tests. Polymer, 39(11), 2387–2390.CrossRefGoogle Scholar

Copyright information

© Springer International Publishing AG, part of Springer Nature 2018

Authors and Affiliations

  • Dongdong Han
    • 1
  • Weideng Chen
    • 2
  • Shiyun Zhong
    • 1
  1. 1.Key Laboratory of Advanced Civil Engineering Materials, Ministry of Education, Tongji UniversityShanghaiChina
  2. 2.Fujian Academy of Building ResearchFuzhouChina

Personalised recommendations