Abstract
The aim of this research activity is to identify wall pressures which excite the structure, for automotive, aeronautic and naval domains, by using an inverse vibration method, such as FAT (Force Analysis Technique) and/or CFAT (Corrected Force Analysis Technique). The method is based on the local dynamic equilibrium equation of the structure, in which the partial derivatives are approximated by a finite difference scheme. Two schemes are proposed: the first (FAT method) consists in filtering the calculated force distribution by using an adequate spacing, but the associated wavenumber filtering presents a singularity at the flexural wavenumber of the structure, introducing an error around its value. The second uses a corrected finite difference scheme which acts as a complete low-pass wavenumber filter (CFAT method). In order to highlight the relevance of using both methods, results from simulations in the three industrial domains, automotive, aeronautic and naval are then presented where the comparison of FAT and CFAT results gives an interesting indicator to analyze the nature of the excitation. Moreover, for the naval application, a strategy for the identification of the strong fluid-structure coupling due to the pressure radiated by the structure is proposed. It is based on the identification of an effective wavenumber by using CFAT on a preliminary experiment where the structure immersed in the fluid is excited by a shaker. Finally, an experimental validation of the FAT/CFAT identification is shown for the car application. First, it is shown how both techniques identify very well the wall pressure on glass windows when the excitation is acoustic only (reverberant room). Second, the FAT/CFAT methods are applied to a car placed in a wind tunnel, where the analysis of results allows one to extract the whole acoustic component in a frequency range below the critical frequency of glass windows.
Access this chapter
Tax calculation will be finalised at checkout
Purchases are for personal use only
References
Pezerat, C., Guyader, J.L.: Two inverse methods for localization of external sources exciting a beam. Acta Acustica 3, 1–10 (1995)
Pezerat, C., Guyader, J.L.: Force analysis technique: reconstruction of force distribution on plates. Acust. U. Acta Acust. 86, 322–332 (2000)
Djamaa, M.S., Ouelaa, N., Pezerat, C., Guyader, J.L.: Mechanical radial force identification of a finite cylindrical shell by an inverse method. Acta Acust. 92(3), 398–405 (2006)
Djamaa, M.S., Ouelaa, N., Pezerat, C., Guyader, J.L.: Reconstruction of a distributed force applied on a thin cylindrical shell by an inverse method and spatial filtering. J. Sound Vib. 301(3–5), 560–575 (2007)
Renzi, C., Pezerat, C., Guyader, J.-L.: Vibratory source identification by using the finite element model of a subdomain of a flexural beam. J. Sound Vib. 332(3), 545–562 (2013)
Renzi, C., Pezerat, C., Guyader, J.-L.: Local force identification on flexural plates using reduced finite element models. Comput. Struct. 144, 75–91 (2014)
Chevillotte, F., Leclere, Q., Totaro, N., Pezerat, C., Souchotte, P., Robert, G.: Identification d’un champ de pression pariétale induit par un écoulement turbulent à partir de mesures vibratoires (Identification of a wall pressure field induced by a turbulent flow from vibration measurements), 10ème Congrès Français d’Acoustique, 12–16 avril. Lyon, France (2010)
Lecoq, D.: Identification par problème inverse vibratoire des bas nombres d’onde de pressions pariétales turbulentes (Identification of the low wavenumber components of turbulent wall pressures by an inverse problem), Ph.D. thesis, Université du Maine, Le Mans, France (2013)
Lecoq, D., Pezerat, C., Thomas, J.-H., Bi, W.: Extraction of the acoustic component of a turbulent flow exciting a plate by inverting the vibration problem. J. Sound Vib. 333(12), 2505–2519 (2014)
Lecoq, D., Pezerat, C., Chevillotte, F., Bessis, R.: Measurement of the low-wavenumber component within a turbulent wall pressure by an inverse problem of vibration. J. Acoust. Soc. Am. 140(3), 1974–1980 (2016)
Totaro, N., Pezerat, C., Leclere, Q., Lecoq, D., Chevillotte, F.: Identification of boundary pressure field exciting a plate under turbulent flow. In: Ciappi, E. et al. (eds.) Flinovia—Flow Induced Noise and Vibration Issues and Aspects. Springer International Publishing Switzerland (2015). ISBN: 978-3-319-09712-1. https://doi.org/10.1007/978-3-319-09713-8_9
Leclere, Q., Pezerat, C.: Vibration source identification using corrected finite difference schemes. J. Sound Vib. 331, 1366–1377 (2012)
Goody, M.: Empirical spectral model of surface pressure fluctuations. AIAA J. 42, 1788–1794 (2004)
Corcos, G.M.: Resolution of pressure in turbulence. J. Acoust. Soc. Am. 35, 192–199 (1963)
Arguillat, B., Ricot, D., Bailly, C., Robert, G.: Measured wavenumber: frequency spectrum associated with acoustic and aerodynamic wall pressure fluctuations. J. Acoust. Soc. Am. 128, 1647–1655 (2010)
Farabee, T.M.: T.M., Casarella M. J., Spectral features of wall pressure fluctuations beneath turbulent boundary layers. Phys. Fluids A: Fluid Dyn. 3, 2410 (1991)
Acknowledgements
This paper gives a synthesis of several projects. For automotive applications, the work is funded by the consortium “Le Mans Acoustics” and the CNRT R2A association linked to the common wind tunnel of PSA, Renault, Nissan and CNAM. The authors would also like to give a special thank to Renault who accepts to show the results obtained in the reverberant room. For naval and aeronautic applications, the work is funded by the French technological research institute IRT Jules Verne in the frame of the Chair program VIBROLEG (Vibroacoustics of lightweight structures) financially supported by Airbus, Daher, Naval Group, STX, General Electric, Cetim and Bureau Veritas and scientifically supported by the acoustic laboratory of Le Mans LAUM UMR CNRS 6613.
Author information
Authors and Affiliations
Corresponding author
Editor information
Editors and Affiliations
Rights and permissions
Copyright information
© 2019 Springer International Publishing AG, part of Springer Nature
About this paper
Cite this paper
Pezerat, C., Grosset, O., Carpentier, J., Thomas, JH., Ablitzer, F. (2019). Wall Pressure Identification by Using the Force Analysis Technique in Automotive, Naval and Aeronautic Applications. In: Ciappi, E., et al. Flinovia—Flow Induced Noise and Vibration Issues and Aspects-II. FLINOVIA 2017. Springer, Cham. https://doi.org/10.1007/978-3-319-76780-2_3
Download citation
DOI: https://doi.org/10.1007/978-3-319-76780-2_3
Published:
Publisher Name: Springer, Cham
Print ISBN: 978-3-319-76779-6
Online ISBN: 978-3-319-76780-2
eBook Packages: EngineeringEngineering (R0)